I have a dot physical and need the last 90s of usage printed out. I used to use resscan but now its not free. Is there any other software out there you know of that i could use?>
i just need a simply display showing dates and used over 4 hours.
ResScan help
-
- Posts: 2
- Joined: Fri Mar 06, 2015 3:13 pm
ResScan help
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
- grayghost4
- Posts: 1554
- Joined: Wed Aug 20, 2014 6:52 pm
- Location: Norther Illinois
- Contact:
Re: ResScan help
What machine do you have ... model number off the machine ?
would be best to fill out your porfile in the user control panel ...left side under the blue heading
would be best to fill out your porfile in the user control panel ...left side under the blue heading
If you're not part of the solution you're just scumming up the bottom of the beaker!
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
Get the Clinicians manual here : http://apneaboard.com/adjust-cpap-press ... tup-manual
-
- Posts: 2
- Joined: Fri Mar 06, 2015 3:13 pm
Re: ResScan help
resmed s9
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
- Jay Aitchsee
- Posts: 2936
- Joined: Sun May 22, 2011 12:47 pm
- Location: Southwest Florida
Re: ResScan help
You can get ResScan by going here. You must register. Follow the instructions and a link will be sent by email.
See Archangle's Useful Links for SleepyHead
See Archangle's Useful Links for SleepyHead
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: S9 Auto, P10 mask, P=7.0, EPR3, ResScan 5.3, SleepyHead V1.B2, Windows 10, ZEO, CMS50F, Infrared Video |