Quantcast

Bookmark and Share
General Discussion on any topic relating to CPAP and/or Sleep Apnea.
WillowtheHen
 
Posts: 3
Joined: Wed May 03, 2017 8:32 am
Gender: Female

titration study over - Using bipap in interim

Postby WillowtheHen on Fri May 19, 2017 12:46 pm

Hello. Just got diagnosed with OSA and finished my titration study - I need a pressure of 11. We have an unused bipap machine so I was wondering if there was any harm in using that in the meantime while I wait for my new machine. I don't know yet whether my doctor will prescribe a cpap or bipap. Is there any concern with using a bipap if I need a cpap? From what I have read it doesn't sound like it but I wanted to ask those who know better.

How do I adjust the pressure on a Philips respironics?

WillowtheHen
 
Posts: 3
Joined: Wed May 03, 2017 8:32 am
Gender: Female

Re: titration study over - Using bipap in interim

Postby WillowtheHen on Fri May 19, 2017 1:05 pm

Oooooh I found the secret menu!

These are the current settings:

Mode AutoB
Max Ipap 11
Min Epap 6
Max PS 4.5
Flex Type Bi-Flex
Bi-Flex 2
Ramp time :30
Ramp start 4.0
tubing type off
Tubing type 22
SYSTEM 0
Lock SYSTEM ONE Off
System ONE humification on
Humidifier 3
Auto on - on
Auto off - on
Mask alert - off
Mask fit check - off
Show AHI/Leak/PB on
Split Night off

How does that all look?

raisedfist
 
Posts: 321
Joined: Wed Jun 15, 2016 7:21 am
Gender: None specified

Re: titration study over - Using bipap in interim

Postby raisedfist on Fri May 19, 2017 1:37 pm

Just put your bi-level in CPAP mode and set the pressure to 11cmh2o and you're done. In bi-level mode you can also just set IPAP/EPAP to the same pressure of 11, but the former makes way more sense.

_________________
Mask Humidifier 
ResMed S9 VPAP ST-A with iVAPS
ResMed iVAPS mode: Target Va: 3.9 L/Min; PS Min: 4; PS Max: 20; EPAP: 5

xxyzx
 
Posts: 2833
Joined: Mon Apr 03, 2017 2:42 pm
Gender: None specified

Re: titration study over - Using bipap in interim

Postby xxyzx on Fri May 19, 2017 7:27 pm

WillowtheHen wrote:Hello. Just got diagnosed with OSA and finished my titration study - I need a pressure of 11. We have an unused bipap machine so I was wondering if there was any harm in using that in the meantime while I wait for my new machine. I don't know yet whether my doctor will prescribe a cpap or bipap. Is there any concern with using a bipap if I need a cpap? From what I have read it doesn't sound like it but I wanted to ask those who know better.

How do I adjust the pressure on a Philips respironics?

===========

if you had a bipap titration you should have two numbers
one number indicates you get a cpap

you can set the old bipap so both numbers are equal to make it a cpap

bibpap is just as good even better than a cpap
an auto bipap better still

get the clinic manual it will show you how to change things or set it up
IF I ever say anything incorrect somebody will post true facts to prove it. But when my posts are accurate they will always attack me personally. You can decide whether my post is correct or not by looking at which they did.

User avatar
kteague
 
Posts: 6836
Joined: Tue May 16, 2006 8:30 pm
Location: West and Midwest
Gender: Female

Re: titration study over - Using bipap in interim

Postby kteague on Sat May 20, 2017 1:43 am

I have never been prescribed or titrated on a bi-level but one "fell into my hands" so I tried it and was surprised at how much more natural my breathing felt. I was content with the continuous pressure, but chose to stay with the bi-level due to comfort with my creeping increase in pressure needs to 14. Most time a bi-level isn't prescribed unless there's some extinuating circumstances. Even if you don't need it, doesn't mean you can't use it. Disclaimer: If there's anything out of the ordinary about your condition, ask if there's any reason to not use the bi-level.

Holden4th
 
Posts: 355
Joined: Wed Feb 24, 2016 3:15 am
Location: Gold Coast Australia
Gender: Male

Re: titration study over - Using bipap in interim

Postby Holden4th on Sat May 20, 2017 2:28 am

While a few people respond better to a straight CPAP pressure setting, APAP or BiPAP can definitely enhance your therapy, as I found out. A few ideas for tweaking your machine.

Set the Max IPAP to 20. If you don't go that high (which you shouldn't) then it doesn't matter as the option is there. Personally I'd raise the min EPAP closer to that 11 you were prescribed (8 or 9 might be good) as it will give the machine less work to do when responding to events. Some would rightly recommend that an EPAP 11 minimum might be a good way to go but if you set it a bit lower you can tweak things from there.

Pressure support will be the interesting setting. I've been running mine with a range of 1 to 5 but reset the PS min to 2.5 which brought about an immediate improvement in my hypopnea and RERA scores. I like the more comfortable way that BiPAP works for me so my APAP machine is now my backup.

Sleep titration tests tend to come up with one treatment number (in your case 11) and unfortunately many DMEs see this as a way to prescribe a straight pressure machine. If this happens to you then either ask for an auto machine or even better, save your money and keep using the BiPAP as it can be set to CPAP, APAP or BiPAP mode.

Finally. I am using Biflex but don't have the faintest idea of what it is doing. If you turn Biflex off then you need to enter a Rise Time setting.


Return to CPAP and Sleep Apnea (CLICK HERE TO READ POSTS)

Who is online

Users browsing this forum: poppi2, squid13 and 33 guests