Sleepyhead stats

Can anyone help me figure out my stats from last night??

Statistics
Channel Min Med 95% Max
PressureTherapy Pressure (cmH2O)
W-Avg: 6.17 4.00 5.94 9.10 9.98
EPAPExpiratory Pressure (cmH2O)
W-Avg: 5.41 4.00 4.94 8.10 8.98
Minute Vent.Amount of air displaced per minute (L/min)
W-Avg: 4.87 0.00 4.75 7.00 15.88
Resp. RateRate of breaths per minute (Breaths/min)
W-Avg: 13.88 0.00 13.80 17.20 40.20
Flow Limit.Graph showing severity of flow limitations (Severity (0-1))
W-Avg: 0.01 0.00 0.00 0.05 0.33
Leak RateRate of detected mask leakage (L/min)
W-Avg: 2.17 0.00 0.00 13.20 74.40
SnoreGraph displaying snore volume (?)
W-Avg: 0.00 0.00 0.00 0.00 0.04
Insp. TimeTime taken to breathe in (Seconds)
W-Avg: 2.33 0.54 2.18 3.50 10.60
Exp. TimeTime taken to breathe out (Seconds)
W-Avg: 2.02 0.06 2.04 2.72 5.12
Tidal VolumeAmount of air displaced per breath (ml)
W-Avg: 350.43 0.00 340.00 520.00 1240.00

Total time in apnea 00:09:47
Time over leak redline 0.042%
Machine Settings

ModeCPAP Mode APAP
Pressure MinMinimum Therapy Pressure 4.00 cmH2O
Pressure MaxMaximum Therapy Pressure 20.00 cmH2O
Antibacterial FilterAntibacterial Filter No
Climate ControlClimate Control Auto
EPRResMed Exhale Pressure Relief Full Time
EPR LevelExhale Pressure Relief Level 1cmH2O
Humidifier StatusHumidifier Enabled Status On
Humidity LevelHumidity Level 5
MaskResMed Mask Setting Nasal
Patient AccessPatient Access No
RampRamp Enable Off
Smart StartMachine auto starts by breathing On
TemperatureClimateLine Temperature 26 ºC
Temperature EnableClimateLine Temperature Enable 1
Session Information

You have omitted a critical data point...the AHI and event category breakdown.

95% numbers...just means where you were at OR BELOW for 95% if the night. It does NOT mean where you were at for 95% of the night.

Median numbers...median average

Minimum...lowest reading

Maximum...the highest reading

Leak RateRate of detected mask leakage (L/min)
W-Avg: 2.17 0.00 0.00 13.20 74.40

The max was problem either mask removal or refitting and can be ignored.
The 95% leak number is 13.20...well below ResMed's 24 L/min line in the sand.
As long as leaks aren't waking you up...not an issue at all in terms of therapy effectiveness..good job

Time over leak redline 0.042%

Minimal time above 24 L/min...probably a very brief mask removal or refit....it can be ignored

mwpampchef wrote: Total time in apnea 00:09:47

Amount of time spent in some sort of apnea in minutes and seconds...leads me to believe your AHI is probably elevated.
What to do about it depends on what kind of apnea events were flagged. That's why the AHI and event category breakdown is important.

mwpampchef wrote:PressureTherapy Pressure (cmH2O)
W-Avg: 6.17 4.00 5.94 9.10 9.98

The most your pressure went to was 9.98...95% was 9.10 and so on...fairly typical..you don't need really high pressures to keep your airway open...means more comfortable.

For a more in depth explanation of each data point
http://www.apneaboard.com/wiki/index.ph ... SleepyHead
or my SleepyHead tutorial at the top of the Announcements section Main page of the forum.

Your machine doesn't gather oxygen levels...so there is to way to know unless you use some sort of overnight pulse ox.

Thank you for the reply... Is there a better way to get you my entire stats?

I like to see the detailed report.
See this thread for examples.
viewtopic/t103468/Need-help-with-screen-shots.html

How to use imgur to hose the image
https://sleep.tnet.com/reference/tips/imgur

How to organize the graphs....don't want all the graphs...just the basics when can be included in one image. See the thread above for examples
and how to organize...3 pages so read all 3
https://sleep.tnet.com/resources/sleepyhead/shorganize

In the meantime...what was the AHI and the breakdown into the 3 categories?