No reset data option

I am in the clinician mode for Respironics autosv advanced. I am in the info section. There is no reset data option???

Are you sure you want to erase all data?
You go into the clinical menu then highlight info, not settings, and press the wheel. There a different screen will show Reset data but you need to scroll down to see it.

I would ONLY reset data if I had just obtained a USED machine,
and out of respect for the previous user's privacy.

chunkyfrog wrote:I would ONLY reset data if I had just obtained a USED machine,
and out of respect for the previous user's privacy.

well, since there's absolutely no personal data on a cpap card, I'd reset it just so their crud didn't clutter up my data

If someone is in the Info data section and they don't see the reset option then they aren't in the clinical setup mode.
You have to be in the clinical setup mode to access features like changing modes, pressures and resetting the data.

If you still can't find it or don't know how to get to clinical set up mode go here and figure out exactly what model machine you have and get the manual for it...in the manual it explains how to get to the clinical setup mode.
http://www.apneaboard.com/adjust-cpap-p ... tup-manual

If you are wanting to reset the data because you have some other person's data on it...don't forget to erase the card too.

It would help to know why you want to erase. If the data are for another patient, you DME (or other equipment provider), should have erased all such data (but perhaps failed to do so).

There is no identity theft data stored there, but the prior data could confuse a health-care provider and distort your stats.