Quick question on Airfit F10
Quick question on Airfit F10
Just wanted to ask if the large size cushions are wider at the base than the medium ones or are they just longer?
_________________
Machine: DreamStation Auto CPAP Machine |
Mask: AirFit F30 Complete Mask + AirMini Mask Setup Pack Bundle |
Humidifier: DreamStation Heated Humidifier |
-
- Posts: 1116
- Joined: Wed Feb 05, 2014 11:10 am
- Location: Rochester, MN
Re: Quick question on Airfit F10
I'm not really sure... but I think they are longer rather than wider. I use the medium AirFit F10, and prior to the F10 when I first started this journey, I was using Quattro Air, which uses the same cushion. While on the Quattro, I switched to small from medium, thinking it might work better... and woke up in the morning with the bottom of the mask, including the frame, in my mouth! I switched back to medium and it worked for me after that. I only switched to the F10 when it came out because it doesn't have the forehead strap, but could see that otherwise it fits the same. Could be that the width changes proportionally to the length as well.
Perhaps your DME could help you by measuring the height and width of each so you can compare with yours.
Perhaps your DME could help you by measuring the height and width of each so you can compare with yours.
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Mask: AirFit™ F10 Full Face Mask with Headgear |
Additional Comments: Sleepyhead |
Now using AirFit F10 mask; Quattro Air is backup mask. RemZzzz mask liners with both.
Re: Quick question on Airfit F10
The medium cushion width is 4 5/8". The large is 4 3/4".
- Sir NoddinOff
- Posts: 4190
- Joined: Mon May 14, 2012 5:30 pm
- Location: California
Re: Quick question on Airfit F10
I've written before about how IMO the F10 cushions are too narrow at the bottom. A lot of older people like me have creases in the corners of their mouth and this can be create leak problems. BTW, my mouth is not very wide, it would definitely be considered pretty normal size by anybody's standards, even on the smallish side. I can't see why ResMed can't make them a bit wider... of course they'd have to retool their plastic and silicone injection molds, so that's probably not going to happen.
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2. |
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.