SleepyHead 0.9.8-1 Testing Builds

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Pugsy
Posts: 64624
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: SleepyHead 0.9.8-1 Testing Builds

Post by Pugsy » Fri Oct 31, 2014 12:08 pm

journey93 wrote:I imported data from SD card from my ResMed S9 Escape Auto. it knows the machine and model and mode, but otherwise only has the compliance data. pressure is flat a 4 AHI is flat at 0. In daily view it saya "BRICK! " - and says the machine doesn't record useful data to graph in daily view.
AHI is all you get...that and pressure...with the Escape Auto. It's a half assed brick...gathers nothing else useful

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

journey93
Posts: 6
Joined: Thu Sep 25, 2014 10:20 am

Re: SleepyHead 0.9.8-1 Testing Builds

Post by journey93 » Fri Oct 31, 2014 12:39 pm

YES. I have since learned. Half-assed brick is a good term. I got you PM, but I could not reply because I did not understand the confirmation code it was asking for. Thanks

User avatar
RogerSC
Posts: 1901
Joined: Sat Jul 21, 2012 1:11 pm

Re: SleepyHead 0.9.8-1 Testing Builds

Post by RogerSC » Wed Nov 05, 2014 12:05 pm

Just tried this new version for the first time, since I had to re-install my computer. Unfortunately, I neglected to save the previous version (.9.6.3, I think). I'd like to go back to that, since while my data goes back to last year, the overview displayed is only from August of this year. That's only about 3 months of overview. I appreciate the other bug fixes, but what happened to my overview data?

Anyways, I was wondering if anyone could get me a copy of the .9.6.3 folder for Windows (dropbox, etc.), I'd be very grateful. The download site says that it's no longer available there.

User avatar
Denial Dave
Posts: 1335
Joined: Wed Sep 19, 2012 6:45 am
Location: Connecticut

Re: SleepyHead 0.9.8-1 Testing Builds

Post by Denial Dave » Wed Nov 05, 2014 12:20 pm

I don't think 0.9.8 overwrote the old version during it's installation.

You may want to look around on your PC, it may still be there in another folder.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Started at VPAP pressure setting of 20/14.4. I've survived Stage 1 cancer and lost 80+ lbs. Pressure is now 14.5 / 11
if you don't know where you are going... any road will take you there.... George Harrison

User avatar
RogerSC
Posts: 1901
Joined: Sat Jul 21, 2012 1:11 pm

Re: SleepyHead 0.9.8-1 Testing Builds

Post by RogerSC » Wed Nov 05, 2014 12:32 pm

Denial Dave wrote: You may want to look around on your PC, it may still be there in another folder.
I've looked, and since I re-installed, I've neatly removed all previous versions. One often assumes, when re-installing, that the executables that are lost can be re-acquired, data is what needs to be carefully saved. Well, I carefully saved my data *smile*, and cannot now find .9.6.3...I even backed up my data before using .9.8-1, since it needed to be "converted".

Next time I re-install, I'll make sure that I save the sleepyhead version that I'm using, but this time I didn't think that I'd need to do that.

Thanks.

User avatar
palerider
Posts: 32299
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: SleepyHead 0.9.8-1 Testing Builds

Post by palerider » Wed Nov 05, 2014 1:52 pm

you *cannot* go backwards with your data, if you try running the 9.3 version on the same datafiles you've used 9.8 on, it will wipe them out.

check the overview duration setting in the bottom left corner of the overview page.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

mecheng
Posts: 28
Joined: Mon Jun 30, 2014 1:40 pm
Location: United Kingdom

Re: SleepyHead 0.9.8-1 Testing Builds

Post by mecheng » Wed Nov 05, 2014 2:08 pm

In the new version of sleepyhead the overview graphs for zombie, weight and BMI are missing is this something I have done / not done or are they no longer supposed to be there - I miss them

_________________
Machine: PR System One REMStar 60 Series Auto CPAP Machine
Additional Comments: Sleepyhead and CMS50L pulse/ox and SPO2 Assistant
Philips Respironics Remstar Auto with A flex and humidifier. Pilaro Q mask / Swift FX mask
Wife as above. Respironics Wisp Nasal mask
Using Sleepyhead and Encore Basic software and CMS 50L pulse ox. Withing's pulse O2 and Sleep as Android for sound.

User avatar
RogerSC
Posts: 1901
Joined: Sat Jul 21, 2012 1:11 pm

Re: SleepyHead 0.9.8-1 Testing Builds

Post by RogerSC » Wed Nov 05, 2014 3:44 pm

palerider wrote:you *cannot* go backwards with your data, if you try running the 9.3 version on the same datafiles you've used 9.8 on, it will wipe them out.

check the overview duration setting in the bottom left corner of the overview page.
Yes, I read that, and saved my data before it was "converted" by 0.9.8-1. Good thing, I didn't know at that time that I wouldn't be able to download 0.9.6.3...but I'm happy that I'm cautious with my data. By the way, Carbonite also has a copy of my unconverted data, so I really didn't have to save it, but now I won't have to restore it.

