hOW DO i CHANGE THE PRESSURE
hOW DO i CHANGE THE PRESSURE
WOULD SOMEONE BE ABLE TO HELP ME FIGURE OUT HOW TO CHANGE THE PRESSURE ON MY phillips RESPIRONICS REMSTAR PLUS WITH CFLEX MACHINE? THANK YOU!
Re: hOW DO i CHANGE THE PRESSURE
Why do you think the pressure needs a change?
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion) |
Additional Comments: Back up is S9 Autoset...... |
- postitnote
- Posts: 922
- Joined: Sat Feb 14, 2015 4:36 pm
Re: hOW DO i CHANGE THE PRESSURE
Google and you will find a youtube video on how to do it.chriml wrote:WOULD SOMEONE BE ABLE TO HELP ME FIGURE OUT HOW TO CHANGE THE PRESSURE ON MY phillips RESPIRONICS REMSTAR PLUS WITH CFLEX MACHINE? THANK YOU!
Morbius, are you bored?
- Wulfman...
- Posts: 6688
- Joined: Mon Sep 01, 2014 6:41 pm
- Location: Nearest fishing spot
Re: hOW DO i CHANGE THE PRESSURE
Which one? Which "generation"? The "Plus" model name has been used in virtually every generation of Respironics machines.chriml wrote:WOULD SOMEONE BE ABLE TO HELP ME FIGURE OUT HOW TO CHANGE THE PRESSURE ON MY phillips RESPIRONICS REMSTAR PLUS WITH CFLEX MACHINE? THANK YOU!
I've posted the instructions of all of them on this forum many times for the past nine years or so. Shouldn't be hard to find.
Den
.
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05
Re: hOW DO i CHANGE THE PRESSURE
Chriml, you sound like you are really frustrated and almost desperate to get some relief, or maybe you just hit the caps lock when typing the post. Hard to tell.chriml wrote:WOULD SOMEONE BE ABLE TO HELP ME FIGURE OUT HOW TO CHANGE THE PRESSURE ON MY phillips RESPIRONICS REMSTAR PLUS WITH CFLEX MACHINE? THANK YOU!
Yes you can find that out and have already been given the info to do it. If you can/will take the time, what CPAP issue are you trying to address? Two weeks ago I too was looking into changing my pressure because I was still feeling like I was breathing and not getting enough air, I was very frustrated. It turns out it was not pressure but a combination of other things: my EPR setting, humidity setting, air temperature setting, Smart start was off, and starting pressure (below my min pressure) that smart start put me at before ramping up was to low, set at 4 and I needed 5.6 to be able to feel like I was getting air even before CPAP therapy was starting up.
Just saying, there is lots of info here if we get some more info. Most are only here to help.
Good luck.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Mask: Amara View Full Face CPAP Mask with Headgear |
Sleeping MUCH better now