Anyone successfully using a Oximeter with the latest SH software for Mac 10.10.4? If so what make and model...and any special operating instructions?
Thank You,
Which Oximeter to buy with Mac 10.10.4 and SleeyHead 9.8.1
Which Oximeter to buy with Mac 10.10.4 and SleeyHead 9.8.1
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ F10 Full Face Mask with Headgear |
ResMed AirSense S10 Autoset (Ins. Pur. 3/16/2016)
AutoCPAP 10-15 EPR 1.0 (Latest Sleep Study 3-7-16)
Started CPAP March 1995 with a pressure of 11.0
AutoCPAP 10-15 EPR 1.0 (Latest Sleep Study 3-7-16)
Started CPAP March 1995 with a pressure of 11.0
Re: Which Oximeter to buy with Mac 10.10.4 and SleeyHead 9.8.1
Just curious; why would you think you need an oximeter?
pax
Roger
pax
Roger
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: My humidifier is the same listed but without the climate control. My software is version 3.11.009 |
Re: Which Oximeter to buy with Mac 10.10.4 and SleeyHead 9.8.1
I use both the 50f and 50iw. In my opinion, they are easier to use with SH than the 50d+ but cost a little more. The difference between the f and i are; The i model will record up to 15 sessions and will provide a Perfusion Index value. The f model will only record 1 session and doesn't have a PI value. The definition of a session is a single start and stop of a record option. The "w" is for bluetooth and costs more. This feature is worthless with SH. You use the bluetooth option in real-time data monitoring with the device's supplied software.
I hope this helps.
I hope this helps.
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: CMS-50F & 50IW - SleepyHead 1.0.0-Beta |
Re: Which Oximeter to buy with Mac 10.10.4 and SleeyHead 9.8.1
Thanks for the information.SGearhart wrote:I use both the 50f and 50iw. In my opinion, they are easier to use with SH than the 50d+ but cost a little more. The difference between the f and i are; The i model will record up to 15 sessions and will provide a Perfusion Index value. The f model will only record 1 session and doesn't have a PI value. The definition of a session is a single start and stop of a record option. The "w" is for bluetooth and costs more. This feature is worthless with SH. You use the bluetooth option in real-time data monitoring with the device's supplied software.
I hope this helps.
Im really interested in making sure the device (50f or 50iw) will work with my Mac 10.10.4 and SH 9.8.1.........Are you setup using a Mac computer with 10.10.4, if yes what software are you using (if any) other than SH are there special drivers needed?
Thank You,
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ F10 Full Face Mask with Headgear |
ResMed AirSense S10 Autoset (Ins. Pur. 3/16/2016)
AutoCPAP 10-15 EPR 1.0 (Latest Sleep Study 3-7-16)
Started CPAP March 1995 with a pressure of 11.0
AutoCPAP 10-15 EPR 1.0 (Latest Sleep Study 3-7-16)
Started CPAP March 1995 with a pressure of 11.0
Re: Which Oximeter to buy with Mac 10.10.4 and SleeyHead 9.8.1
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: Which Oximeter to buy with Mac 10.10.4 and SleeyHead 9.8.1
My platform is Windows. As far as I know, The oximeter software is only written for the Microsoft platform. I believe that a forum member was able to use it on an iOS platform using Parallels. . . Don't quote me on this.fdw wrote:Im really interested in making sure the device (50f or 50iw) will work with my Mac 10.10.4 and SH 9.8.1.........Are you setup using a Mac computer with 10.10.4, if yes what software are you using (if any) other than SH are there special drivers needed?
Thank You,
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: CMS-50F & 50IW - SleepyHead 1.0.0-Beta |
Re: Which Oximeter to buy with Mac 10.10.4 and SleeyHead 9.8.1
you are correct. the provided software is windows only, but can run on an emulator on other platforms.SGearhart wrote:As far as I know, The oximeter software is only written for the Microsoft platform. I believe that a forum member was able to use it on an iOS platform using Parallels. . . Don't quote me on this.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.