Bipap isn't workin
- beautifuldreamer
- Posts: 398
- Joined: Fri Feb 01, 2013 7:47 pm
- Location: Tennessee
Bipap isn't workin
I'm away from home on a trip. Bipap shows the power is on. But no air is blowing. Any thoughts on what might be wrong?
Thanks for any thoughts or suggestions
Thanks for any thoughts or suggestions
Machine: ResMed AirSense 11 Autoset
Mask: Bleep
Mask: Bleep
- grayghost4
- Posts: 1554
- Joined: Wed Aug 20, 2014 6:52 pm
- Location: Norther Illinois
- Contact:
Re: Bipap isn't workin
Did you remove the water from the humidifier before pack it ?
Did something get into the hose when packed ?
check the filter .. in properly ... not pluged
Did something get into the hose when packed ?
check the filter .. in properly ... not pluged
If you're not part of the solution you're just scumming up the bottom of the beaker!
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
- beautifuldreamer
- Posts: 398
- Joined: Fri Feb 01, 2013 7:47 pm
- Location: Tennessee
Re: Bipap isn't workin
Thanks.
I kept checking this morning and
I think the problem was that didn't have the humidifier connected tightly enough
- Hopefully it will work tonight:)
I kept checking this morning and
I think the problem was that didn't have the humidifier connected tightly enough
- Hopefully it will work tonight:)
Machine: ResMed AirSense 11 Autoset
Mask: Bleep
Mask: Bleep
- beautifuldreamer
- Posts: 398
- Joined: Fri Feb 01, 2013 7:47 pm
- Location: Tennessee
Re: Bipap isn't working. Still not working
Ok. Checked out the bipap again. This time I made sure the humidifier is connected properly and it is. For some reason the blower doesn't work when it's connected.
I have a heated hose. Is it ok to connect the heated hose to my bipap without the heated humidifier?
Thanks much.
I have a heated hose. Is it ok to connect the heated hose to my bipap without the heated humidifier?
Thanks much.
Machine: ResMed AirSense 11 Autoset
Mask: Bleep
Mask: Bleep
- grayghost4
- Posts: 1554
- Joined: Wed Aug 20, 2014 6:52 pm
- Location: Norther Illinois
- Contact:
Re: Bipap isn't workin
Yes the heated hose will connect directly to the 760 and clip on, however you will not have any heat .... just mike sure the electrical plug part of the hose is up and the clips will clip into the sides
If you're not part of the solution you're just scumming up the bottom of the beaker!
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
Re: Bipap isn't workin
I have used mine when I didn't want to carry 2 hoses. It didn't seem to be a problem but I believe it just works as a regular hose. Just leave off the end cap and it will plug in where the humidifier attaches. If anyone knows that it could be a problem I would like to know also.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead Software |
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
- beautifuldreamer
- Posts: 398
- Joined: Fri Feb 01, 2013 7:47 pm
- Location: Tennessee
Re: Bipap isn't workin
Thanks bunches
Ok you would never believe it. But there was something stuck in the hose. An earplug. Don't know how it got there but it took advert minutes. And finally got it out.
LOL . Too funny!!
Ok you would never believe it. But there was something stuck in the hose. An earplug. Don't know how it got there but it took advert minutes. And finally got it out.
LOL . Too funny!!
Machine: ResMed AirSense 11 Autoset
Mask: Bleep
Mask: Bleep
- grayghost4
- Posts: 1554
- Joined: Wed Aug 20, 2014 6:52 pm
- Location: Norther Illinois
- Contact:
Re: Bipap isn't workin
good thing it didn't go through when you had the mask on and get stuck in your nose
If you're not part of the solution you're just scumming up the bottom of the beaker!
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual