Developing SleepyHead

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
unidee
Posts: 38
Joined: Sun Jul 12, 2015 8:28 am
Location: Helsinki Finland

Developing SleepyHead

Post by unidee » Thu Jul 30, 2015 3:37 am

I have compiled SleepyHead on my Kubuntu computer and used that software. First I made translation to finnish. And then I made a suggestion to menu. For example I don't think that language change operation is thing of help. Now I have looked daily reports. The graphs have numeral values bottom of every graphs. The Flow rate have ok test but every values in every graphs are 0.0. I have wondered if it means that I have slept too short time - 3 hours per night.

I search forum, where I can talk SleepyHead development. The irc channel is too sleepy. Is this good place?

SleepyHead is an exellent software. And I need to make that even better!

_________________
MachineMask
Additional Comments: Software Oscar. oximeter CMS50F.
Last edited by unidee on Thu Jul 30, 2015 3:54 am, edited 1 time in total.

User avatar
unidee
Posts: 38
Joined: Sun Jul 12, 2015 8:28 am
Location: Helsinki Finland

Re: Developing SleepyHead

Post by unidee » Thu Jul 30, 2015 3:51 am

I think that in source code level there is one big task to collect one display sentence from several places like display, paper report etc. to one place. So when translator (human) translates the software to other language, one translation affects to every place where it is. So if we make changes to one thing, it affects to every instances of it. And we have no need to know where there are instances of that text.

_________________
MachineMask
Additional Comments: Software Oscar. oximeter CMS50F.

User avatar
Julie
Posts: 19898
Joined: Tue Feb 28, 2006 12:58 pm

Re: Developing SleepyHead

Post by Julie » Thu Jul 30, 2015 4:31 am

Most machines don't consider anything below 4 hrs as being useful, so may not report valid data that SleepyHead can use.

User avatar
Krelvin
Posts: 1977
Joined: Tue Jun 06, 2006 5:23 pm
Location: Metro Phx Area - Dry Heat!

Re: Developing SleepyHead

Post by Krelvin » Thu Jul 30, 2015 4:42 am

unidee wrote:I have compiled SleepyHead on my Kubuntu computer and used that software. First I made translation to finnish. And then I made a suggestion to menu. For example I don't think that language change operation is thing of help. Now I have looked daily reports. The graphs have numeral values bottom of every graphs. The Flow rate have ok test but every values in every graphs are 0.0. I have wondered if it means that I have slept too short time - 3 hours per night.

I search forum, where I can talk SleepyHead development. The irc channel is too sleepy. Is this good place?

SleepyHead is an exellent software. And I need to make that even better!
Something is not right. My chart from tonight (< 3 hours so far) shows values for everything).

Image
Click for larger view
I have wondered if it means that I have slept too short time - 3 hours per night.

That little sleep a night will not help you get the therapy you need. You should be getting more than 4 hours a night at more than that, closer to 6-8 hours.

SleepyHead development is primarily done by the developer Mark. You should contact him.
Current Settings PS 4.0 over 10.6-18.0 (cmH2O) - Resmed S9 VPAP Auto w/h5i Humidifier - Quattro Air FFM
TNET Sleep Resource Pages - CPAP Machine Database
Put your equip in your Signature - SleepyHead v1.0.0-beta-1
Kevin... alias Krelvin

User avatar
Roger2
Posts: 210
Joined: Sat Jul 09, 2011 10:40 am
Location: Englewood, Colorado
Contact:

Re: Developing SleepyHead

Post by Roger2 » Thu Jul 30, 2015 4:56 am

Where do I get the latest version of your program?

Roger

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: My humidifier is the same listed but without the climate control. My software is version 3.11.009

User avatar
unidee
Posts: 38
Joined: Sun Jul 12, 2015 8:28 am
Location: Helsinki Finland

Re: Developing SleepyHead

Post by unidee » Thu Jul 30, 2015 5:40 am

Roger2 wrote:Where do I get the latest version of your program?
I think that here at Sleepfiles, if you want executables. SourceForge is now some kind of broken.

_________________
MachineMask
Additional Comments: Software Oscar. oximeter CMS50F.

User avatar
unidee
Posts: 38
Joined: Sun Jul 12, 2015 8:28 am
Location: Helsinki Finland

Re: Developing SleepyHead

Post by unidee » Thu Jul 30, 2015 5:42 am

I have problems of starting cpap sleeping therapy. But that is not a software development question. Please, don't comment that. I have a hospital session some weeks further and there I can tell to doctors what is wrong.

