You are 100% correct....there is a flapper valve there.palerider wrote:mptolman and fdw, I'm pretty sure you're both wrong about the anti-asphyxiation holes, there's a little flap that should seal those when the blower is on, and then air comes out from the holes around where the elbow fits into the mask proper.
get a mirror and examine those holes *closely* while the machine is running, or, pop the elbow off the mask and put your thumb over the main opening, then turn on the cpap, the flap should close and no air should come out of it.
AirFit F10 ventilation question - first night
Re: AirFit F10 ventilation question - first night
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ F10 Full Face Mask with Headgear |
ResMed AirSense S10 Autoset (Ins. Pur. 3/16/2016)
AutoCPAP 10-15 EPR 1.0 (Latest Sleep Study 3-7-16)
Started CPAP March 1995 with a pressure of 11.0
AutoCPAP 10-15 EPR 1.0 (Latest Sleep Study 3-7-16)
Started CPAP March 1995 with a pressure of 11.0
- chunkyfrog
- Posts: 34378
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nebraska--I am sworn to keep the secret of this paradise.
Re: AirFit F10 ventilation question - first night
I had a FlexiFit full face mask that had a wonky flapper.
Every once in a while, I had to get the tweezers in there because the flapper would wedge itself open.
--usually if I coughed or sneezed, but sometimes simply at random.
Last mask I ever bought from that company.
Every once in a while, I had to get the tweezers in there because the flapper would wedge itself open.
--usually if I coughed or sneezed, but sometimes simply at random.
Last mask I ever bought from that company.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |