Cpap mask sealer
Cpap mask sealer
I have the Res Med XS face mask. It goes just around the nose and mouth. The rubber around the mask had come apart from the plastic part of the mask. It is just a small part that has come unglued so can I just get a sealant to fix it? And if so what would you recommend?
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Mask: AirFit™ F10 For Her Full Face Mask with Headgear |
- zoocrewphoto
- Posts: 3732
- Joined: Mon Apr 30, 2012 10:34 pm
- Location: Seatac, WA
Re: Cpap mask sealer
The cushion is meant to be removable so that you can clean it and replace it as needed. Do NOT glue it in. It should fit back into the groove and stay just fine.
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Resmed S9 autoset pressure range 11-17 |
Who would have thought it would be this challenging to sleep and breathe at the same time?
Re: Cpap mask sealer
Replace it (the cushion) if it's no longer useable... Cpap.com's individual mask pages have a re-direct to 'Replacement Parts' which should help, and if they no longer carry it, I'm sure lots of other DME's would.
_________________
Mask: Ultra Mirage™ Full Face CPAP Mask with Headgear |
Humidifier: IntelliPAP Integrated Heated Humidifier |
-
- Posts: 320
- Joined: Fri Aug 21, 2015 8:38 am
- Location: North Carolina
Re: Cpap mask sealer
Use the information above. DO NOT glue it!!
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear |
- Sir NoddinOff
- Posts: 4190
- Joined: Mon May 14, 2012 5:30 pm
- Location: California
Re: Cpap mask sealer
A staple gun and some window caulking. Kidding. The OP hasn't come back and there might be some question about which mask they actually have.
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2. |
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.