Encore Basic lost...need it back..help
Encore Basic lost...need it back..help
My Computer crashed and I lost my Encore basic program with almost 2 years of data....Can someone help me find the download?
If I recall the first time I had to send or receive an E-mail.....help please
If I recall the first time I had to send or receive an E-mail.....help please
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Additional Comments: Humidifier with heated hose |
- Sir NoddinOff
- Posts: 4190
- Joined: Mon May 14, 2012 5:30 pm
- Location: California
Re: Encore Basic lost...need it back..help
Good luck with that... I never had much luck even getting a reliable Encore backup. Maybe some SQL knowledgeable people will come along and get you some help, plus the download link. Did you get any other data recovered? Encore is really a problematic program in many ways. You may be able to get Sleepyhead to recover your data or most of it from your CPAP machine's SD card. Two gigs is a LOT of data... that worked for me once and I got a year and a half of data off my SD card. I was so happy when that happened. Hey, worth a shot, plus you can dump Encore basic.
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2. |
Last edited by Sir NoddinOff on Sat Feb 13, 2016 1:50 pm, edited 1 time in total.
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.
Re: Encore Basic lost...need it back..help
Here is the link I got from Pugsy back in June 2014. I don't know if a later version is available.
https://dl.dropboxusercontent.com/u/978 ... .2.2.0.zip
https://dl.dropboxusercontent.com/u/978 ... .2.2.0.zip
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: PAPCap, 3M Microfoam Surgical Tape, PoliGrip Strip, APAP 12.0 - 14.0 cm |
Re: Encore Basic lost...need it back..help
This link is to version 2.2. There is a later version 2.4 but I don't know where the download is.poppi2 wrote:Here is the link I got from Pugsy back in June 2014. I don't know if a later version is available.
https://dl.dropboxusercontent.com/u/978 ... .2.2.0.zip
I looked on the ApneaBoard and found this:
I'm not sure which version is being pointed to.Just email a message to: encorebasic@gmail.com and make sure you put "EncoreBasic" in the subject line of your email.
I set up an auto-responder that should reply back within 5 minutes or so with the download links for the software installation file. Let me know if it's not working for you.
_________________
Mask: Oracle HC452 Oral CPAP Mask |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: EverFlo Q 3.0 Liters O2 PR DSX900 ASV |
Oracle 452 Lessons Learned Updated
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.
DSX900 AutoSV with HC150 extra humidifier and Hibernite heated hose
Settings: EPAP Min-10.0, EPAP Max-17, PS Min-3, PS Max-10, Max Pressure-20, Rate-Auto, Biflex-1.
Sleepyhead and Encore Pro 2.21.
Re: Encore Basic lost...need it back..help
If you want to register in the other forum you can get 2.4.8.0 here. http://www.apneaboard.com/forums/Thread ... c+Download
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead Software |
ResMed Aircurve 10 VAUTO EPAP 11 IPAP 15 / P10 pillows mask / Sleepyhead Software / Back up & travel machine Respironics 760
Re: Encore Basic lost...need it back..help
Thank you all,thats what I was looking for but not compatible with my new windows 10.....so will wait until my windows 7 puter is repaired.
_________________
Mask: Quattro™ FX Full Face CPAP Mask with Headgear |
Additional Comments: Humidifier with heated hose |
- Sir NoddinOff
- Posts: 4190
- Joined: Mon May 14, 2012 5:30 pm
- Location: California
Re: Encore Basic lost...need it back..help
If you're going to try and run Win 7 again you might want to review this recent thread about being pressured into Win 10:Marbil146 wrote:Thank you all,thats what I was looking for but not compatible with my new windows 10.....so will wait until my windows 7 puter is repaired.
viewtopic.php?f=1&t=110254&st=0&sk=t&sd=a#p1055675
_________________
Mask: AirFit™ F10 Full Face Mask with Headgear |
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2. |
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.
Re: Encore Basic lost...need it back..help
Marbil146 wrote:Thank you all,thats what I was looking for but not compatible with my new windows 10.....so will wait until my windows 7 puter is repaired.
Exactly in this moment I am using Encore Basic 2.4.8 under Win10....It runs well.
Please try another time with the following instructions:
Extract all the files from the Zip Archive in a folder;
then right click on the EBSetup.exe file and choose "Run as Administrator".
If it refuse to run, than select EBSetup.exe, right click on it and in the windows that appears please choose "Resolve compatibility issue" and follow the instructions.
At the end select EBsetup.exe and launch it as before as an administrator.
It should work.
_________________
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Sleepyhead is the best! |
Re: Encore Basic lost...need it back..help
I downloaded it but it only opens to the download of the card.....recognizes but does nothing.....I see this is a 32 bit version and my computer is a 64 bit....is there a 64 bit version of the program?