Experimental Results of increasing pressure
Re: Experimental Results of increasing pressure
How did your AHI do upon increasing pressure
_________________
Mask: Ultra Mirage™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: Experimental Results of increasing pressure
Ever considered the possibility of OVER-oxygenation? I've seen the results first hand and it ain't pretty.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Backup/travel unit is an identical S9 AutoSet for Her w/Eson nasal mask |
Re: Experimental Results of increasing pressure
sleepy1235
Did you look at what happened to your minimum heart rate as the pressure was increased?
What happened to your Tidal Volume as you increased the pressure?
I have just installed a similar Respironics system and changing my IPAP from 17.5 to 18.0 to 19.0 has my minimum heart rate dropping from 52 to 45 to 32. The SpO2 level moved from 92% to almost 95%. I don't like the bradycardia indication so its back to IPAP of 18.0.
Did you look at what happened to your minimum heart rate as the pressure was increased?
What happened to your Tidal Volume as you increased the pressure?
I have just installed a similar Respironics system and changing my IPAP from 17.5 to 18.0 to 19.0 has my minimum heart rate dropping from 52 to 45 to 32. The SpO2 level moved from 92% to almost 95%. I don't like the bradycardia indication so its back to IPAP of 18.0.
_________________
Mask: Oracle HC452 Oral CPAP Mask |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: EverFlo Q 3.0 Liters O2 PR DSX900 ASV |
Oracle 452 Lessons Learned Updated
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.
Re: Experimental Results of increasing pressure
I think this data is not useful (valid) without the associated data such as leak rate (a biggie); the leak rate is not valid without knowing the mask make & model and pressure; and the AHI plotted along the way. Then look at the AHI broken down meaning to track the apneas & hypops along with flow limitations (not included in AHI).
I think doing it with the above data included will open up a whole new view for you.
I think doing it with the above data included will open up a whole new view for you.