What is your AHI?
Re: What is your AHI?
You neglected to include the leak chart in your post. It could reveal a lot about why you are having the clusters of OA.
Burying your face in the pillow could be dislodging the mask causing leaks. I did notice the OA comes in clusters along with a large rise in pressure which, to me, suggests leaks.
Burying your face in the pillow could be dislodging the mask causing leaks. I did notice the OA comes in clusters along with a large rise in pressure which, to me, suggests leaks.
_________________
Mask: SleepWeaver 3D Soft Cloth Nasal CPAP Mask with Headgear |
Additional Comments: AurCurve 10 ASV Also using Sleaplyhead 1.1, ResScan 6 and CMS50i |
Re: What is your AHI?
Last night my AHI was 6.9 which is the lowest I have ever seen, minimum pressure was 12. See below for leakage from a few nights ago and the pressure:
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear |
Re: What is your AHI?
Does anyone think straight CPAP pressure would be better for me? My median pressure is about 13-14. I am also waking up in the middle of the night and I'm not sure if this is because the pressure is increasing due to apnea events and causing leakage. It seems like if I set a straight pressure of 15 or so this would help with this. Last night my AHI was 12.3 which is just ridiculous.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear |
Re: What is your AHI?
It would really be helpful if when you post your report images you would include the AHI/Statistics on the left side of SleepyHead detailed daily reports and on the right side these graphs.
Events
Flow rate
Pressure
Leak
Flow limitations (when using a Resmed machine)
Events
Flow rate
Pressure
Leak
Flow limitations (when using a Resmed machine)
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
Re: What is your AHI?
I had my blood sugar tested at a Minute Clinic and the numbers were normal so I don't think I am diabetic.
Here are 3 days of reports, any suggestions or advice would be much apprecaited. Thanks!
Here are 3 days of reports, any suggestions or advice would be much apprecaited. Thanks!
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear |
Re: What is your AHI?
Your pressure increases seem to correspond to clusters of events. At times the pressure is sufficient and at times it is not sufficient. The 2 most common causes of pressure needs increasing are either supine sleeping or REM stage sleep or maybe a combination of both.
The pattern looks a lot like REM stage sleep pattern. The first REM stage sleep usually occurs around 90 minutes after sleep onset and as the night progresses REM stages will come around sooner and last longer.
I suspect that you are going to need at least 14 or 15 minimum if using APAP mode and might as well open up the maximum to further reduce those OAs.
If you are wanting to try cpap mode I think you are going to need 15 or 16 cm and I don't know if that will be enough to prevent whatever it is that is driving the pressure to 18 or 19 cm.
Now if you sleep primarily on your back you might be able to get by with less pressure but if you already primarily sleep on your side then that leaves REM as the possible culprit and not much we can do to prevent REM nor would we really want to.
I can't tell by these reports if you are using EPR or not but if you are using EPR say at 3 cm...you might be able to reduce the OAs by reducing or eliminating the EPR reduction.
Reducing or eliminating EPR will effectively increase the pressure some and more pressure is what is needed at times during the night for whatever the reason (supine sleep or REM sleep). Would reducing EPR (if used) be enough? I don't know and if you aren't using EPR now it is a moot point.
The pattern looks a lot like REM stage sleep pattern. The first REM stage sleep usually occurs around 90 minutes after sleep onset and as the night progresses REM stages will come around sooner and last longer.
I suspect that you are going to need at least 14 or 15 minimum if using APAP mode and might as well open up the maximum to further reduce those OAs.
If you are wanting to try cpap mode I think you are going to need 15 or 16 cm and I don't know if that will be enough to prevent whatever it is that is driving the pressure to 18 or 19 cm.
Now if you sleep primarily on your back you might be able to get by with less pressure but if you already primarily sleep on your side then that leaves REM as the possible culprit and not much we can do to prevent REM nor would we really want to.
I can't tell by these reports if you are using EPR or not but if you are using EPR say at 3 cm...you might be able to reduce the OAs by reducing or eliminating the EPR reduction.
Reducing or eliminating EPR will effectively increase the pressure some and more pressure is what is needed at times during the night for whatever the reason (supine sleep or REM sleep). Would reducing EPR (if used) be enough? I don't know and if you aren't using EPR now it is a moot point.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
Re: What is your AHI?
I currently have the lowest setting of EPR. I will adjust the minimum to 14 and max to 20. Thank you so much for your help!
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear |
Re: What is your AHI?
AHI was 8.4 last night with minimum of 14 and max of 20. This is driving me nuts!!
One good thing is that I slept more deeply last night and had pretty vivid dreams that I can still remember. So it seems like I went into deep REM sleep.
One good thing is that I slept more deeply last night and had pretty vivid dreams that I can still remember. So it seems like I went into deep REM sleep.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear |
Re: What is your AHI?
I have AHI between 0.0 to 3.0 and most central apnea!
_________________
Mask: Quattro™ Air Full Face Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Software: ResScan 4.3 |
Re: What is your AHI?
AHI was 8.0 last night.
Any suggestions or thoughts on what I should do? Should I try a straight CPAP instead of APAP? I don't know if this would even help.
Any suggestions or thoughts on what I should do? Should I try a straight CPAP instead of APAP? I don't know if this would even help.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear |
Re: What is your AHI?
You have to keep increasing the pressure until the airway is held open better and thus the apnea events related to collapsing airway is better prevented..
No matter which mode you use..cpap or apap...it's going to take more pressure.
No matter which mode you use..cpap or apap...it's going to take more pressure.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
Re: What is your AHI?
Thanks I will raise the minimum to 15 and see if it helps.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear |
Re: What is your AHI?
New machine last first time. my AHI was 2,
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: Swift™ LT Nasal Pillow CPAP Mask with Headgear |
Re: What is your AHI?
I forgot to take my medication a few nights ago and my AHI was only 3.9. When I have been taking it like I should it has been around 7 - 8. Last night it was 7.8.
The medication is sublingual, which means it dissolves under my tongue, and I think it causes my throat and tongue to go numb. This is worsening my sleep apnea. The problem is my doctor does not want me to change this medications. Ugh.
The medication is sublingual, which means it dissolves under my tongue, and I think it causes my throat and tongue to go numb. This is worsening my sleep apnea. The problem is my doctor does not want me to change this medications. Ugh.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit F30i Full Face CPAP Mask with Headgear |
Re: What is your AHI?
Hmm, you have every right to ask for an alternative if it is worsening your sleep apnea and you feel that changing pressures isn't helping at all. Remember, this doctor works for you, not the other day way around.joeljjk11 wrote:I forgot to take my medication a few nights ago and my AHI was only 3.9. When I have been taking it like I should it has been around 7 - 8. Last night it was 7.8.
The medication is sublingual, which means it dissolves under my tongue, and I think it causes my throat and tongue to go numb. This is worsening my sleep apnea. The problem is my doctor does not want me to change this medications. Ugh.
49er
_________________
Mask: SleepWeaver Elan™ Soft Cloth Nasal CPAP Mask - Starter Kit |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Use SleepyHead |