Search found 58 matches

by RNeil
Tue Jun 11, 2024 3:51 pm
Forum: CPAP and Sleep Apnea Message Board
Topic: Are there any sources online to download CPAP firmware?
Replies: 11
Views: 3758

Re: Are there any sources online to download CPAP firmware?

The way a microprocessor updates software is a little bit like a neurosurgeon who operates on his own brain. It is much better for a glitch to abort the process than to make the machine, including the bootloader completely inoperable.
by RNeil
Thu May 23, 2024 8:41 am
Forum: CPAP and Sleep Apnea Message Board
Topic: Adventures with boiling
Replies: 3
Views: 1105

Re: Adventures with boiling

I had a similar experience with a F&P Brevida pillow. I didn't try boiling. I just replaced it. I think the problem was a loss of flexibility caused by sublimation of volatile components in the rubber. Boiling could only make it worse.
by RNeil
Tue Apr 09, 2024 10:42 am
Forum: CPAP and Sleep Apnea Message Board
Topic: 12 volt problems
Replies: 3
Views: 963

Re: 12 volt problems

Are you saying you are trying to power the CPAP machine with USB? That can't supply enough power. The machine would reset when the motor starts. If you are in an rv, you should be able to get 12 volts.
by RNeil
Wed Feb 28, 2024 12:35 pm
Forum: CPAP and Sleep Apnea Message Board
Topic: Clearing nasal passage - Tips please.
Replies: 9
Views: 2950

Re: Clearing nasal passage - Tips please.

People hate me for this... but I can recommend Afrin. I hate that you said that. I too found that Afrin was very effective. I would use more when it wore off. But it took less and less time for it to wear off. My congestion and runny nose got worse. It was the Afrin that was causing the problem. I ...
by RNeil
Fri Jan 19, 2024 8:34 am
Forum: CPAP and Sleep Apnea Message Board
Topic: Ambien withdrawal
Replies: 4
Views: 5179

Re: Ambien withdrawal

I tapered off Ambien successfully. I had been using 10 mg. Then I went to half the 10 mg pill, then every other night. But I was not on it as long as you.

Cognitive behavior therapy also helped.
by RNeil
Wed Nov 29, 2023 3:13 pm
Forum: CPAP and Sleep Apnea Message Board
Topic: Morf Nasal Mask - custom fit mask
Replies: 21
Views: 19734

Re: Morf Nasal Mask - custom fit mask

The Morf mask requires molding to your face. The Morf mask is very interesting. It can mold for an exact fit with your face. Other masks make you choose between 3 or fewer sizes to get a compromise fit. They depend on flexibility to make the fit acceptable. The Morf can fit exactly. But it is not fl...
by RNeil
Tue Nov 14, 2023 9:40 pm
Forum: CPAP and Sleep Apnea Message Board
Topic: Morf Nasal Mask - custom fit mask
Replies: 21
Views: 19734

Re: Morf Nasal Mask - custom fit mask

What is this gel pad you are referring to?

I am having a better time. I have used it two nights, but I want to get more experience before I report.
by RNeil
Sat Sep 23, 2023 4:13 pm
Forum: CPAP and Sleep Apnea Message Board
Topic: How often do you replace your humidifier chamber?
Replies: 17
Views: 6335

Re: How often do you replace your humidifier chamber?

The chamber life depends on how often you drop it, how often you use Soclean and how often you put the non-dishwasher safe version in the dishwasher. I replace mine almost every time I drop it.
by RNeil
Mon Sep 04, 2023 8:57 am
Forum: CPAP and Sleep Apnea Message Board
Topic: How often should I clean hose without using humidifier
Replies: 9
Views: 1581

Re: How often should I clean hose without using humidifier

My hose is about 6 years old, but I have never cleaned it. It is like new. If I used William Shatner approved methods of cleaning, it might not have lasted as long.
by RNeil
Mon Jun 26, 2023 7:30 pm
Forum: CPAP and Sleep Apnea Message Board
Topic: Swallowing Saliva with CPAP Plugs My Ears
Replies: 7
Views: 1567

Re: Swallowing Saliva with CPAP Plugs My Ears

When you yawn or swallow, you are equalizing the pressure between your throat and your inner ear. CPAP makes the throat pressure higher so that the inner ear pressure will be higher than the outer pressure. The difference is usually not a problem.
by RNeil
Wed May 03, 2023 4:18 pm
Forum: CPAP and Sleep Apnea Message Board
Topic: Water chamber
Replies: 1
Views: 1651

Re: Water chamber

The humidifier must be working because that's where the water in the tube is coming from. You can prevent condensation in the tube by using a hose cover, or a heated tube, or turning down the humidity (water heater).
by RNeil
Wed May 03, 2023 4:11 pm
Forum: CPAP and Sleep Apnea Message Board
Topic: air leaking into closed mouth
Replies: 6
Views: 1891

Re: air leaking into closed mouth

If you have a nasal mask and you open your mouth, your air will be short circuited. Air will flow in your nose and out your mouth. It will flow fast enough to dry out your mouth even if the humidity it on the maximum. Your machine will not prevent or indicate apneas when this happens. There are seve...
by RNeil
Fri Mar 31, 2023 8:02 am
Forum: CPAP and Sleep Apnea Message Board
Topic: Suffocating on CPAP
Replies: 8
Views: 754

Re: Suffocating on CPAP

Your feeling of suffocating might be because your pressure is too low. Some people feel this way with a setting of 4 cm H2O. Or your feeling might be from a vent that is not working right. The mask has a vent that is like a controlled leak. This is the only way that exhaled air gets out. Our urge to...
by RNeil
Mon Jan 09, 2023 7:55 am
Forum: CPAP and Sleep Apnea Message Board
Topic: Room humidifier needed?
Replies: 3
Views: 457

Re: Room humidifier needed?

You did not say what kind of mask you are using. I use a nasal pillow. I have had bad dry mouth when I open my mouth when sleeping. The air goes in your nose and out your mouth. You have a high flow that makes the humidifier less effective. Check the leakage in OSCAR.
by RNeil
Thu Dec 22, 2022 2:55 pm
Forum: CPAP and Sleep Apnea Message Board
Topic: Silicone alternatives? and mask woes
Replies: 7
Views: 706

Re: Silicone alternatives? and mask woes

SleepWeaver makes cloth masks. They are very comfortable. They are also sensitive to how they are used and may leak. Buy from a vendor that lets you return it if not satisfied.