ResScan 3.12 buggy?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
hobbs
Posts: 874
Joined: Thu Jan 31, 2008 9:00 pm

ResScan 3.12 buggy?

Post by hobbs » Thu Nov 11, 2010 9:34 pm

Anyone else have problems with ver. 3.12? I had to go back to 3.11. Maybe it was just a bad install. When set to L/sec, it read L/min.

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ N10 Nasal CPAP Mask with Headgear
Additional Comments: S8 Autoset II for travel
Top
User avatar
idamtnboy
Posts: 2186
Joined: Mon Nov 01, 2010 2:12 pm
Location: Idaho

Re: ResScan 3.12 buggy?

Post by idamtnboy » Thu Nov 11, 2010 10:48 pm

hobbs wrote:Anyone else have problems with ver. 3.12? I had to go back to 3.11. Maybe it was just a bad install. When set to L/sec, it read L/min.
You went to Tools/Options to change it, right? Did you click on Apply after changing it? It changes for me w/ 3.12.

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Hose management - rubber band tied to casement window crank handle! Hey, it works! S/W is 3.13, not 3.7
Top
User avatar
hobbs
Posts: 874
Joined: Thu Jan 31, 2008 9:00 pm

Re: ResScan 3.12 buggy?

Post by hobbs » Thu Nov 11, 2010 11:29 pm

idamtnboy wrote:
hobbs wrote:Anyone else have problems with ver. 3.12? I had to go back to 3.11. Maybe it was just a bad install. When set to L/sec, it read L/min.
You went to Tools/Options to change it, right? Did you click on Apply after changing it? It changes for me w/ 3.12.
Yes, yes and still did not display correctly.

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ N10 Nasal CPAP Mask with Headgear
Additional Comments: S8 Autoset II for travel
Top
User avatar
idamtnboy
Posts: 2186
Joined: Mon Nov 01, 2010 2:12 pm
Location: Idaho

Re: ResScan 3.12 buggy?

Post by idamtnboy » Fri Nov 12, 2010 1:21 am

hobbs wrote:
idamtnboy wrote:
hobbs wrote:Anyone else have problems with ver. 3.12? I had to go back to 3.11. Maybe it was just a bad install. When set to L/sec, it read L/min.
You went to Tools/Options to change it, right? Did you click on Apply after changing it? It changes for me w/ 3.12.
Yes, yes and still did not display correctly.
Coupled with the problem I'm having with the time ruler not displaying correctly I believe the graphics rendering engine in Resscan has real problems. I'll give version 3.11 a try and see what happens. I'll then reinstall 3.12 and see if the same problem shows up again.

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Hose management - rubber band tied to casement window crank handle! Hey, it works! S/W is 3.13, not 3.7
Top
drgbfax
Posts: 1
Joined: Wed Nov 17, 2010 2:27 am

Re: ResScan 3.12 buggy?

Post by drgbfax » Thu Nov 18, 2010 10:15 pm

please advise how to try ResScan 3.12
Top
User avatar
idamtnboy
Posts: 2186
Joined: Mon Nov 01, 2010 2:12 pm
Location: Idaho

Re: ResScan 3.12 buggy?

Post by idamtnboy » Thu Nov 18, 2010 10:51 pm

hobbs wrote:
idamtnboy wrote:
hobbs wrote:Anyone else have problems with ver. 3.12? I had to go back to 3.11. Maybe it was just a bad install. When set to L/sec, it read L/min.
You went to Tools/Options to change it, right? Did you click on Apply after changing it? It changes for me w/ 3.12.
Yes, yes and still did not display correctly.
Maybe you're seeing the same type of problem I'm apparently encountering, s/w conflict with ???? I installed 3.12 on my laptop. The rulers are correct. Apparently there is some sort of a conflict with some piece of software from some other program on my PC because others have not seen the same problem, and it doesn't show on my laptop. Also, 3.11 has bad rulers on my PC. That's what I'm running right now. Don't see any great reason to go back to 3.12.

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Hose management - rubber band tied to casement window crank handle! Hey, it works! S/W is 3.13, not 3.7
Top
User avatar
idamtnboy
Posts: 2186
Joined: Mon Nov 01, 2010 2:12 pm
Location: Idaho

Re: ResScan 3.12 buggy?

Post by idamtnboy » Thu Nov 18, 2010 10:56 pm

drgbfax wrote:please advise how to try ResScan 3.12
Search the messages for 31302_ResScan_3.12.exe. That should find you a post by uncle_bob with the link in it. Download and install. If you have an earlier version already installed uninstall it first. Are you familiar w/ Resscan?

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Hose management - rubber band tied to casement window crank handle! Hey, it works! S/W is 3.13, not 3.7
Top


Return to “CPAP and Sleep Apnea Message Board”