Good Afternoon, ladies and gents
I recently purchased a second hand ResMed s8 Unit, it worked fine for a couple of days but it now seems to be stuck on the ramping screen, I can't access any of the menus even if I try and used the 'clinician' trick.
Any help would be most welcome,
Thanks,
Pandacat!
ResMed s8 stuck Ramping, please help!
- ChicagoGranny
- Posts: 14409
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: ResMed s8 stuck Ramping, please help!
Have you tried unplugging it, waiting a minute, then starting it again?
https://www.sleepfiles.com/OSCAR/
http://www.apneaboard.com/wiki/index.ph ... OSCAR_Help
http://www.apneaboard.com/wiki/index.ph ... ganization
For those not so good with technology: https://home.sleephq.com/
http://www.apneaboard.com/wiki/index.ph ... OSCAR_Help
http://www.apneaboard.com/wiki/index.ph ... ganization
For those not so good with technology: https://home.sleephq.com/
Re: ResMed s8 stuck Ramping, please help!
The S8 has open-contact switches which have a corrosion problem, causing them to get stuck. There was an old thread with instructions on how to fix it:
viewtopic.php?f=1&t=87775
The instructions look simple if you have a background in electronics, but I haven't tried them. Good luck. I switched from an S8 Autoset II to a PR System One DS560 two nights ago.
viewtopic.php?f=1&t=87775
The instructions look simple if you have a background in electronics, but I haven't tried them. Good luck. I switched from an S8 Autoset II to a PR System One DS560 two nights ago.
_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine |
Mask: Pilairo Q Nasal Pillow CPAP Mask with Headgear |
Additional Comments: PR DS-560 System One; former S8 Autoset II user; Sleepyhead (Mac); I sometimes use the Mirage Activa |