Using an inverter to power my CPAP

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Texas_incognito
Posts: 1
Joined: Wed Jun 13, 2012 9:07 pm

Using an inverter to power my CPAP

Post by Texas_incognito » Wed Jun 13, 2012 9:14 pm

I drive a truck for a living. I have a Remstar M plus with C-flex. I have a 400 watt inverter. However, utilizing the cigarette lighter the most I can hope for from my inverter is around 100 watts. If I do NOT use the heated humidifier, will the CPAP machine function correctly on 100 Watts? My pressure is set at 15, C-flex on 3 at sea level. Thank you in advance.

_________________
Mask

User avatar
physicsbob
Posts: 177
Joined: Sun Jan 10, 2010 10:40 pm
Location: Michigan

Re: Using an inverter to power my CPAP

Post by physicsbob » Wed Jun 13, 2012 9:27 pm

100 Watts should be enough, but the Remstar M and humidifier will run directly off 12 Volts. The sponsor of this board sells a very well made cord with a cigaret plug for $23.75 that is made for that Cpap.https://www.cpap.com/productpage/respir ... -cord.html . This will draw less power than a inverter.

_________________
Mask: Mirage Swift™ II Nasal Pillow CPAP Mask with Headgear
Humidifier: IntelliPAP Integrated Heated Humidifier
Additional Comments: Thermo controlled Reptile heated hose, Battery powered w Float Charger

User avatar
archangle
Posts: 9294
Joined: Sun Mar 27, 2011 11:55 am

Re: Using an inverter to power my CPAP

Post by archangle » Wed Jun 13, 2012 10:51 pm

Texas_incognito wrote:I drive a truck for a living. I have a Remstar M plus with C-flex. I have a 400 watt inverter. However, utilizing the cigarette lighter the most I can hope for from my inverter is around 100 watts. If I do NOT use the heated humidifier, will the CPAP machine function correctly on 100 Watts? My pressure is set at 15, C-flex on 3 at sea level. Thank you in advance.
If you use just the blower, not the humidifier, you should be OK on the inverter.

You may be OK with the humidifier, but it's complicated.

There are at least two flavors of M series humidifiers. In some of them, the humidifier runs off 120V AC. On later models, it runs off of DC.

Look on the back of the humidifier and see if there is one or two cords running from the power supply "brick" to the CPAP and the humidifier. (Not the cord running to the wall outlet, the cord or cords between the brick and your CPAP.)

If there are two cords, you have the AC powered humidifier. If there's just one cord, you have the DC version.

The AC version of the humidifier may not be safe to run on an inverter. It might damage the humidifier. I haven't seen any official statement from Respironics about that. Inverters tend to produce a non-standard "Modified Sine Wave" voltage that will damage some AC powered humidifiers.

If you have the DC version, it's probably safe to use the humidifier with the inverter.

If you use just the blower unit, an inverter should be OK.

My CPAP draws about 30 watts on the AC line even with the humidifier running, so you may have enough power to run the humidifier as long as it's the DC model.

If you use the DC cord, the Respironics M Series Provider manual says "When DC power is obtained from a vehicle battery, the device should not be used while the vehicle’s engine is running. Damage to the vehicle or the device may occur."

I might risk it myself, but I would not start the vehicle with the machine plugged in.

If you take the blower unit off of the humidifier, you have to have a little connector adapter that comes with the unit to hook up the hose, but lots of people lose it.

_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Also SleepyHead, PRS1 Auto, Respironics Auto M series, Legacy Auto, and Legacy Plus
Please enter your equipment in your profile so we can help you.
Click here for information on the most common alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check for yourself.

Useful Links.

