Data Retrieval - ResMed S9 -36005

I see posts here that include machine settings and sleep statistics like the example below, I have the same machine, but I can't find info anywhere on how to get that from my machine. I know I have a chip card, but I can't open it up to see anything when I put it in my laptop, so I'm sure I need special software. Also, is there a user's guide somewhere that has the secret to how I can change my range if I need to? I find I need to get back on the CPAP wagon after several years of not using it...but that's another post with other questions...

Thanks for any info that can be shared or for pointing me in the right direction to find it!

AHIApnea Hypopnea Index 2.17
ResMed S9
AutoSetModel 36005 - 23131184160
PAP Mode: APAP
Min 5 Max 10 (cmH2O)
Date Sleep Wake Hours
3/27/2017 16:44:59 09:25:56 08:17:07
Large Leak 0.25%
Clear Airway 0.00
Obstructive 1.45
Unclassified Apnea 0.00
Hypopnea 0.72

Event Breakdown

Statistics
Channel Min Med 95% Max
PressureTherapy Pressure (cmH2O)
W-Avg: 8.21 5.00 8.82 10.00 10.00
EPAPExpiratory Pressure (cmH2O)
W-Avg: 5.53 4.00 5.82 7.00 7.00
Minute Vent.Amount of air displaced per minute (L/min)
W-Avg: 6.49 1.25 6.25 8.62 21.62
Resp. RateRate of breaths per minute (Breaths/min)
W-Avg: 18.03 2.00 18.00 22.00 47.00
Flow Limit.Graph showing severity of flow limitations (Severity (0-1))
W-Avg: 0.05 0.00 0.00 0.36 0.97
Leak RateRate of detected mask leakage (L/min)
W-Avg: 2.24 0.00 1.20 6.00 68.40
SnoreGraph displaying snore volume (?)
W-Avg: 0.03 0.00 0.04 0.06 0.40
Insp. TimeTime taken to breathe in (Seconds)
W-Avg: 1.59 0.04 1.50 2.22 9.96
Exp. TimeTime taken to breathe out (Seconds)
W-Avg: 1.81 0.04 1.80 2.38 4.36
Tidal VolumeAmount of air displaced per breath (ml)
W-Avg: 356.77 60.00 340.00 520.00 1180.00

Total time in apnea 00:06:20
Time over leak redline 0.255%
Machine Settings

ModeCPAP Mode APAP
Pressure MinMinimum Therapy Pressure 5 cmH2O
Pressure MaxMaximum Therapy Pressure 10 cmH2O
EPRResMed Exhale Pressure Relief Full Time
EPR LevelExhale Pressure Relief Level 3cmH2O
Session Information

For the Resmed s9 you can use either of 2 programs Rescan or Sleepyhead.
Sleepyhead is by far the best and it's the favorite program here . It just
takes a couple of minutes to download and setup.


https://sleepyhead.jedimark.net/

Here is the S9 Clinical Manual.. http://osahelp.com/clinician-manuals/S9 ... al-eng.pdf

Thank you both so much! These are just what I need. I knew there was a secret decoder ring out there somewhere! lol

Scuba Girl wrote: ↑

Wed Mar 07, 2018 2:47 pm

I see posts here that include machine settings and sleep statistics like the example below,

That came from sleepyhead.