Comfort curve nasal interface
Comfort curve nasal interface
I'm looking for a mask that is quiet. I'm using the nasal swift pillow and boy is it loud. How loud is the comfort curve nasal interace?
thanks,
Littlered
thanks,
Littlered
- MissAmethyst2U
- Posts: 156
- Joined: Mon May 23, 2005 3:26 pm
- Location: Virginia
- Contact:
- christinequilts
- Posts: 489
- Joined: Sun Jan 23, 2005 12:06 pm
I find my CC is a very quiet mask. I did have to wrap the elbow connectors with teflon plumbing tape early on but the new CC I just got doesn't seem to have that same issue. I amazed how quiet the exhaust is, even if something gets near it- it seems to soften the exhaust flow so that its not blasting out like some other masks.
Comfort Curve sizing guide
I have to agree with the majority of the posts here. My Comfort Curve is very quiet. I have 3 other masks and I have to say that the Comfort Curve is the quietest.
_________________
Machine: DreamStation Auto CPAP Machine |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: Backups- FX Nano masks. Backup machine- Airmini auto travel cpap |
- johnnygoodman
- Posts: 784
- Joined: Sun Oct 24, 2004 5:13 pm
- Contact:
- wading thru the muck!
- Posts: 2799
- Joined: Tue Oct 19, 2004 11:42 am
littlered,
As far as the perceived noise level of cpap masks or machines you will find that it is a personal matter. As you can see on this thread, you will get opinions all over the map. My guess is that the relative volume and frequency is perceived as "loud" or "not loud" based on the particular auditory senses of each individual.
So, unfortunately the most accurate way to answer your question is to personally experience each interface.
As far as the perceived noise level of cpap masks or machines you will find that it is a personal matter. As you can see on this thread, you will get opinions all over the map. My guess is that the relative volume and frequency is perceived as "loud" or "not loud" based on the particular auditory senses of each individual.
So, unfortunately the most accurate way to answer your question is to personally experience each interface.
Sincerely,
wading thru the muck of the sleep study/DME/Insurance money pit!
wading thru the muck of the sleep study/DME/Insurance money pit!
This is probably the most important issue with the Comfort Curve and any other mask.johnnygoodman wrote:Remember, any mask that doesn't fit you will leak, and leaks are loud.
In my case, I found I needed to employ the MoleSkin trick and study the design of the mask to get it under control so that it would be stabile as I flop back and forth from one side to the other. This need to understand the mask design is important because Respironics doesn't do a good job of communicating how the mask should be adjusted so it is up to the user to figure out the sequence of how the mask should be adjusted and what the adjustment do the mask stability. At some point I'll write up a set of adjustment instruction and post them on the forum.
With all that said, I really like how small, quiet and comfortable this mask is in comparison to my other interfaces.
Roger...