User avatar
retrodave15
Posts: 402
Joined: Sun Nov 13, 2011 1:56 pm
Location: Newark, OH

Re: Using an inverter to power my CPAP

Post by retrodave15 » Thu Jun 14, 2012 6:54 am

I have a pure sine wave inverter in my motorcoach that I use to power my sensitive devices, computer and cpap when I am not on shore power. This is the one I have and it is expensive, but well worth it. http://www.amazon.com/dp/B0010X5KPG/ref ... wo=&hvqmt=

The cheaper inverters use a modified sine wave that is ok for some things like a curling iron or a hair dryer, but could fry or damage a computer. I have this wired directly into the battery system as it will draw quite a bit of power of the coaches batteries.

_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Additional Comments: Sleepy Head for Mac, Miami J C- Collar for post C-Spine Surgery recovery
Dave

Event Planner / Trade show Manager / Driver of the Winnebago


Newark, Ohio

Wife's Equipment: PRS1 AutoIQ w/ Cflex+, Swift FX for Her

User avatar
GumbyCT
Posts: 5776
Joined: Fri Sep 14, 2007 6:22 pm
Location: CT
Contact:

Re: Using an inverter to power my CPAP

Post by GumbyCT » Thu Jun 14, 2012 7:05 am

Texas_incognito wrote:I drive a truck for a living. I have a Remstar M plus with C-flex. I have a 400 watt inverter. However, utilizing the cigarette lighter the most I can hope for from my inverter is around 100 watts. If I do NOT use the heated humidifier, will the CPAP machine function correctly on 100 Watts? My pressure is set at 15, C-flex on 3 at sea level. Thank you in advance.
Since there is a power loss when using any inverter it is advisable to use directly on DC. Turn HH to zero if it also works on DC if you can tolerate passover will allow the longest use in this manner.

_________________
Humidifier: HC150 Heated Humidifier With Hose, 2 Chambers and Stand
Additional Comments: New users can't remember they can't remember YET!
BeganCPAP31Jan2007;AHI<0.5
I have no doubt, how I sleep affects every waking moment.
I am making progress-NOW I remember that I can't remember
;)
If this isn’t rocket science why are there so many spaceshots?
Be your own healthcare advocate!

User avatar
archangle
Posts: 9294
Joined: Sun Mar 27, 2011 11:55 am

Re: Using an inverter to power my CPAP

Post by archangle » Thu Jun 14, 2012 11:16 am

retrodave15 wrote:The cheaper inverters use a modified sine wave that is ok for some things like a curling iron or a hair dryer, but could fry or damage a computer.
Strangely enough, computers seem to handle MSW better than most gadgets.

It seems odd that the electric heaters on some CPAP humidifiers have trouble with MSW, but it's really the electronic control circuits that cause the problems. ResMed says MSW will damage an S8 humidifier.

_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Also SleepyHead, PRS1 Auto, Respironics Auto M series, Legacy Auto, and Legacy Plus
Please enter your equipment in your profile so we can help you.
Click here for information on the most common alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check for yourself.

Useful Links.

vpdavid
Posts: 1
Joined: Sun Sep 03, 2017 5:16 am

Re: Using an inverter to power my CPAP

Post by vpdavid » Sun Sep 10, 2017 1:24 am

First of all, you have to know that your device can run on DC power or not....... if it runs on DC power then you can directly connect with your battery as well. 12V battery can be helpful to run such machines as well. If you use DC power then there is no requirement of any inverter. Main task of an inverter is converting current from DC to AC.
Last edited by vpdavid on Tue Sep 19, 2017 2:15 am, edited 1 time in total.

User avatar
chunkyfrog
Posts: 34390
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nebraska--I am sworn to keep the secret of this paradise.

Re: Using an inverter to power my CPAP

Post by chunkyfrog » Sun Sep 10, 2017 3:59 pm

Any inverter that does not produce a pure sine wave, but is labeled as such,
is in violation of product labeling and safety regulations--
and the manufacturer can be held liable for damage.
Read the fine print very carefully--especially if the price seems too good to be true.
Peer UNDER any odd stickers--the truth is often hidden there.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her