_________________
MachineMask
Additional Comments: Software Oscar. oximeter CMS50F.
Last edited by unidee on Thu Jul 30, 2015 5:46 am, edited 1 time in total.

User avatar
unidee
Posts: 38
Joined: Sun Jul 12, 2015 8:28 am
Location: Helsinki Finland

Re: Developing SleepyHead

Post by unidee » Thu Jul 30, 2015 5:45 am

My role of developing is mostly user interface. I am not an expert of apnea calculations. I think that if I do something, it would be nice that everybody SleepyHead users benefit of that. And I think that SleepyHead can unfold more.

One point to me: this is exploring to Qt programming and exploring to open source software production, since I have done translations 10 years ago to open source software. This is hobby to me.

_________________
MachineMask
Additional Comments: Software Oscar. oximeter CMS50F.

User avatar
Sir NoddinOff
Posts: 4190
Joined: Mon May 14, 2012 5:30 pm
Location: California

Re: Developing SleepyHead

Post by Sir NoddinOff » Thu Jul 30, 2015 9:15 am

jedimark is the person/member you want to contact. As I understand it, health issues are forcing him on a hiatus but somebody else more in the loop would have to address that specifically. Here's another link that may be useful. I found it on member palerider's signature line.
https://sleep.tnet.com/reference/tips/onlinechat

_________________
Mask: AirFit™ F10 Full Face Mask with Headgear
Additional Comments: Sleepyhead software v.0.9.8.1 Open GL and Encore Pro v2.2.
I like my ResMed AirFit F10 FFM - reasonably low leaks for my ASV therapy. I'm currently using a PR S1 AutoSV 960P Advanced. I also keep a ResMed S9 Adapt as backup. I use a heated Hibernite hose. Still rockin' with Win 7 by using GWX to stop Win 10.

User avatar
palerider
Posts: 32300
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: Developing SleepyHead

Post by palerider » Thu Jul 30, 2015 6:36 pm

Julie wrote:Most machines don't consider anything below 4 hrs as being useful, so may not report valid data that SleepyHead can use.
my vpap auto goes down to 3.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

User avatar
palerider
Posts: 32300
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: Developing SleepyHead

Post by palerider » Thu Jul 30, 2015 6:41 pm

unidee wrote:The graphs have numeral values bottom of every graphs. The Flow rate have ok test but every values in every graphs are 0.0. I have wondered if it means that I have slept too short time - 3 hours per night.
can you post a screenshot?

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

User avatar
unidee
Posts: 38
Joined: Sun Jul 12, 2015 8:28 am
Location: Helsinki Finland

Developing SleepyHead Importint to *ubuntu

Post by unidee » Fri Aug 14, 2015 12:54 am

When I put the Resmed AirSense 10 sd-card to my *ubuntu computer and I try to import data, the computer doesn't find the directory of data on sd-card. But if I open that sd-card with *ubuntus Dolphin file window and then try to import data with Sleepy Head it finds the directory straight!

Well, I think that SleepyHead can improve it's data searching operation from sd-card.

This is not a fatal bug. I can live with it and no problems after I found the reason why it can't find the data on sd-card.

_________________
MachineMask
Additional Comments: Software Oscar. oximeter CMS50F.

User avatar
palerider
Posts: 32300
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: Developing SleepyHead Importint to *ubuntu

Post by palerider » Fri Aug 14, 2015 6:32 pm

unidee wrote:When I put the Resmed AirSense 10 sd-card to my *ubuntu computer and I try to import data, the computer doesn't find the directory of data on sd-card. But if I open that sd-card with *ubuntus Dolphin file window and then try to import data with Sleepy Head it finds the directory straight!

Well, I think that SleepyHead can improve it's data searching operation from sd-card.

This is not a fatal bug. I can live with it and no problems after I found the reason why it can't find the data on sd-card.
it's more likely that your "*ubuntu computer" isn't automounting the card, therefore, there's nothing for sleepyhead to see.

I'm using xubuntu, and mine automounts the card, and sleepyhead finds it nearly instantly.

stick your card in and type either df -h or mount in a shell window and see if you see the card mounted, I bet you won't, then browse to it in your file window, and I bet, after that, you will see it mounted. nothing sleepyhead can do about that, it's your OS.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.