I still don't have a copy of 0.9.6.3, by the way *smile*...Anyone?

Thanks.

User avatar
palerider
Posts: 32299
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: SleepyHead 0.9.8-1 Testing Builds

Post by palerider » Wed Nov 05, 2014 4:23 pm

RogerSC wrote:
palerider wrote:you *cannot* go backwards with your data, if you try running the 9.3 version on the same datafiles you've used 9.8 on, it will wipe them out.

check the overview duration setting in the bottom left corner of the overview page.
Yes, I read that, and saved my data before it was "converted" by 0.9.8-1. Good thing, I didn't know at that time that I wouldn't be able to download 0.9.6.3...but I'm happy that I'm cautious with my data. By the way, Carbonite also has a copy of my unconverted data, so I really didn't have to save it, but now I won't have to restore it.

I still don't have a copy of 0.9.6.3, by the way *smile*...Anyone?

Thanks.
did you try sleepfiles.com/SH?

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

User avatar
RogerSC
Posts: 1901
Joined: Sat Jul 21, 2012 1:11 pm

Re: SleepyHead 0.9.8-1 Testing Builds

Post by RogerSC » Wed Nov 05, 2014 5:12 pm

RogerSC wrote: I still don't have a copy of 0.9.6.3, by the way *smile*...Anyone?

Thanks.
I have a copy of this now, thanks very much to squid13!

User avatar
nelamvr6
Posts: 72
Joined: Thu Mar 07, 2013 11:29 am
Location: New London, CT, USA

Re: SleepyHead 0.9.8-1 Testing Builds

Post by nelamvr6 » Tue Dec 02, 2014 5:36 pm

I just installed this on my laptop, it has been working fine on my desktop. But when I first started it up the language was German. What can I do?

_________________
MachineMask
Additional Comments: Oscar Software. Pressure: 13/16 cmH2O

User avatar
Pugsy
Posts: 64624
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: SleepyHead 0.9.8-1 Testing Builds

Post by Pugsy » Tue Dec 02, 2014 5:52 pm

nelamvr6 wrote:I just installed this on my laptop, it has been working fine on my desktop. But when I first started it up the language was German. What can I do?
I had that happen to me one day a while back...it just up and changed and I think it was German.
Here's how I fixed it.
I went into the SleepyHead main folder and removed the languages (or it might say Translations) folder...that forced it to revert back to English.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

User avatar
nelamvr6
Posts: 72
Joined: Thu Mar 07, 2013 11:29 am
Location: New London, CT, USA

Re: SleepyHead 0.9.8-1 Testing Builds

Post by nelamvr6 » Tue Dec 02, 2014 6:04 pm

Pugsy wrote:
nelamvr6 wrote:I just installed this on my laptop, it has been working fine on my desktop. But when I first started it up the language was German. What can I do?
I had that happen to me one day a while back...it just up and changed and I think it was German.
Here's how I fixed it.
I went into the SleepyHead main folder and removed the languages (or it might say Translations) folder...that forced it to revert back to English.
That worked! Thanks again Pugsy, you saved my cookies yet again!

_________________
MachineMask
Additional Comments: Oscar Software. Pressure: 13/16 cmH2O

User avatar
Denial Dave
Posts: 1335
Joined: Wed Sep 19, 2012 6:45 am
Location: Connecticut

Re: SleepyHead 0.9.8-1 Testing Builds

Post by Denial Dave » Wed Dec 03, 2014 10:41 am

I think I've observed a very minor bug difference in the data being reported for respiration rates between Sleepyhead and Rescan... (My information has been sent to JediMark for confirmation)

The minimum and 95% respiration rate levels that are reported are exactly the same between the 2 software packages

But Sleepyhead reports that I regularly have a max respiration rate in excess of 50... Yet Rescan software has never shown anything above 30 for my maximums on the same night.

Dave

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Started at VPAP pressure setting of 20/14.4. I've survived Stage 1 cancer and lost 80+ lbs. Pressure is now 14.5 / 11
if you don't know where you are going... any road will take you there.... George Harrison

User avatar
nelamvr6
Posts: 72
Joined: Thu Mar 07, 2013 11:29 am
Location: New London, CT, USA

Re: SleepyHead 0.9.8-1 Testing Builds

Post by nelamvr6 » Sun Dec 14, 2014 9:52 am

Still loving my Sleepyhaed, but still having to boot into Windows just to use it, because there's still NOTHING for Linux...

_________________
MachineMask
Additional Comments: Oscar Software. Pressure: 13/16 cmH2O