Looking for input

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
RestlessRN
Posts: 4
Joined: Tue Jul 28, 2015 2:50 am

Looking for input

Post by RestlessRN » Sat Aug 01, 2015 12:10 am

So I have learned that the machine I will be getting to treat my OSA is an AirSense 10 Autoset. Can those who have/had this machine give me your thoughts/opinions on it? Any things I need to watch for? Any suggestions about things that improve using it? Also, my Pulmonologist has told me that she doesn't want me using a full face mask because she thinks it will make my apnea worse so that leaves me with nasal masks and pillows. I'm not interested in the cannulas because I know I won't tolerate them all night every night. Any suggestions on a nasal mask/pillow for someone who is a side sleeper and tosses and turns all night? TIA. (I do understand that just because it works for you doesn't mean it will work for me. Again, just looking for suggestions and input.)

User avatar
zoocrewphoto
Posts: 3732
Joined: Mon Apr 30, 2012 10:34 pm
Location: Seatac, WA

Re: Looking for input

Post by zoocrewphoto » Sat Aug 01, 2015 12:23 am

This is a fairly new machine. Some people here have it already and like it. Most of us do not. I have the S9 autoset (one machine earlier), and I am happy.

No idea how the mask type would affect your apnea events. It's about comfort. Whatever feels and works the best for you. Don't rule it out because of odd advice. I have severe sleep apnea with an untreated ahi of 79+, and my treated ahi is usually less than 1, rarely up to 2; and i use a full face mask.

Take a look at what they have and ask to try the ones that look more comfortable to you.

_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Resmed S9 autoset pressure range 11-17
Who would have thought it would be this challenging to sleep and breathe at the same time?

RestlessRN
Posts: 4
Joined: Tue Jul 28, 2015 2:50 am

Re: Looking for input

Post by RestlessRN » Sat Aug 01, 2015 12:50 am

zoocrewphoto wrote: No idea how the mask type would affect your apnea events.
She said it has to do with my specific anatomy and a few other issues. I have nothing against trying a mask but I DO trust her. I also wear glasses and like to read before bed, which I see nasal masks/pillows suggested for. The RTs I work with also suggested a nasal mask/pillow but were only able to suggest a couple they use on our inpatient population because they don't have a lot of experience with any others.

User avatar
zoocrewphoto
Posts: 3732
Joined: Mon Apr 30, 2012 10:34 pm
Location: Seatac, WA

Re: Looking for input

Post by zoocrewphoto » Sat Aug 01, 2015 1:04 am

RestlessRN wrote:
zoocrewphoto wrote: No idea how the mask type would affect your apnea events.
She said it has to do with my specific anatomy and a few other issues. I have nothing against trying a mask but I DO trust her. I also wear glasses and like to read before bed, which I see nasal masks/pillows suggested for. The RTs I work with also suggested a nasal mask/pillow but were only able to suggest a couple they use on our inpatient population because they don't have a lot of experience with any others.

We have found that a lot of doctors, nurses, and even the people who sell the machines, really have no experience in using them. They often believe incorrect information. They may mean well, but they will often discourage a mask saying it work work for side sleepers, or it won't work at high pressure, etc. Yet, people here use them all the time with no problem. There are many full face masks with nothing blocking the eyes. There are also hybrid masks that have a cushion around the mouth and pillows for the nose.

You may really prefer a nasal mask. I'm just suggesting that you don't rule out a full face mask if you need that option. If you are a mouth breather, you will need a full face mask or oral mask. Many people don't need them, but many do.

_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Resmed S9 autoset pressure range 11-17
Who would have thought it would be this challenging to sleep and breathe at the same time?

