What's the best way to dry out hose using a 2nd machine??
Re: What's the best way to dry out hose using a 2nd machine??
I have an old legacy REMstar Plus CPAP that I set on 4 cmH2O and use to dry out my hoses after my weekly cleaning.
It definitely blows less hard when set at 4 than when set at 10.
I'll have to experiment with a newer CPAP to see if it also blows less hard.
In my case, I have multiple hoses and let the just cleaned hose sit for a week or so after drying it out for 30 minutes or so, so drying probably makes more sense for me than it would for someone who only lets the hose sit for a day or so after washing.
It definitely blows less hard when set at 4 than when set at 10.
I'll have to experiment with a newer CPAP to see if it also blows less hard.
In my case, I have multiple hoses and let the just cleaned hose sit for a week or so after drying it out for 30 minutes or so, so drying probably makes more sense for me than it would for someone who only lets the hose sit for a day or so after washing.
_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Also SleepyHead, PRS1 Auto, Respironics Auto M series, Legacy Auto, and Legacy Plus |
Please enter your equipment in your profile so we can help you.
Click here for information on the most common alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check for yourself.
Useful Links.
Click here for information on the most common alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check for yourself.
Useful Links.
Re: What's the best way to dry out hose using a 2nd machine??
If you are really keen on drying out your hose and mask, there is a company in the suppliers list that sells a 'Hurricane' dryer that has a hose attachment place
- Tatooed Lady
- Posts: 984
- Joined: Sat Jun 07, 2014 6:18 pm
- Location: Central Wisconsin
Re: What's the best way to dry out hose using a 2nd machine??
More dry, less dry, yee-haw rope them doggies, eieio. If moldy hoses freak you out, buy a spare hose or 2, and rotate. As for humidity in the humidifier going into the hose...on a PRS1 machine, pop the humidifier lid open after use and disconnect the hose. Dump the water from the tank if you feel the need as well.
Don't think I'd recommend those little silica packs though. That might be overkill.
Don't think I'd recommend those little silica packs though. That might be overkill.
_________________
Mask: Swift™ FX For Her Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Precious and POW are very very good to me. |
As Bette Davis famously said, “Old age ain’t for sissies.”
I'm with the band.
So.Many.TOYS!
I'm with the band.
So.Many.TOYS!
- Wulfman...
- Posts: 6688
- Joined: Mon Sep 01, 2014 6:41 pm
- Location: Nearest fishing spot
Re: What's the best way to dry out hose using a 2nd machine??
JimP wrote:On the respironics unit, you have a clear plastic elbow where the hose connects.
Since it's still damp hours after turning off the machine, I can only assume that there must be some dampness up in the hose.
That's what got me thinking that I'd rather dry it out than leave it damp.
Another option would be to put an empty water tank in place and turn the humidity control off. Seems like that would work too but I'd rather not have that info added to the data card as some weird event.
And, what part of chunkyfrog's suggestion is not to your liking or seems illogical to you?
Why on earth would you "dry" a hose that you're going to put moisture back into in a short time?
Den
.
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
Re: What's the best way to dry out hose using a 2nd machine??
Hmm... mold could be a problem if there is humidity AND there is no air moving. why else is it then recommended to dry out the hose?
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
- Wulfman...
- Posts: 6688
- Joined: Mon Sep 01, 2014 6:41 pm
- Location: Nearest fishing spot
Re: What's the best way to dry out hose using a 2nd machine??
What's wrong with washing the hose before bedtime (if you REALLY feel the need to wash it)? That way the little moisture that's in it will merge right into the existing moisture coming out of the HH tank.tan wrote:Hmm... mold could be a problem if there is humidity AND there is no air moving. why else is it then recommended to dry out the hose?
In 9 1/2 years of therapy I've NEVER "cleaned" any of my hoses (either of them). That's right. I've been using my original hose with one on one of my backup machines that I alternate occasionally. I do have more stashed away but won't use them until something happens to either of my main two. I fill them with hot water occasionally (every few years) to check for leaks, but keep using them without "cleaning". There's nothing to clean out of them. I always use distilled water.
Den
.
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
Re: What's the best way to dry out hose using a 2nd machine??
I asked this before and never got an answer - "Have you seen mold in your hose"?tan wrote:Hmm... mold could be a problem if there is humidity AND there is no air moving. why else is it then recommended to dry out the hose?
- Tatooed Lady
- Posts: 984
- Joined: Sat Jun 07, 2014 6:18 pm
- Location: Central Wisconsin
Re: What's the best way to dry out hose using a 2nd machine??
I assume your equipment is stationary and doesn't go on road trips often to have lasted so long? Or did I FINALLY find something (xPAP hoses) that was made to last?Wulfman... wrote:What's wrong with washing the hose before bedtime (if you REALLY feel the need to wash it)? That way the little moisture that's in it will merge right into the existing moisture coming out of the HH tank.tan wrote:Hmm... mold could be a problem if there is humidity AND there is no air moving. why else is it then recommended to dry out the hose?
In 9 1/2 years of therapy I've NEVER "cleaned" any of my hoses (either of them). That's right. I've been using my original hose with one on one of my backup machines that I alternate occasionally. I do have more stashed away but won't use them until something happens to either of my main two. I fill them with hot water occasionally (every few years) to check for leaks, but keep using them without "cleaning". There's nothing to clean out of them. I always use distilled water.
