I use a hanger and have never come close pulling the CPAP off the nightstand. The pic shows my Dream Station 2 (backwards on the nightstand), but I have also had my AS10 hooked up the same way. The hose loop that is on the side of the CPAP has sufficient weight that it usually pulls up the slack on the mask side so the excess hose doesn't drop down to my head or the pillow.
Cpap "flipping" over
Re: Cpap "flipping" over
_________________
Machine: DreamStation 2 Auto CPAP Advanced with Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Resmed AirSense 10 Auto with Humidifier |
Re: Cpap "flipping" over
That's VERY similar to my setup except for the hanger. The hook that I mentioned is in the same location as your hanger and works the same.Grumpy48 wrote: ↑Sat Aug 27, 2022 9:00 amI use a hanger and have never come close pulling the CPAP off the nightstand. The pic shows my Dream Station 2 (backwards on the nightstand), but I have also had my AS10 hooked up the same way. The hose loop that is on the side of the CPAP has sufficient weight that it usually pulls up the slack on the mask side so the excess hose doesn't drop down to my head or the pillow.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Humidifier: HumidAire H4i™ Heated Humidifier |
ResMed AirCurve 10 Vauto Swift FX
Do not regret growing older. It is a privilege denied to many...
Do not regret growing older. It is a privilege denied to many...
Re: Cpap "flipping" over
I turned my S9 around so the hose connection is on the side convenient for me. Love the silicone mats! Also use Velcro hook tape to "anchor" the hose as needed.Centennial1 wrote: ↑Fri Aug 26, 2022 5:01 pmTried that and have been using a non-slip mat for years. But with the hose connection on the back, the non-slip does not prevent the cpap from rolling over.babydinosnoreless wrote: ↑Fri Aug 26, 2022 1:25 pmI put a rubber matt under mine (the kind you use to keep dog bowls from slipping around). I haven't flipped it since.
_________________
Mask: Hybrid Full Face CPAP Mask with Nasal Pillows and Headgear |
Humidifier: HumidAire H4i™ Heated Humidifier |
Additional Comments: Started Aug '07 CPAP Escape at 11 then 9, S9 APAP range 9.8-16, now 10-17 |
ResMed S9 range 9.8-17, RespCare Hybrid FFM
Never, never, never, never say never.
Never, never, never, never say never.
Re: Cpap "flipping" over
This is what I use to hold the hose up. Slip the hose thru a large rubber band, a hair scrunchie, or whatever you have available.
viewtopic.php?f=1&t=73964&p=679318#p679318
Doesn't take up much room when traveling either, can easily fit in the travel bag.
viewtopic.php?f=1&t=73964&p=679318#p679318
Doesn't take up much room when traveling either, can easily fit in the travel bag.
_________________
Humidifier: HC150 Heated Humidifier With Hose, 2 Chambers and Stand |
Additional Comments: New users can't remember they can't remember YET! |
BeganCPAP31Jan2007;AHI<0.5
I have no doubt, how I sleep affects every waking moment.
I am making progress-NOW I remember that I can't remember
If this isn’t rocket science why are there so many spaceshots?
Be your own healthcare advocate!
I have no doubt, how I sleep affects every waking moment.
I am making progress-NOW I remember that I can't remember
If this isn’t rocket science why are there so many spaceshots?
Be your own healthcare advocate!
-
- Posts: 19
- Joined: Fri Aug 26, 2022 7:07 am
Re: Cpap "flipping" over
I keep my Resmed 11 on the floor, rather than elevated on a nightstand. Does that make any difference (in performance)?
Anyways, I think I've solved the issue of the 11 flipping over by placing a 2X2 square of Velcro on the bottom of the resmed and on the floor.
Works very well thus far.
Anyways, I think I've solved the issue of the 11 flipping over by placing a 2X2 square of Velcro on the bottom of the resmed and on the floor.
Works very well thus far.
Re: Cpap "flipping" over
No...where the machine is placed doesn't affect performance or function.Centennial1 wrote: ↑Tue Aug 30, 2022 8:37 pmI keep my Resmed 11 on the floor, rather than elevated on a nightstand. Does that make any difference (in performance)?
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
Re: Cpap "flipping" over
I put velcro tape strips under the machine and on my nightstand. The machine isn't going to come off from accidently pulling on it.
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Additional Comments: Trying my best to get quality rest. PR System ONE REMstar BiPAP Auto SV Advanced |
System One Respironics Bipap AutoSV Advanced Quattro Fx
Min EPAP: 13.0 CmH20
Min Pressure Support: 3.5
Max EPAP: 25.0
Max Pressure Support: 5.0
Max Pressure: 20.0
Flex Setting: Bi-Flex - 3
Backup Rate:Auto
Humidification Mode:off
Humidifier Setting:c5
Min EPAP: 13.0 CmH20
Min Pressure Support: 3.5
Max EPAP: 25.0
Max Pressure Support: 5.0
Max Pressure: 20.0
Flex Setting: Bi-Flex - 3
Backup Rate:Auto
Humidification Mode:off
Humidifier Setting:c5