User avatar
Sheriff Buford
Posts: 4080
Joined: Mon Aug 09, 2010 8:01 am
Location: Kingwood, Texas

Re: Looking for input

Post by Sheriff Buford » Sat Aug 01, 2015 1:55 am

If that lady told you that a full face mask will hurt your apnea, I can guarantee you she has no clue what she is talking about. Educate yourself on this site, and you'll know I'm speaking the truth. Note that a full face mask allows you to mouth-breath without losing therapy. Pillows are less intrusive, but you must keep your mouth closed all night, or you'll lose therapy. A mask should be comfortable and not leak air. Finding the right mask for you is a journey in itself. You have a top of the line machine. If I was to try pillows, I'd checkout the Resmed P10.

Best wishes, Sheriff

User avatar
Pugsy
Posts: 63941
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Looking for input

Post by Pugsy » Sat Aug 01, 2015 6:42 am

I would also suggest looking at the ResMed AirFit P10 nasal pillow mask...it's the latest nasal pillow mask from ResMed. Pretty minimal and I use it now.
You might also look at the ResMed Swift FX nasal pillow or if you think a nasal cushion might be something you want to try I would suggest the ResMed Swift FX Nano cushion.
You can look at them if you go to the mask section at cpap.com.
The P10 and Swift FX nasal pillows are in the nasal pillow section and the Nano is in the Nasal section.

If you can normally breathe through your nose okay then these minimal masks are worth a try if they are what interests you.
If you have chronic nasal congestion issues that can't be cleared up and you simply can't breathe comfortable through just your nose then they may not work well.

Not all mouth breathing means that you just HAVE to use a full face mask if you don't want to (for whatever reason). It all depends on how much mouth breathing is going on and how prolonged.
Cross that bridge if and/or when you need to. The AirSense 10 AutoSet is a full data machine and it provides (when using software) a way to evaluate the leak line and if there is any significant mouth breathing going on it will show up as big leak on the software reports.
Finally if the mouth leaking is an issue...there are ways to reduce it and still use a nasal only mask if that is what you want to do.

The AirSense 10 AutoSet is a great machine. Can't believe it has nearly been a year now that it has been released.
You might want to save this in case they don't include the manual.
https://sleep.tnet.com/home/files/resme ... -guide.pdf

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

cyclist56
Posts: 48
Joined: Sun Jul 05, 2015 10:05 am

Re: Looking for input

Post by cyclist56 » Sat Aug 01, 2015 8:28 am

Pugsy wrote:I would also suggest looking at the ResMed AirFit P10 nasal pillow mask...it's the latest nasal pillow mask from ResMed. Pretty minimal and I use it now.
You might also look at the ResMed Swift FX nasal pillow or if you think a nasal cushion might be something you want to try I would suggest the ResMed Swift FX Nano cushion.
You can look at them if you go to the mask section at cpap.com.
The P10 and Swift FX nasal pillows are in the nasal pillow section and the Nano is in the Nasal section.

If you can normally breathe through your nose okay then these minimal masks are worth a try if they are what interests you.
If you have chronic nasal congestion issues that can't be cleared up and you simply can't breathe comfortable through just your nose then they may not work well.

Not all mouth breathing means that you just HAVE to use a full face mask if you don't want to (for whatever reason). It all depends on how much mouth breathing is going on and how prolonged.
Cross that bridge if and/or when you need to. The AirSense 10 AutoSet is a full data machine and it provides (when using software) a way to evaluate the leak line and if there is any significant mouth breathing going on it will show up as big leak on the software reports.
Finally if the mouth leaking is an issue...there are ways to reduce it and still use a nasal only mask if that is what you want to do.

The AirSense 10 AutoSet is a great machine. Can't believe it has nearly been a year now that it has been released.
You might want to save this in case they don't include the manual.
https://sleep.tnet.com/home/files/resme ... -guide.pdf
I also have the Resmed Airfit10. It works well, but I have to use the chin strap to eliminate mouth breathing. When I do, I score 20/20 on leakage. I also found that the large pillows that I was fitted with did not work that well. Once I switched to medium, I had fewer issues with the mask leaking and having to finagle with it. So my advice would be to try the Airfit10, and to try a different size if there is a lot of leaking.