I actually have three separate ResMed 10 Autoset machines... the one originally obtained from my DME and two purchased for various reasons from our LSAT. The two that were used regularly in my winter home in Florida and summer abode in MA both gave the information on shutdown of hours used and events per hour for a few seconds.
I set up the third Autoset the other day, and when I shut it down, no events per hour, just hours used and a happy face for mask fit . How can I get my events per hour? There is no SD card in the machine, but that shouldn't matter.
Quick Airsense 10 Autoset Question
-
- Posts: 209
- Joined: Tue Feb 11, 2014 6:03 pm
- Location: MA
Quick Airsense 10 Autoset Question
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Humidifier: XT Heated Humidifier |
Additional Comments: Sleepyhead software via SD card |
Re: Quick Airsense 10 Autoset Question
Hold down both buttons to enter the clinical menu, and then you can set it up to show reports from there. I think . . .
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: DreamWear Nasal CPAP Mask with Headgear |
What you need to know before you meet your DME http://tinyurl.com/2arffqx
Taming the Mirage Quattro http://tinyurl.com/2ft3lh8
Swift FX Fitting Guide http://tinyurl.com/22ur9ts
Don't Pay that Upcharge! http://tinyurl.com/2ck48rm
Taming the Mirage Quattro http://tinyurl.com/2ft3lh8
Swift FX Fitting Guide http://tinyurl.com/22ur9ts
Don't Pay that Upcharge! http://tinyurl.com/2ck48rm
Re: Quick Airsense 10 Autoset Question
Essentials menu setting in the clinical setup menu area has to be set to "Plus" to get the sleep report details on the LCD screen.
The default is for it to be set to "On" and all that shows is hours of use.
The default is for it to be set to "On" and all that shows is hours of use.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
-
- Posts: 209
- Joined: Tue Feb 11, 2014 6:03 pm
- Location: MA
Re: Quick Airsense 10 Autoset Question
Thank you, Pugsy.
_________________
Machine: AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P30i Nasal Pillow CPAP Mask with Headgear Starter Pack |
Humidifier: XT Heated Humidifier |
Additional Comments: Sleepyhead software via SD card |
- SJ-Paddler
- Posts: 97
- Joined: Wed Feb 09, 2022 2:29 pm
- Location: South Jersey
Re: Quick Airsense 10 Autoset Question
Wow, I did not know what I did not know. Have to try that out. How about finding out your usage hours?
Any other Airsense 10 secrets?
Any other Airsense 10 secrets?
Mask: Dreamware Silicone Nasal Pillows
Machine: ResMed Airsense 10 Autoset (For Him)
APAP Pressure: 13 cm - 15 cm / Average 13.3 cm / 3 cm EPR Pressure Relief
Machine: ResMed Airsense 10 Autoset (For Him)
APAP Pressure: 13 cm - 15 cm / Average 13.3 cm / 3 cm EPR Pressure Relief
Re: Quick Airsense 10 Autoset Question
Learned something new today. Thanks!
Now I dont have to go to the clinician menu to get the info for the night. I didn't know what "Essentials Plus" was all about till now.
SJ Paddler: to find your Total usage hours, go to the clinician menu (push the round and home simultaneously for about 5 seconds), select My Options, scroll down to bottom of list to About, select About, scroll down to hours.
Now I dont have to go to the clinician menu to get the info for the night. I didn't know what "Essentials Plus" was all about till now.
SJ Paddler: to find your Total usage hours, go to the clinician menu (push the round and home simultaneously for about 5 seconds), select My Options, scroll down to bottom of list to About, select About, scroll down to hours.