SleepyHead 0.9.8-1 Testing Builds
Re: SleepyHead 0.9.8-1 Testing Builds
Had an odd little hiccup this morning, but don't have enough data to call it a bug yet. I inserted my sd card and launched Sleepyhead. It loaded my profile and previous data was all there, and then I went to the loader. The panel came up saying that I needed to insert the card, and the program was spinning waiting for that. I force-quit Sleepyhead and relaunched it, and it came up fine, but then when I went to load data it went into perma-spin asking for the card again. This time I went to Disk Utility and I unmounted the NO NAME partition in the sd card and mounted it. At which point Sleepyhead popped up the panel telling me that it had found the sd card and everything proceeded as normal.
Looking at my system.log file, there are a whole lot of Sleepyhead warnings about memory leaks, but nothing that looks like an error for the card read. I opened the laptop this morning after closing it at work last night, so there is lots of other cruft in the log file -- especially the disk mounter looking for those afs mounts that it isn't going to find because I'm not at work -- so I could have easily missed something significant.
If it happens again, I'll run it down more systematically. But if anybody else is looking for a little trick when Sleepyhead is having trouble finding the sd card, an unmount/mount cycle worked for me.
Looking at my system.log file, there are a whole lot of Sleepyhead warnings about memory leaks, but nothing that looks like an error for the card read. I opened the laptop this morning after closing it at work last night, so there is lots of other cruft in the log file -- especially the disk mounter looking for those afs mounts that it isn't going to find because I'm not at work -- so I could have easily missed something significant.
If it happens again, I'll run it down more systematically. But if anybody else is looking for a little trick when Sleepyhead is having trouble finding the sd card, an unmount/mount cycle worked for me.
Re: SleepyHead 0.9.8-1 Testing Builds
New Version is GREAT..I really like how well my Pulse and O2 is inputted and lines up with the other graphs.
I also like the fine green line and how it can show a sample reading on ALL graphs.
I also like how much more information is shown. (projected knowing more can help fix things...)
NOW I need to understand all the extra data given.
And then what to do to make my sleep better.
Thanks for the upgraded version..will it ever become a done system as I noted that the last one never did.
Rich
So is this working correctly??
I also like the fine green line and how it can show a sample reading on ALL graphs.
I also like how much more information is shown. (projected knowing more can help fix things...)
NOW I need to understand all the extra data given.
And then what to do to make my sleep better.
Thanks for the upgraded version..will it ever become a done system as I noted that the last one never did.
Rich
So is this working correctly??
_________________
Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear |
Additional Comments: I USE a Responics 960 ASV machine and a New Resmed Form lined fullface Mask plus Sheepyhead |
Re: SleepyHead 0.9.8-1 Testing Builds
A couple of suggestions:
A) The box telling us to remember to put our SD Cards back should take a click to close, it goes away way too fast to barely read it.
B) As we are told to write protect the SD Card before inserting it, this warning should also include the warning to unprotect the card before returning it to our machines...
Minor things but I think it would be better use of that window...
Rich
A) The box telling us to remember to put our SD Cards back should take a click to close, it goes away way too fast to barely read it.
B) As we are told to write protect the SD Card before inserting it, this warning should also include the warning to unprotect the card before returning it to our machines...
Minor things but I think it would be better use of that window...
Rich
_________________
Mask: ResMed AirFit™ F30 Full Face CPAP Mask with Headgear |
Additional Comments: I USE a Responics 960 ASV machine and a New Resmed Form lined fullface Mask plus Sheepyhead |
Re: SleepyHead 0.9.8-1 Testing Builds
I cannot figure out how to add a bug report.
Would appreciate a walk-through.
Thanks, Nate
Would appreciate a walk-through.
Thanks, Nate
_________________
Mask: DreamWear Nasal CPAP Mask with Headgear |
Additional Comments: ResMed AirCurve 10 ASV; Dreamwear Nasal Mask Original; CPAPMax Pillow; ResScan & SleepyHead |
Central sleep apnea AHI 62.6 pre-VPAP. Now 0 to 1.3
Present Rx: EPAP: 8; IPAPlo:11; IPAPHi: 23; PSMin: 3; PSMax: 15
"I've had a perfectly wonderful evening, but this wasn't it." —Groucho Marx
Present Rx: EPAP: 8; IPAPlo:11; IPAPHi: 23; PSMin: 3; PSMax: 15
"I've had a perfectly wonderful evening, but this wasn't it." —Groucho Marx
Re: SleepyHead 0.9.8-1 Testing Builds
http://sourceforge.net/p/sleepyhead/bugs/ you have to make an account there, I think it's pretty straightforward.NateS wrote:I cannot figure out how to add a bug report.
Would appreciate a walk-through.
Thanks, Nate
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- Denial Dave
- Posts: 1335
- Joined: Wed Sep 19, 2012 6:45 am
- Location: Connecticut
Re: SleepyHead 0.9.8-1 Testing Builds
+1
it's really easy once you've registered....
it's really easy once you've registered....
palerider wrote:http://sourceforge.net/p/sleepyhead/bugs/ you have to make an account there, I think it's pretty straightforward.NateS wrote:I cannot figure out how to add a bug report.
Would appreciate a walk-through.
