kslabranche wrote:No need to be rude! I did create an account before replying and I did go to the link which only talked about getting to the menu. I would like the actual manual ASAP since my husband's machine is not staying on and the DME and Resmed have no one available to help. I will mess you you Sherriff... I appreciate your help verses being a jerk to a new person.
How often is it turning off?
If it's a hardware problem that's a problem that can't be solved with a manual.
If it's due to a LENGTHY "large leak" and the machine is configured to turn off on large leaks, then YES, that can be reconfigured.
Here's some quick instructions to get into the setup:
ResMed S9 AutoSet & Elite:
Plug in machine and turn the Push Dial until the device is showing the Home position (Home Icon illuminated).
In Home position, press the Push Dial and the Setup Menu buttons down simultaneously for 3 seconds.
The clinician menu will appear.
Select parameter(s) you wish to modify with the Push Dial (push down to select, turn to modify).
When done, select the <<home choice from the displayed menu and the adjustment is saved.
(4) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 12 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05