DIY CPAP?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
Highlancer
Posts: 1
Joined: Wed Aug 11, 2021 10:06 am

DIY CPAP?

Post by Highlancer » Wed Aug 11, 2021 10:16 am

I was recently (July) diagnosed with severe obstructive sleep apena, ~40 event/hr. There is a nationwide shortage on CPAPs, as most of you may be aware, and I don't want to wait the weeks it will take to get one. I am struggling so hard to function in life right now and really can't afford to continue this way. So here is the heart of the question, should I buy a $150 used Resmed Airsense 10 autoset CPAP off Craigslist and set it up on my own in the interim?

This is the pulmonologist recommendations:
1. How to treat this patient would depend on his symptoms and preferences but include options such as surgery, hypoglossal nerve stimulator, strict positional therapy, mandibular advancement device and auto-titrating CPAP.
2. Based on the severity of the patient's sleep apnea I would recommend auto-titrating CPAP from 5 to 15 with 2 cm of C-flex/EPR with heated humidity and compliance monitoring.
3. The patient should attempt to lose weight to achieve or continue to maintain a normal body mass index.
4. The patient should abstain from alcohol and centrally acting medications.
5. Encourage the patient to ensure there is sufficient opportunity for sleep each day and discuss sleep hygiene as needed.

I have no idea what goes into setting up the machine, etc. so that's why I am asking here!
Thanks in advance!

User avatar
Pugsy
Posts: 64624
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: DIY CPAP?

Post by Pugsy » Wed Aug 11, 2021 10:40 am

Buy the cheap machine on your local craigslist.
Confirm it is indeed the AirSense 10 AutoSet and it appears to be working properly and if you are sensitive to cigarette smoke...check it ahead of time. It's a deal breaker for some people when it stinks.

Get the OSCAR software...
OSCAR https://www.sleepfiles.com/OSCAR/
http://www.apneaboard.com/wiki/index.ph ... stallation
http://www.apneaboard.com/wiki/index.ph ... rpretation

Get this manual so you can learn the secret handshake for getting into the clinical setup menu area.
page 14 I think
https://www.respshop.com/manuals/ResMed ... %20her.pdf

Start with what the doctor ordered if you wish but I actually would suggest something a little different and might be a little more comfortable.
Minimum 6
Max 15
EPR....on ...full time and set to 2
With the minimum at 5 you really can't appreciate EPR much. I like 6 better for newbies.

We can help with further adjustments. It's easy...not difficult at all and we can usually come up with optimal pressures in just a handful of nights and sometimes we get lucky right off the bat.
Lots of people self treat like this. Not a big deal at all.
You can do it...just takes a bit of education.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
zonker
Posts: 11157
Joined: Fri Jun 19, 2015 4:36 pm

Re: DIY CPAP?

Post by zonker » Wed Aug 11, 2021 10:46 am

Highlancer wrote:
Wed Aug 11, 2021 10:16 am

5. Encourage the patient to ensure there is sufficient opportunity for sleep each day and discuss sleep hygiene as needed.

welcome to the zoo!

many have done what you are about to do. you are in good hands with pugsy!

just wanted to chime in because #5 caught my eye.

sleep hygiene-

• Keep a consistent sleep schedule. Get up at the same time every day, even on weekends or during vacations.

• Set a bedtime that is early enough for you to get at least 7 hours of sleep.

• Don’t go to bed unless you are sleepy.

• If you don’t fall asleep after 20 minutes, get out of bed.

• Establish a relaxing bedtime routine.

• Use your bed only for sleep and sex.

• Make your bedroom quiet and relaxing. Keep the room at a comfortable, cool temperature.

• Limit exposure to bright light in the evenings.

• Turn off electronic devices at least 30 minutes before bedtime.

• Don’t eat a large meal before bedtime. If you are hungry at night, eat a light, healthy snack.

• Exercise regularly and maintain a healthy diet.

• Avoid consuming caffeine in the late afternoon or evening.

• Avoid consuming alcohol before bedtime.

• Reduce your fluid intake before bedtime.


good luck!
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg

User avatar
ChicagoGranny
Posts: 14855
Joined: Sun Jan 29, 2012 1:43 pm
Location: USA

Re: DIY CPAP?

Post by ChicagoGranny » Wed Aug 11, 2021 11:34 am

Highlancer wrote:
Wed Aug 11, 2021 10:16 am
strict positional therapy
Until you can get your CPAP therapy working, avoid backsleeping. Sleep on your sides or stomach. OSA tends to be much worse when backsleeping.

If that CPAP machine is in good shape, the price is a good deal. Better hurry.

RipVW
Posts: 1684
Joined: Tue Oct 09, 2007 7:29 pm
Location: USA
Contact:

Re: DIY CPAP?

Post by RipVW » Sun Aug 15, 2021 3:48 pm

Pugsy wrote:
Wed Aug 11, 2021 10:40 am

Get the OSCAR software...
OSCAR https://www.sleepfiles.com/OSCAR/
http://www.apneaboard.com/wiki/index.ph ... stallation
http://www.apneaboard.com/wiki/index.ph ... rpretation

Get this manual so you can learn the secret handshake for getting into the clinical setup menu area.
page 14 I think
https://www.respshop.com/manuals/ResMed ... %20her.pdf
Thanks, Pugsy! I just ordered my AirSense 10 from cpap.com, after learning about the recall on my System One. Pretty scary recall! Great to see you again! RipVW
Check out my chinstrap--> http://cpapchinstraps.com
Image

User avatar
Pugsy
Posts: 64624
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: DIY CPAP?

Post by Pugsy » Sun Aug 15, 2021 4:08 pm

RipVW wrote:
Sun Aug 15, 2021 3:48 pm
Great to see you again! RipVW
Good to see you again. It's been a while. Happy to know you are still alive and kicking.
Guess you will have to go changing your massive signature line...more work. :lol:
I always knew a post was from you without looking at name just by your signature.

If you run into trouble let me know but I just imagine you will do just fine with it.
I don't know your settings or if you are like me or not but I found that with the ResMed algorithm in auto mode I could lower my minimum about 3 cm and get the same decent results from what I used with the Respironics auto some years back.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

RipVW
Posts: 1684
Joined: Tue Oct 09, 2007 7:29 pm
Location: USA
Contact:

Re: DIY CPAP?

Post by RipVW » Sun Aug 15, 2021 5:59 pm

Thanks for the tip! I'll give that a try when I set mine up Wednesday.

RipVW
Check out my chinstrap--> http://cpapchinstraps.com
Image