Thanks, Nate
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Started at VPAP pressure setting of 20/14.4. I've survived Stage 1 cancer and lost 80+ lbs. Pressure is now 14.5 / 11 |
if you don't know where you are going... any road will take you there.... George Harrison
Re: SleepyHead 0.9.8-1 Testing Builds
Thanks a lot, Palerider and Denial Dave!palerider wrote:http://sourceforge.net/p/sleepyhead/bugs/ you have to make an account there, I think it's pretty straightforward.NateS wrote:I cannot figure out how to add a bug report.
Would appreciate a walk-through.
Thanks, Nate
I forgot that I had to sign in first!
Best wishes, Nate
_________________
Mask: DreamWear Nasal CPAP Mask with Headgear |
Additional Comments: ResMed AirCurve 10 ASV; Dreamwear Nasal Mask Original; CPAPMax Pillow; ResScan & SleepyHead |
Central sleep apnea AHI 62.6 pre-VPAP. Now 0 to 1.3
Present Rx: EPAP: 8; IPAPlo:11; IPAPHi: 23; PSMin: 3; PSMax: 15
"I've had a perfectly wonderful evening, but this wasn't it." —Groucho Marx
Present Rx: EPAP: 8; IPAPlo:11; IPAPHi: 23; PSMin: 3; PSMax: 15
"I've had a perfectly wonderful evening, but this wasn't it." —Groucho Marx
-
- Posts: 30
- Joined: Sun Jun 15, 2014 4:06 pm
MAC OSX 10.10 Yosemite and Oxymetry Import Crash (0.9.8.1)
MAC OSX 10.10 Yosemite.
Anyone else have the OXIMETER wizard crash the App as soon as it starts?
whether the oximeter is plugged in or not?
immediately after the selection of the model
Anyone else have the OXIMETER wizard crash the App as soon as it starts?
whether the oximeter is plugged in or not?
immediately after the selection of the model
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Sleepyhead Software for now |
Re: MAC OSX 10.10 Yosemite and Oxymetry Import Crash (0.9.8.1)
do you have the required usb/serial drivers installed?urbanscribe wrote:MAC OSX 10.10 Yosemite.
Anyone else have the OXIMETER wizard crash the App as soon as it starts?
whether the oximeter is plugged in or not?
immediately after the selection of the model
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
-
- Posts: 30
- Joined: Sun Jun 15, 2014 4:06 pm
Re: SleepyHead 0.9.8-1 Testing Builds
1. thanks for the reply. this was an OS upgrade so i assumed that the drivers stayed where they were but i now realize that is a faulty assumption
2. i remember finding the drivers earlier but can't find them now
- the CLICK HERE link in SH is not working on OS X
- the link itself points to this page http://sleepyhead.sourceforge.net/wiki/ ... =Main_Page which does not have information about drivers only to mention they are needed
- not seeing them in google search for "USB to Serial UART sleepyhead" anywhere
3. would you mind sending me the link for these drivers if you have them? (using OS X)
i can reinstall quickly and see if this was a simple issue.
2. i remember finding the drivers earlier but can't find them now
- the CLICK HERE link in SH is not working on OS X
- the link itself points to this page http://sleepyhead.sourceforge.net/wiki/ ... =Main_Page which does not have information about drivers only to mention they are needed
- not seeing them in google search for "USB to Serial UART sleepyhead" anywhere
3. would you mind sending me the link for these drivers if you have them? (using OS X)
i can reinstall quickly and see if this was a simple issue.
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Sleepyhead Software for now |
- MagsterMile
- Posts: 393
- Joined: Mon Dec 24, 2012 1:02 pm
- Location: Northern Illinois
Re: SleepyHead 0.9.8-1 Testing Builds
Thank you Mark for your programming skills and Pugsy for your skills at leading software/downloading novices down the right path to install v9.8. I'm up and running and love the new v 9.8. All the nice new features are waiting for me to try them out. I think it's so nice to have the ResMed icon come up with the last days usage described therein. Again thanks for all your help.
_________________
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: S9 series ResMed VPAP Adapt-pressure: Epap 6.0 ps5 - 13.0 |
Re: SleepyHead 0.9.8-1 Testing Builds
it's in this post, as well as other maccy things:urbanscribe wrote: 3. would you mind sending me the link for these drivers if you have them? (using OS X)
i can reinstall quickly and see if this was a simple issue.
viewtopic/t101034/Attention-SleepyHead- ... ml#p942850
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
-
- Posts: 30
- Joined: Sun Jun 15, 2014 4:06 pm
Re: SleepyHead 0.9.8-1 Testing Builds
thanks !
re-installed drivers
same problem (crash)
re-installed drivers
same problem (crash)
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Sleepyhead Software for now |
Re: SleepyHead 0.9.8-1 Testing Builds
ugh... well, we'll have to wait for Mark to get to feeling better, he's been under the weather the last couple weeks and hasn't felt up to programming. I'm sure that he'll get it fixed in short order though, as soon as he gets into it (he develops SH on a mbp)urbanscribe wrote:thanks !
re-installed drivers
same problem (crash)
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Re: SleepyHead 0.9.8-1 Testing Builds
I imported data from SD card from my ResMed S9 Escape Auto. it knows the machine and model and mode, but otherwise only has the compliance data. pressure is flat a 4 AHI is flat at 0. In daily view it saya "BRICK! " - and says the machine doesn't record useful data to graph in daily view.
But my DME used the same SD card to generate a report that showed variable pressure and AHI data. It appears that the data is not being read correctly.
But my DME used the same SD card to generate a report that showed variable pressure and AHI data. It appears that the data is not being read correctly.