Goodnight 420E what does IFL 1&2 do?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
FoolsGold
Posts: 5
Joined: Sat Oct 16, 2004 6:57 pm

Goodnight 420E what does IFL 1&2 do?

Post by FoolsGold » Sat Oct 16, 2004 7:02 pm

If the IFL 1 and 2 are each left blank, what will happen when the machine detects an apnea whether it thinks its a central apnea or an obstructive apnea?

User avatar
Titrator
Posts: 580
Joined: Tue Aug 24, 2004 1:58 pm
Location: Oak Ridge, TN

Repy to Foolsgold

Post by Titrator » Sat Oct 16, 2004 9:57 pm

Greetings Foolsgold.,

Welcome to cpaptalk.com. We are very proud of this site and how fast it has grown. Please feel free to post anytime.

Below is the answer to your question about the 420 Evolution by Puritan Bennett.

INF 1 and INF 2 have nothing to do with apnea. They have everything to do with hypopnea, flow limitations and Snorer.

INF 1 Flow Limitation cycles
INF 2 Flow Limitation cycles with an amplitude decrease

You must have the "command on apnea" setting selected or the machine will not react to an apnea over 10cm. Set "command on apnea" to your regularly titrated cpap pressure and then use the INF's to reduce hypopnea, snore and flow limitations

The 420E is smart enough to sense a central apnea and reduce the pressure. Puritan Bennet autopaps had this ability back in the 418P days.

Regards,

Ted the Titrator

_________________
Humidifier: IntelliPAP Integrated Heated Humidifier
Additional Comments: Patiently waiting for the Intellipap Auto Software

FoolsGold
Posts: 5
Joined: Sat Oct 16, 2004 6:57 pm

Re: Repy to Foolsgold

Post by FoolsGold » Sun Oct 17, 2004 11:03 am

Titrator wrote:Set "command on apnea" to your regularly titrated cpap pressure and then use the INF's to reduce hypopnea, snore and flow limitations
Last night's values were:

Apneas........ 36 6.3/hr
Apneas
w/Cardiac... 13 2.3
Hypopneas....37 6.5
Hypopneas
w/ FL ............9 1.6
AcousVibes....322 56.2
Runs.............112 19.5

What do I need to get better numbers and not be so exhausted during the day if my settings last night were;
Initial pressure 10.0
Min pressure 8.0
Max pressure 18.0
And actual pressure ranged from 8.0 to 16.0 but was mainly at 14 for most of the night.
Advanced features of ILF1 and ILF2 were not activated at all.

FoolsGold
Posts: 5
Joined: Sat Oct 16, 2004 6:57 pm

Re: Repy to Foolsgold

Post by FoolsGold » Mon Oct 18, 2004 6:29 am

FoolsGold wrote: Apneas........ 36 6.3/hr
Apneas
w/Cardiac... 13 2.3
Hypopneas....37 6.5
Hypopneas
w/ FL ............9 1.6
AcousVibes....322 56.2
Runs.............112 19.5
And actual pressure ranged from 8.0 to 16.0 but was mainly at 14 for most of the night.
Advanced features of ILF1 and ILF2 were not activated at all.
Apneas 62 4.9
Ap w cc 18 1.4
hypop 61 4.8
Hy FL 26 2.0
Vibes 1052 82.6
Runs 275 21.6

Is this an improvement?
Since the pressure went up to the max should I have had it higher?
New max pressure was 17 and it spent alot of time there.