Got my ResMed AirCurve 10 VAUTO yesterday (9-15-17)
The 1st 4 digits of the Serial Number are 2317
Since the label on the back shows it was made in Singapore, I ASS-U-ME the 1st 2 digits of 23 also mean it was made in Singapore?
I also ASS-U-ME that like the S9 AutoSet, if you substitute the 2nd digit with a 0, the 1st 4 digits become 2017 which is the year of manufacture?
I believe the last 7 digits of the Serial Number are the actual Serial Number - so it does not seem like I can determine the actual date of manufacture (day & month).
But, since it was special ordered to meet my and the Rx specific requirements, I also ASS-U-ME it would have to have been manufactured fairly recently.
That assumption is supported by the fact that it came with all of the latest software updates as noted below.
Machine: SX567-0306
Humidifier: SX556-0204
Modem: SX558-0505
It also has this long CX Number:
CX036-009-013-026-1
1-100-101
Does anyone know what this long CX Number is?
A blue ResMed 4 GB SDHC Card (Class ??) came with the machine.
I will start a separate thread to discuss my "settings".
Got my ResMed AirCurve 10 VAUTO yesterday
- StuUnderPressure
- Posts: 1377
- Joined: Mon Jun 18, 2012 10:34 am
- Location: USA
Got my ResMed AirCurve 10 VAUTO yesterday
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Cleanable Water Tub & Respironics Premium Chinstrap |
Last edited by StuUnderPressure on Sat Sep 16, 2017 12:18 pm, edited 1 time in total.
In Windows 10 Professional 64 bit Version 22H2 - ResScan Version 7.0.1.67 - ResScan Clinician's Manual dtd 2021-02
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
Re: Got my ResMed AirCurve 10 VAUTO yesterday
Why?StuUnderPressure wrote:But, since it was special ordered to meet my and the Rx specific requirements, I also ASS-U-ME it would have to have been manufactured fairly recently.
Someone just pulled a unit out of stock, and dialed in your settings. It could have been in stock for 9 months.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- StuUnderPressure
- Posts: 1377
- Joined: Mon Jun 18, 2012 10:34 am
- Location: USA
Re: Got my ResMed AirCurve 10 VAUTO yesterday
The DME had 3 other ResMed AirCurve 10 VAUTOs in it's store.
But, because I was adamant about it being brand spanking new with -0- run hours, come with the ClimateLineAir hose, come with the HumidAir Cleanable Water tub, and come with ResMed brand Hypoallergenic Filters, the DME found it prudent to just order exactly what I wanted from ResMed.
The DME took it out of the ResMed sealed box it was still in when I got there.
She was supposed to put in all the settings before I got there, but since my appointment was for right after lunch at 100 P.M. - she had not yet done that.
The Serial Number shows that it was manufactured in 2017, so it cannot have been manufactured more than 8 1/2 months ago.
The presence of the latest software versions lends credence that it was probably manufactured less than 8 1/2 months ago.
ResMed can tell you the exact date of manufacture if you call them with the Serial Number & where it was manufactured.
I did that on both of my current S9 AutoSets.
Will call for the AirCurve 10 VPAP next week.
But, because I was adamant about it being brand spanking new with -0- run hours, come with the ClimateLineAir hose, come with the HumidAir Cleanable Water tub, and come with ResMed brand Hypoallergenic Filters, the DME found it prudent to just order exactly what I wanted from ResMed.
The DME took it out of the ResMed sealed box it was still in when I got there.
She was supposed to put in all the settings before I got there, but since my appointment was for right after lunch at 100 P.M. - she had not yet done that.
The Serial Number shows that it was manufactured in 2017, so it cannot have been manufactured more than 8 1/2 months ago.
The presence of the latest software versions lends credence that it was probably manufactured less than 8 1/2 months ago.
ResMed can tell you the exact date of manufacture if you call them with the Serial Number & where it was manufactured.
I did that on both of my current S9 AutoSets.
Will call for the AirCurve 10 VPAP next week.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Cleanable Water Tub & Respironics Premium Chinstrap |
In Windows 10 Professional 64 bit Version 22H2 - ResScan Version 7.0.1.67 - ResScan Clinician's Manual dtd 2021-02
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html
SD Card Formatter 5.0.2 https://www.sdcard.org/downloads/format ... index.html