Pressure setting or minimum achieve first good results?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.

Pressure setting or minimum to achieve first good results?

4+
0
No votes
5+
0
No votes
6+
0
No votes
7+
0
No votes
8+
4
21%
10+
8
42%
12+
1
5%
15+
5
26%
20+
1
5%
 
Total votes: 19

User avatar
HerbM
Posts: 274
Joined: Thu Jan 23, 2014 7:37 pm
Location: Austin, TX

Pressure setting or minimum achieve first good results?

Post by HerbM » Sat Jan 25, 2014 1:28 pm

I am curious what pressures people used when first achieving effective results.

(Not the first setting on the machine, but after a good baseline was established.)

When you first began treatment, and were able to become compliant, what was your nominal pressure setting or your minimum if using an APAP?

I am also curious what your first titration was from the sleep lab but that would be a separate question if you wished to answer it in the message text.

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Software: SleepyHead and Rescan 4.3
--
Sweet Dreams,
HerbM
Sleep study AHI: 49 RDI: 60 -- APAP 10-14 w/AHI: 0.2 avg for 7-days

"We can all breath together or we will all suffocate alone."

User avatar
Nozzelnut
Posts: 188
Joined: Thu Sep 19, 2013 2:29 pm
Location: Western, NY

Re: Pressure setting or minimum achieve first good results?

Post by Nozzelnut » Sat Jan 25, 2014 8:14 pm

My starting pressure was 8. It works OK until I start having events; then it will be up and down. 11-13 takes care of most of my OA's with an occasional bad night needing 14-15. My highest nights were about a month ago and it went up to 17 for 3 out of 7 nights. May have been runaway pressure from the low-ish starting pressure and too wide of a range. We've been adjusting the starting pressure up over the last week and next to start about 10.

_________________
Mask: Simplus Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: PRS1 60 series for back-up; Sleepyhead and Rescan 4.3

User avatar
Goofproof
Posts: 16082
Joined: Mon Dec 05, 2005 3:16 pm
Location: Central Indiana, USA

Re: Pressure setting or minimum achieve first good results?

Post by Goofproof » Sat Jan 25, 2014 11:43 pm

It makes no difference, my pressure only applys to my needs as yours does only to you. Jim
Use data to optimize your xPAP treatment!

"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire

User avatar
Pugsy
Posts: 65356
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Pressure setting or minimum achieve first good results?

Post by Pugsy » Sun Jan 26, 2014 9:21 am

A similar poll was done a few years back and I don't have time to go looking for it but there was a nice bell curve with 10 cm being the most commonly used pressure.

The titration sleep study from hell....prescribed RX at 8 cm.
Didn't take a rocket scientist to see that it was not optimal and I ended up with 10 cm minimum when using APAP mode and if I had to use cpap mode I suspect I would need around 13 or 14 cm and because of that...I always have used auto adjusting pressures....with my doctors consent once I showed her why I came up with my minimum and she recommended the max of 20 because on occasion I see 19 cm.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.


SleepyToo2
Posts: 1005
Joined: Sun Sep 11, 2011 7:55 am
Location: North of Philadelphia, PA

Re: Pressure setting or minimum achieve first good results?

Post by SleepyToo2 » Sun Jan 26, 2014 2:02 pm

Perhaps a more interesting question would be how soon after your titration was your actual pressure increased? Mine was 8 in the titration, but at the first follow-up visit it was increased to 10 when I told the doc I had woken myself and my wife up with my snoring one night. I have reduced the pressure temporarily to see what would happen as I have lost some weight (about 10 lbs), but my AHI was not improved so I went back to 10. I have also tried putting C-Flex + back on, with a negative effect on my AHI. So, basically, the titration pressure was not accurate for my real-world needs. My next machine will be an auto, which should identify whether I need a higher pressure for part of the night - my doc only believes in looking at the total AHI, so I might be looking for a different doc.

_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Use SleepyHead software.
Not a medical professional - just a patient who has done a lot of reading

User avatar
chunkyfrog
Posts: 34544
Joined: Mon Jul 12, 2010 5:10 pm
Location: Nowhere special--this year in particular.

Re: Pressure setting or minimum achieve first good results?

Post by chunkyfrog » Sun Jan 26, 2014 2:14 pm

I have never started a poll, and should I ever do so, please kick me where one may be tempted to put said poll.

_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Additional Comments: Airsense 10 Autoset for Her

User avatar
Goofproof
Posts: 16082
Joined: Mon Dec 05, 2005 3:16 pm
Location: Central Indiana, USA

Re: Pressure setting or minimum achieve first good results?

Post by Goofproof » Sun Jan 26, 2014 11:03 pm

chunkyfrog wrote:I have never started a poll, and should I ever do so, please kick me where one may be tempted to put said poll.
Or at least hit us with a pole! Don't be like Archie Bunker, don't feed a Poll Lock! Jim
Use data to optimize your xPAP treatment!

"The art of medicine consists in amusing the patient while nature cures the disease." Voltaire