Den
.
_________________
Mask: Swift™ FX For Her Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Precious and POW are very very good to me. |
As Bette Davis famously said, “Old age ain’t for sissies.”
I'm with the band.
So.Many.TOYS!
I'm with the band.
So.Many.TOYS!
Re: What's the best way to dry out hose using a 2nd machine??
tan wrote:Hmm... mold could be a problem if there is humidity AND there is no air moving. why else is it then recommended to dry out the hose?
Where did you see that recommended (Besides here)?
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
- Wulfman...
- Posts: 6688
- Joined: Mon Sep 01, 2014 6:41 pm
- Location: Nearest fishing spot
Re: What's the best way to dry out hose using a 2nd machine??
A couple of them travel (by auto) about a month or so out of the year. Other than that, they're next to my bed. I clean the intake (gray foam) filters every two weeks and (for the most part) only use distilled water (or filtered water in a couple of emergencies).Tatooed Lady wrote:I assume your equipment is stationary and doesn't go on road trips often to have lasted so long? Or did I FINALLY find something (xPAP hoses) that was made to last?Wulfman... wrote:What's wrong with washing the hose before bedtime (if you REALLY feel the need to wash it)? That way the little moisture that's in it will merge right into the existing moisture coming out of the HH tank.tan wrote:Hmm... mold could be a problem if there is humidity AND there is no air moving. why else is it then recommended to dry out the hose?
In 9 1/2 years of therapy I've NEVER "cleaned" any of my hoses (either of them). That's right. I've been using my original hose with one on one of my backup machines that I alternate occasionally. I do have more stashed away but won't use them until something happens to either of my main two. I fill them with hot water occasionally (every few years) to check for leaks, but keep using them without "cleaning". There's nothing to clean out of them. I always use distilled water.
Den
.
Part of my equipment longevity has been an experiment to see just how long this stuff will last. When I first started therapy, I was reading about people getting hoses and masks every few months or more often. I couldn't imagine that this stuff could wear out in such a short time and decided to do my own "durability testing". The primary mask I use is the one I started out with in May of 2005. I've changed the headgear once (although I borrowed the one from my backup mask for a couple of years in between) and the seal/cushion once. I closely follow my leak numbers and have noticed that as my seals get older, the leak rates typically get lower. Current seal/cushion has been on it since April of 2011 and the new headgear since January of 2012. I've only broken two parts on it......the forehead support when I dropped on a hard floor and that's what hit the floor first.......and the elbow in the front of the mask (that was fairly recently).......and I had spare parts to replace both when they broke.
It's not that I can't afford spares and replacements......I have quite a stockpile of everything (all purchased out-of-pocket). It was just an experiment that I started way back when and haven't finished yet..........
Den
.
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
Re: What's the best way to dry out hose using a 2nd machine??
most of Den's equipment is hewn whole out of granite by master craftsmen.Tatooed Lady wrote:I assume your equipment is stationary and doesn't go on road trips often to have lasted so long? Or did I FINALLY find something (xPAP hoses) that was made to last?Wulfman... wrote: In 9 1/2 years of therapy I've NEVER "cleaned" any of my hoses (either of them). That's right. I've been using my original hose with one on one of my backup machines that I alternate occasionally.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- Tatooed Lady
- Posts: 984
- Joined: Sat Jun 07, 2014 6:18 pm
- Location: Central Wisconsin
Re: What's the best way to dry out hose using a 2nd machine??
Cool. I'm running my own tests too. Just not sure what they are or what I'm trying to accomplish.
_________________
Mask: Swift™ FX For Her Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Precious and POW are very very good to me. |
As Bette Davis famously said, “Old age ain’t for sissies.”
I'm with the band.
So.Many.TOYS!
I'm with the band.
So.Many.TOYS!
Re: What's the best way to dry out hose using a 2nd machine??
I recently replaced a hose that I'd had four four or five years... not because there was anything wrong with the hose, but because one of the ends was getting lose and not holding onto the mask as well as it should.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- Tatooed Lady
- Posts: 984
- Joined: Sat Jun 07, 2014 6:18 pm
- Location: Central Wisconsin
Re: What's the best way to dry out hose using a 2nd machine??
So...because there was something starting to be wrong with the hose (as a whole, not separate part identifiers)...?palerider wrote:I recently replaced a hose that I'd had four four or five years... not because there was anything wrong with the hose, but because one of the ends was getting lose and not holding onto the mask as well as it should.
_________________
Mask: Swift™ FX For Her Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Precious and POW are very very good to me. |
As Bette Davis famously said, “Old age ain’t for sissies.”
I'm with the band.
So.Many.TOYS!
I'm with the band.
So.Many.TOYS!
Re: What's the best way to dry out hose using a 2nd machine??
well, honestly, I'd wrapped the end of the hose with a bit of string to tighten it, I just wanted a longer hose without using a coupler between two 6' hoses... so I bought a 3 meter hose.Tatooed Lady wrote:So...because there was something starting to be wrong with the hose (as a whole, not separate part identifiers)...?palerider wrote:I recently replaced a hose that I'd had four four or five years... not because there was anything wrong with the hose, but because one of the ends was getting lose and not holding onto the mask as well as it should.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.