Resmed Airfit F10 mask very "light"
- Oltremare
- Posts: 187
- Joined: Tue Dec 29, 2015 7:01 pm
- Location: On the other side of the sea - Italy
Resmed Airfit F10 mask very "light"
I bought on the Internet a Resmed Airfit F10 mask at a price perhaps too low!
Now I'm wondering if it is original or whether it is a rip off!
The packaging is intact, sealed and seems likely.
My other resmed masks are made in Singapore but the back the envelope is written:
"Made in Australia
Soft sleeves made in China. "
Maybe it's all ok but what do you think?
Thank you very much.
Now I'm wondering if it is original or whether it is a rip off!
The packaging is intact, sealed and seems likely.
My other resmed masks are made in Singapore but the back the envelope is written:
"Made in Australia
Soft sleeves made in China. "
Maybe it's all ok but what do you think?
Thank you very much.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Additional Comments: Quattro FX FF mask > CMS50D+ pulse oximeter > Climate line > Settings: auto-CPAP pressure Min 11.00 Max 18.0 EPR 3 |
I hope you will forgive my language errors. To write in English I use a translator online. Thank you
Re: Resmed Airfit F10 mask very "light"
resmed IS an australian company, you know...Oltremare wrote:"Made in Australia
Soft sleeves made in China. "
Maybe it's all ok but what do you think?
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- Oltremare
- Posts: 187
- Joined: Tue Dec 29, 2015 7:01 pm
- Location: On the other side of the sea - Italy
Re: Resmed Airfit F10 mask very "light"
Yes, but I didn't know they had a production in China.resmed IS an australian company, you know...
Perhaps my fears are useless and I just had good luck for a good buy ...
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Additional Comments: Quattro FX FF mask > CMS50D+ pulse oximeter > Climate line > Settings: auto-CPAP pressure Min 11.00 Max 18.0 EPR 3 |
I hope you will forgive my language errors. To write in English I use a translator online. Thank you
Re: Resmed Airfit F10 mask very "light"
typically, chinese rip-off clones fake the country of origin too, like some fake nippers that were ordered from china wherein the box was plastered "MADE IN USA" all over the front.Oltremare wrote:Yes, but I didn't know they had a production in China.resmed IS an australian company, you know...
Perhaps my fears are useless and I just had good luck for a good buy ...
I'm not saying that there aren't counterfeit cpap masks out there, (because, how would I know for sure?) but, I will say that I've never heard of such a thing.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- Oltremare
- Posts: 187
- Joined: Tue Dec 29, 2015 7:01 pm
- Location: On the other side of the sea - Italy
Re: Resmed Airfit F10 mask very "light"
I also think like you palerider.
I was doubt why I bought on ebay at a very low almost unbelievable price !!!
OK, thanks for your opinion.
Here it's time to go to bed, it's almost midnight, and I'm going to try the new mask.
Tomorrow will tell how I slept.
Good night to all.
I was doubt why I bought on ebay at a very low almost unbelievable price !!!
OK, thanks for your opinion.
Here it's time to go to bed, it's almost midnight, and I'm going to try the new mask.
Tomorrow will tell how I slept.
Good night to all.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Additional Comments: Quattro FX FF mask > CMS50D+ pulse oximeter > Climate line > Settings: auto-CPAP pressure Min 11.00 Max 18.0 EPR 3 |
I hope you will forgive my language errors. To write in English I use a translator online. Thank you
Re: Resmed Airfit F10 mask very "light"
I have gotten some very good whole mask deals there. So sleep well.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead Software |
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
- Oltremare
- Posts: 187
- Joined: Tue Dec 29, 2015 7:01 pm
- Location: On the other side of the sea - Italy
Re: Resmed Airfit F10 mask very "light"
My first night with AIRFIT F10 was not good. Many revivals, caused by air leakage from the mask near the eyes.
Droplets of condensation on the breather holes and generated annoying gurgling.
But I do not give up, the mask I like and try again.
Droplets of condensation on the breather holes and generated annoying gurgling.
But I do not give up, the mask I like and try again.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Additional Comments: Quattro FX FF mask > CMS50D+ pulse oximeter > Climate line > Settings: auto-CPAP pressure Min 11.00 Max 18.0 EPR 3 |
I hope you will forgive my language errors. To write in English I use a translator online. Thank you
Re: Resmed Airfit F10 mask very "light"
Even with a heated hose we can sometimes get condensation at the mask level from the added moisture in our own exhaled breath if the conditions are just right such as a cool room and warm breath. The Auto setting works fine for some people but with the Airsense 10 and Climateline hose you can place it on manual and set the tube temperature and humidity level individually. So it may take some adjusting of the tube temperature.
