I am bald and use a Resmed Quattro FX full nose and mouth mask and headgear. I also use Resmed mask liners to eliminate the infamous "mask farting". Ever since I started using this gear, I've struggled with the head gear causing facial impressions on my face and scalp that take hours to completely fade away the next day. I also get red marks on the bridge of my nose. This causes embarrassing discussions at morning meetings for me. So over the last year or so I've developed a technique of using a thin Under Armour skull cap combined with sterilized non absorbent wound pads from CVS Pharmacy to act as a buffer from the head gear. It's a total pain in the ass each night, and looks absolutely ridiculous on me but it does help, though nothing completely prevents the morning skin impressions. I've tried different tightness settings with the Velcro on the headgear, but it has to be tight enough to cause the impressions or I get leakage from the mask at night.
So based on that, has anyone out there experienced this problem and if so, how did you deal with it? I hope there's other mask products out there that have better headgear to prevent this problem from occurring.
All input is welcome.
Thanks!
Facial and scalp impressions from headgear
Re: Facial and scalp impressions from headgear
Check out http://www.padacheek.com/. I use their strap covers and they greatly reduce my face marks. The ones that are left fade quickly. The owner is a member here and works to find solutions for our problems.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead Software |
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
Re: Facial and scalp impressions from headgear
Obviously you have the mask too tight. If you feel you must have it that tight, you need to try mask and/or strap liners from padacheek.com.
Most masks need air to float on your face..too tight=no air=face marks.
Most masks need air to float on your face..too tight=no air=face marks.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
- Stormynights
- Posts: 2273
- Joined: Wed Mar 10, 2010 7:01 pm
- Location: Oklahoma
Re: Facial and scalp impressions from headgear
It took me about 3 years to find the right mask for me. Once you get the right mask it is all down hill.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Pressure EPAP 5.8 IPAP 9.4-21.8 PS 3.6/16 S9 Vpap Adapt ASV |
Re: Facial and scalp impressions from headgear
I also use the QFX and my pressures go up to 25 each night. Because of this, I have to wear my mask very snug. This stretches my headgear out over my head. I had to come up with a different set up. I tried the blue mesh soft cap by Respironics https://www.cpap.com/productpage/softca ... onics.html. This has been a game-changer for me. I can snug up my mask without over-tightening, knowing that my mask will be very stable on my face withstanding my high pressure swings. I also use headgear pads. In the morning, I have "dents" which go away within the first hour of my day. No more nose sores or strap marks!
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Additional Comments: Supplemental oxygen at 2.5 lpm |
AutoSV 960 with heated hose. Settings: EPAP Min-12, EPAP Max-17, PS Min-5.5, PS Max-13, Max Pressure-25, Rate-Auto, Rise Time 1. Use Sleepyhead and Encore Pro.
Re: Facial and scalp impressions from headgear
Interesting, never seen that before.
Current Settings PS 4.0 over 10.6-18.0 (cmH2O) - Resmed S9 VPAP Auto w/h5i Humidifier - Quattro Air FFM
TNET Sleep Resource Pages - CPAP Machine Database
Put your equip in your Signature - SleepyHead v1.0.0-beta-1
Kevin... alias Krelvin
TNET Sleep Resource Pages - CPAP Machine Database
Put your equip in your Signature - SleepyHead v1.0.0-beta-1
Kevin... alias Krelvin
Re: Facial and scalp impressions from headgear
I tried the soft cap out of desperation. I liked it so much that I asked my DME to start sending me that one instead of the headgear that is packaged with the mask. No problem! I have 3; one for each mask I use (QFX, F10 and FitLife). The DME just replaces the accompanying headgear with the soft cap; no additional cost.
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Additional Comments: Supplemental oxygen at 2.5 lpm |
AutoSV 960 with heated hose. Settings: EPAP Min-12, EPAP Max-17, PS Min-5.5, PS Max-13, Max Pressure-25, Rate-Auto, Rise Time 1. Use Sleepyhead and Encore Pro.
- Sheriff Buford
- Posts: 4082
- Joined: Mon Aug 09, 2010 8:01 am
- Location: Kingwood, Texas
Re: Facial and scalp impressions from headgear
So you use the mask as the headgear?M'ohms wrote:I tried the soft cap out of desperation. I liked it so much that I asked my DME to start sending me that one instead of the headgear that is packaged with the mask. No problem! I have 3; one for each mask I use (QFX, F10 and FitLife). The DME just replaces the accompanying headgear with the soft cap; no additional cost.
_________________
Machine: AirSense 11 Autoset |
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |