Introduction

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
Sluggish
Posts: 258
Joined: Sun May 27, 2018 4:46 pm

Introduction

Post by Sluggish » Sun May 27, 2018 5:03 pm

Hello everyone!
I didn't see an introduction thread so I figured I'd say hi this way.

Hi!!

A little about my history:

Diagnosed early April 2018 via home test after living with it over 8 years.
Tested positive for MILD Sleep Apnea @ about 12 events per hour.
Got 'Resmed 10 Auto' on May 14th, 2018 - Currently trying to get acclimated etc.
Currently using Philips Dreamwear frame and nasal pillows.

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear
Top
User avatar
OkyDoky
Posts: 2870
Joined: Mon Aug 25, 2014 5:18 pm

Re: Introduction

Post by OkyDoky » Sun May 27, 2018 5:39 pm

Welcome Sluggish, your name says a lot. :wink:
If problems or questions arise, don't be afraid to ask. Hope it's smooth going for you but if not we'll help you over the bumps. Just be determined to get the best therapy for you and learn how your machine works.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
Additional Comments: Sleepyhead Software
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
Top
User avatar
zonker
Posts: 11048
Joined: Fri Jun 19, 2015 4:36 pm

Re: Introduction

Post by zonker » Sun May 27, 2018 5:42 pm

Sluggish wrote: ↑
Sun May 27, 2018 5:03 pm
 Hello everyone!
I didn't see an introduction thread so I figured I'd say hi this way.

Hi!!

A little about my history:

Diagnosed early April 2018 via home test after living with it over 8 years.
Tested positive for MILD Sleep Apnea @ about 12 events per hour.
Got 'Resmed 10 Auto' on May 14th, 2018 - Currently trying to get acclimated etc.
Currently using Philips Dreamwear frame and nasal pillows.
hello, sluggish and welcome to the forum! no, there is not separate section for introductions or anything else, for that matter. just dive on in like you have done.

when you get time, please fill in your equipment so that it shows up each time you post, like you see on the bottom of my reply here.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear
people say i'm self absorbed.
but that's enough about them.
Oscar-Win
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1-Win64.exe
Oscar-Mac
https://www.apneaboard.com/OSCAR/OSCAR-1.5.1.dmg
Top
ShiftWorker
Posts: 24
Joined: Mon May 01, 2017 5:32 am
Location: Denver CO.

Re: Introduction

Post by ShiftWorker » Mon May 28, 2018 4:06 am

Hello Sluggish.
Keep with it! I gave up way to many times, had many health issues a couple of trips to the ED and finally started to make myself become compliant, it has been a rocky road for me but I am happy I persisted and get good therapy.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear
Additional Comments: AirCurve 10 ASV In Auto Rate, 6/15/0/19/25
Top
User avatar
Sheriff Buford
Posts: 4082
Joined: Mon Aug 09, 2010 8:01 am
Location: Kingwood, Texas

Re: Introduction

Post by Sheriff Buford » Mon May 28, 2018 5:23 am

Welcome!

Sheriff

_________________
Machine: AirSense 11 Autoset
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Top


Return to “CPAP and Sleep Apnea Message Board”