Also be sure your tube is higher the machine is lower, that way if the moisture is in the tube it will drain back to the humidifier.
My husband used the Padacheek liner to help with the mask movement and leaks with his F10. Keep trying you will find your right combination.
Also be sure your tube is higher the machine is lower, that way if the moisture is in the tube it will drain back to the humidifier.
My husband used the Padacheek liner to help with the mask movement and leaks with his F10. Keep trying you will find your right combination.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead Software |
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
- Oltremare
- Posts: 187
- Joined: Tue Dec 29, 2015 7:01 pm
- Location: On the other side of the sea - Italy
Re: Resmed Airfit F10 mask very "light"
OkyDoky you're right!
Yesterday I had the climate of "manual" to combat dry mouth.
Tonight I'll try "automatic climate" so I'll see how it goes.
I also want to try it on Padacheek or the like but in my country there are no shops to CPAP. I can buy, only online and not easy.
thanks for good advices.
Yesterday I had the climate of "manual" to combat dry mouth.
Tonight I'll try "automatic climate" so I'll see how it goes.
I also want to try it on Padacheek or the like but in my country there are no shops to CPAP. I can buy, only online and not easy.
thanks for good advices.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Additional Comments: Quattro FX FF mask > CMS50D+ pulse oximeter > Climate line > Settings: auto-CPAP pressure Min 11.00 Max 18.0 EPR 3 |
I hope you will forgive my language errors. To write in English I use a translator online. Thank you
Re: Resmed Airfit F10 mask very "light"
You can try cutting your own out of old tee shirt material. I did see where http://padacheek.com/ now has increased shipping charges Canada shipping is a flat $10.00 USD and any other country is now $15.00 USD
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead Software |
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
- Okie bipap
- Posts: 3552
- Joined: Thu Oct 15, 2015 4:14 pm
- Location: Central Oklahoma
Re: Resmed Airfit F10 mask very "light"
If you want to make your own mask liner, here is a link to a pattern that is quite similar to a commercial brand. I have used it in the past to make my own mask liners out of an old tee shirt. The pattern is a small size. If you need a larger liner, you can enlarge it as necessary. http://montfordhouse.com/cpap/diy-cotton-mask-liner.pdf
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Evora Full Face Mask - Fitpack |
Additional Comments: IPAP 20-25, ps 4, OSCAR software |
Growing old is mandatory, but growing up is optional.
- Oltremare
- Posts: 187
- Joined: Tue Dec 29, 2015 7:01 pm
- Location: On the other side of the sea - Italy
Re: Resmed Airfit F10 mask very "light"
Thanks Okie BiPAP, I would try to make it.
I need some advice for how to use it. It serves to lower the air leaks? How I stick to the mask, just leaning against on it?
I hope you will forgive my ignorance, I am newbie ...
I need some advice for how to use it. It serves to lower the air leaks? How I stick to the mask, just leaning against on it?
I hope you will forgive my ignorance, I am newbie ...
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Additional Comments: Quattro FX FF mask > CMS50D+ pulse oximeter > Climate line > Settings: auto-CPAP pressure Min 11.00 Max 18.0 EPR 3 |
I hope you will forgive my language errors. To write in English I use a translator online. Thank you
Re: Resmed Airfit F10 mask very "light"
Oltremare wrote:I need some advice for how to use it. It serves to lower the air leaks? For some people during the night if the skin gets oily it may increase leaks and the liner can help. Some people report they didn't help. You just have to try and see.
How I stick to the mask, just leaning against on it? Yes and when you have the mask tightened pull slightly on the edge to make smooth.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead Software |
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
Re: Resmed Airfit F10 mask very "light"
Both of my F10's, one supplied to me by my DME source (SleepMed) & the other from ebay had notations of the little sleeve being made in China and the mask being made in Australia. If your mask was actually a Chinese counterfeit knock-off, I imagine that you'd probably be suffering from some hideous chemical reaction by now. My most recent mask, a Mirage Quattro, also says made in Australia. Singapore is another place that some are made, I have a Swift FX from Singapore. Good luck with your new mask.
_________________
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: Resmed Airfit F10 mask very "light"
when I used liners, they were just plain cloth, I would either lay it on the mask, then dip my face into the mask, or, more likely, I'd lay on my back in bed, put the liner on my face, and then lower the mask to my face, and then snap on the headgear while holding the mask in place. it took a little practice, but was easy after I got the hang of it.Oltremare wrote: How I stick to the mask, just leaning against on it?
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.