My resmed shuts down when it gets cold

I notice when it gets to 14´ Celsius and my CPAP machine power adapter and machine get cold it shuts down and gotta warm them up for it to work when unplugged and replugged.

That's 57 degrees in Farenheit. We turn our heat down to 55 degrees at night, and I've never had that issue. It gets that cold in our room sometimes. You might talk to your provider or to ResMed about this.

Sleeptalker93 wrote: ↑

Tue Apr 09, 2024 8:40 am

I notice when it gets to 14´ Celsius and my CPAP machine power adapter and machine get cold it shuts down and gotta warm them up for it to work when unplugged and replugged.

Environmental conditions
Operating temperature: +5°C to +35°C
Note: The air flow for breathing produced by this therapy
device can be higher than the temperature of the room.
Under extreme ambient temperature conditions (40°C) the
device remains safe.
Operating humidity: 10 to 95% relative humidity, non-condensing
Operating altitude: Sea level to 2,591 m; air pressure range 1013 hPa to
738 hPa
Storage and transport temperature: -20°C to +60°C
Storage and transport humidity: 5 to 95% relative humidity, non-condensing

Sleeptalker93 wrote: ↑

Tue Apr 09, 2024 8:40 am

I notice when it gets to 14´ Celsius and my CPAP machine power adapter and machine get cold it shuts down and gotta warm them up for it to work when unplugged and replugged.

In what way does it shut down? No power at all or the machine still has lights but just won't blow?

Sleeptalker93 wrote: ↑

Tue Apr 09, 2024 8:40 am

I notice when it gets to 14´ Celsius and my CPAP machine power adapter and machine get cold it shuts down and gotta warm them up for it to work when unplugged and replugged.

I'm wondering if you're having a problem with the power supply dropping low?
Any idea what the AC voltage is doing when this cpap shuts down?

Where are you sleeping when it gets to 14´ Celsius?

Conrad wrote: ↑

Wed Apr 10, 2024 7:07 am

Sleeptalker93 wrote: ↑

Tue Apr 09, 2024 8:40 am

I notice when it gets to 14´ Celsius and my CPAP machine power adapter and machine get cold it shuts down and gotta warm them up for it to work when unplugged and replugged.

In what way does it shut down? No power at all or the machine still has lights but just won't blow?

No power at all!

Check the cord going into the brick. Insert tightly.

Sleeptalker93 wrote: ↑

Thu Apr 11, 2024 10:03 am

Conrad wrote: ↑

Wed Apr 10, 2024 7:07 am

Sleeptalker93 wrote: ↑

Tue Apr 09, 2024 8:40 am

I notice when it gets to 14´ Celsius and my CPAP machine power adapter and machine get cold it shuts down and gotta warm them up for it to work when unplugged and replugged.

In what way does it shut down? No power at all or the machine still has lights but just won't blow?

No power at all!

As Vandownbytheriver said above, check the power cords, the one from the wall to the brick and the cord from the brick to the machine. It sounds like a power supply issue.