Resmed Aircurve VAuto

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
sthnreb1

Resmed Aircurve VAuto

Post by sthnreb1 » Thu Jan 29, 2015 4:43 pm

Does anyone know where I could get a provider manual for the Resmed Aircurve VAuto? Or if it can be downloaded somewhere.

User avatar
Pugsy
Posts: 63872
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Resmed Aircurve VAuto

Post by Pugsy » Thu Jan 29, 2015 4:45 pm

Only place I know of is here.
http://www.apneaboard.com/adjust-cpap-p ... tup-manual
You will need to request it be sent to you via your personal email. Instructions for doing this are near the bottom of the page.
Make sure you request the correct model with using correct terms.
ResMed AirCurve 10 VAuto, S & ST (combined manual)

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

User avatar
sthnreb
Posts: 614
Joined: Wed Feb 09, 2005 9:28 am
Location: Metro Atlanta

Re: Resmed Aircurve VAuto

Post by sthnreb » Thu Jan 29, 2015 4:51 pm

It looked like a good site but I couldn't find a working link for the manual.

_________________
MachineMask
Additional Comments: Resmed AirCurve 10 VAuto BiLevel with HumidAir
Bi-Pap for 17 years now. Rx 12/8 and using a Resmed AirCurve 10 SAuto Bipap Auto.

User avatar
sthnreb
Posts: 614
Joined: Wed Feb 09, 2005 9:28 am
Location: Metro Atlanta

Re: Resmed Aircurve VAuto

Post by sthnreb » Thu Jan 29, 2015 4:56 pm

By the way, this is the newest Resmed machine and is a bipap. I wasn't signed in when I first posted, sorry. Just got it today from a DME, Lincare and was supposed to get a provider manual too. He did show me how to enter provider mode but the manual would also be nice if I can find it.

_________________
MachineMask
Additional Comments: Resmed AirCurve 10 VAuto BiLevel with HumidAir
Bi-Pap for 17 years now. Rx 12/8 and using a Resmed AirCurve 10 SAuto Bipap Auto.

User avatar
Pugsy
Posts: 63872
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Resmed Aircurve VAuto

Post by Pugsy » Thu Jan 29, 2015 4:56 pm

You won't find a working download link for that clinical manual anywhere.
ResMed won't allow it to be linked to like that. You will need to request the manual via your own email...that's the only way to get it.
I have the AirSense 10 Autoset manual but not the AirCurve machines or I would send it to you.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

User avatar
sthnreb
Posts: 614
Joined: Wed Feb 09, 2005 9:28 am
Location: Metro Atlanta

Re: Resmed Aircurve VAuto

Post by sthnreb » Thu Jan 29, 2015 5:02 pm

I went back and did find where to request it, Thanks for the information. Hoping to get it sent soon.

_________________
MachineMask
Additional Comments: Resmed AirCurve 10 VAuto BiLevel with HumidAir
Bi-Pap for 17 years now. Rx 12/8 and using a Resmed AirCurve 10 SAuto Bipap Auto.

Greg Riddle
Posts: 409
Joined: Wed Aug 13, 2014 4:48 pm
Contact:

Re: Resmed Aircurve VAuto

Post by Greg Riddle » Thu Jan 29, 2015 5:03 pm

I have a copy if you want me to email it to you

User avatar
sthnreb
Posts: 614
Joined: Wed Feb 09, 2005 9:28 am
Location: Metro Atlanta

Re: Resmed Aircurve VAuto

Post by sthnreb » Thu Jan 29, 2015 5:06 pm

I would like a copy from you Greg.

_________________
MachineMask
Additional Comments: Resmed AirCurve 10 VAuto BiLevel with HumidAir
Last edited by sthnreb on Thu Jan 29, 2015 5:22 pm, edited 1 time in total.
Bi-Pap for 17 years now. Rx 12/8 and using a Resmed AirCurve 10 SAuto Bipap Auto.

User avatar
sthnreb
Posts: 614
Joined: Wed Feb 09, 2005 9:28 am
Location: Metro Atlanta

Re: Resmed Aircurve VAuto

Post by sthnreb » Thu Jan 29, 2015 5:08 pm

How do you like this machine Greg? I just got it and haven't used it overnight yet. I have been using a Respironics M series bipap. This machine is relatively new on the market.

_________________
MachineMask
Additional Comments: Resmed AirCurve 10 VAuto BiLevel with HumidAir
Bi-Pap for 17 years now. Rx 12/8 and using a Resmed AirCurve 10 SAuto Bipap Auto.

User avatar
Sir NoddinOff
Posts: 4190
Joined: Mon May 14, 2012 5:30 pm
Location: California

Re: Resmed Aircurve VAuto

Post by Sir NoddinOff » Thu Jan 29, 2015 5:10 pm

BTW... It's never a good idea to put your email address on any forum. You can edit it out anytime you like with the 'edit' button. Cool beard!

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2.
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.

Greg Riddle
Posts: 409
Joined: Wed Aug 13, 2014 4:48 pm
Contact:

Re: Resmed Aircurve VAuto

Post by Greg Riddle » Thu Jan 29, 2015 5:25 pm

I like it because it works. I couldn't get the pressure high enough on cpap. Felt like Casio for about 6 months. I'm getting better now. I've had out a month. I like it

Just sent your manual

User avatar
sthnreb
Posts: 614
Joined: Wed Feb 09, 2005 9:28 am
Location: Metro Atlanta

Re: Resmed Aircurve VAuto

Post by sthnreb » Thu Jan 29, 2015 5:26 pm

Thanks Sir. I used to participate on this forum a good while back but got away from it. I should have remembered not to post email addy. Thanks for a heads up.

_________________
MachineMask
Additional Comments: Resmed AirCurve 10 VAuto BiLevel with HumidAir
Bi-Pap for 17 years now. Rx 12/8 and using a Resmed AirCurve 10 SAuto Bipap Auto.

Greg Riddle
Posts: 409
Joined: Wed Aug 13, 2014 4:48 pm
Contact:

Re: Resmed Aircurve VAuto

Post by Greg Riddle » Thu Jan 29, 2015 5:30 pm

Your welcome. I like the controls there is more adjustability for climate control also

I'm still trying to tune it in

User avatar
sthnreb
Posts: 614
Joined: Wed Feb 09, 2005 9:28 am
Location: Metro Atlanta

Re: Resmed Aircurve VAuto

Post by sthnreb » Fri Jan 30, 2015 9:55 am

I did get the manual from Greg and from the site. Thanks. Is there a software for this machine? I saw some for the S9. I know Resmed monitors this one from myair online and it also has built in network that corresponds with them. I suppose the sleepy software works? Guessing you load the SD card to computer and add it to that software. I contacted a few online suppliers and they say according to FDA they no longer ship a clinician manual with the machines. Guess the government wants to take over everything. I said what if I need to tweak or make changes? They said have to send the machine back and have them do it. It may take 5 minutes to make changes? Wow what hoops they want folks to jump through now.

_________________
MachineMask
Additional Comments: Resmed AirCurve 10 VAuto BiLevel with HumidAir
Bi-Pap for 17 years now. Rx 12/8 and using a Resmed AirCurve 10 SAuto Bipap Auto.

User avatar
Pugsy
Posts: 63872
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Resmed Aircurve VAuto

Post by Pugsy » Fri Jan 30, 2015 10:00 am

You can try SleepyHead with this machine but it may not work optimally because this machine came out after the last Sleepyhead version.
ResScan will work though..Windows only software though...send me a private message if you want ResScan.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.