Quantcast

Bookmark and Share
General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Wulfman
 
Posts: 12345
Joined: Thu Jul 07, 2005 3:43 pm
Location: N.W. Wyoming
Gender: Male

Re: Bipap Auto M Series Provider Manual (Respironics)

Postby Wulfman on Mon Feb 22, 2010 11:46 am



WHICH "REMstar Pro w/C-Flex" do you have? Is it the older Legacy model (like is in my profile) or is it the "M Series Pro"?

If it's the one like is in my profile, the setup instructions will look something like this.

Den


REMstar Pro 2 Setup

When in the Setup Menu, the humidifier ^ and ramp v buttons operate as up and down keys to change the settings, the left/right user buttons < > allow you to go to the previous/next question or setting, and the pressure start/stop button is used to exit the Setup Menu. Holding the humidifier or ramp buttons down will cause the values to change more quickly.

To enter the Therapy Setup Menu, hold the two top user buttons < > down while plugging in the power cord.
Continue holding the buttons down until the REMstar Pro 2 with C-Flex beeps twice.

Note: The word "setup" will appear on all of the screens indicating that you are in the Therapy Setup Menu.
If you press the Pressure start/stop button, you will exit the Setup Menu.

a. Compliance hours/nights: (recommend leaving alone, but CAN be cleared at this point)
Select next setting with >

b. Therapy mode: (CPAP or CFLE) select with ^ or v
Select next setting with >

c. CPAP or CFLE pressure setting: Select with ^ or v
Select next setting with >

d. C-Flex mode (if you chose CFLE mode): Select setting 1, 2 or 3 with ^
Select next setting with >

e: Ramp time setting: Select with ^ or v
(ramp time will be turned off with a setting of 0:00)
Select next setting with >

f. Ramp pressure setting: Select with ^ or v
Select next setting with >

g. Patient disconnect setting: 1 = on 0 = off Select with ^ or v
Select next setting with >

h. Buttons lights setting: 1 = on 0 = off Select with ^ or v

(Last setting. Use On/Off button to exit Setup)


--------------------------------------------------------------------------------------------------

If it's the M Series Pro, the setup goes something like this.

Hold down the <- -> buttons while plugging in the little power cord in the back, wait for 2 beeps release buttons. Then press the + key to enter setup mode, use the <- -> buttons to move to the next field, use the -/+ keys to decrease/increase values, when set press the On/Off button to exit Setup.

Therapy Mode = CPAP
CPAP Pressure = NN (only appears in CPAP mode).
C-Flex Setting = Off, 1, 2 or 3
Ramp Time = (0:05 to 0:45)
Ramp Start Pressure = 4.0cm (can be from 4cm to AutoMin pressure).
Mask Alert = On/Off (beeps on large leak, mask removal).
Auto Off = Off (turns off machine on large leak/mask removal) Suggest leaving it "Off"
Show AHI/Leak = On (enables logging to display) Suggest leaving it "On"
Patient Reminder = Off (days to remind you that you get a new mask w/Insurance).
returns to Therapy Mode =




==========Resetting LCD Display Data====================

To reset LCD Therapy data (does NOT erase any data from SmartCard):

1. Hold down the (<-) (->) buttons while plugging in the power on the back,
wait for 2 beeps or 5 seconds, release buttons.
2. Press the (->) key and navigate to Therapy screen.
3. Press and HOLD down the (-) minus key for 5 seconds and/or until therapy data is reset to Zero.
4. Press the (->) key to scroll back to main menu, press (+) key to enter Setup or
On/Off button to exit.



.

Many of them can be downloaded from this site:

http://www.apneaboard.com/CPAP%20Adjustment.htm

.
(4) REMstar Autos w/C-Flex & (6) Pro 2 CPAPs w/C-Flex - Pressure Setting=12 cm (straight CPAP)
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05


User avatar
6PtStar
 
Posts: 2651
Joined: Mon Jun 18, 2007 1:58 pm
Location: Texas, Is there any other place?
Gender: Male

Re: Bipap Auto M Series Provider Manual (Respironics)

Postby 6PtStar on Mon Aug 23, 2010 7:36 pm

Sent!! Check your e-mail.

Jerry

_________________
Mask: Nasal Aire II Prong CPAP Mask with Headgear
Humidifier: HC150 Heated Humidifier With Hose, 2 Chambers and Stand
Additional Comments: 11cm/H2O, Encore Pro 1.8i, Pro Analyzer, Encore Viewer1.0 - 3 Remstar Pro2's, 1 Remstar Auto
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting: "Wow what a ride!"
I still play Cowboys and Bad Guys but now I use real bullets. CAS

Raul c
 

Re: Bipap Auto M Series Provider Manual (Respironics)

Postby Raul c on Tue Oct 19, 2010 1:11 am

Could you please send me the provider manual for the respironics bipap auto m series machine. Thanks so much.
Rhc (at) San (dot) rr (dot) com

Edwardian8
 

Re: Bipap Auto M Series Provider Manual (Respironics)

Postby Edwardian8 on Mon Nov 01, 2010 4:58 pm

Hi Jerry, would you please email me a provider manual for the Respironics REMstar Auto A-Flex CPAP? Thanks!!!!

sleepytete
 

Re: Bipap Auto M Series Provider Manual (Respironics)

Postby sleepytete on Mon Nov 15, 2010 12:48 am

would someone email me Respironics BiPAP Auto M Series Provider Manual to set up the max pressures , email address is: nadimdaou_at_yahoo_dot_com

lavonnag
 
Posts: 1
Joined: Sun Jan 23, 2011 2:57 pm
Gender: None specified

Re: Bipap Auto M Series Provider Manual (Respironics)

Postby lavonnag on Mon Jan 31, 2011 2:06 pm

Hey Jerry,
Do you have one more manual left in you? :D :D I have the BiPap Auto M Series as well. I really appreciate it and will sleep happily after!

thanks,
Lavonna

kymba
 

Re: Bipap Auto M Series Provider Manual (Respironics)

Postby kymba on Tue Feb 22, 2011 8:48 pm

Hi Jerry

I have a "REMstar Plus M Series" model 201M. any chance you could email a copy of the manual to thekymba_AT_gmail_DOT_com

Thanks champ!


charcot
Also Posted As:
(charcot)
 

Re: Bipap Auto M Series Provider Manual (Respironics)

Postby charcot on Sun Nov 20, 2011 9:53 am

Can any one please send me an RESPIRONIC BiPAP AUTO 701 PROGRAMING MANUAL if possible
I need to reset the personal settings.
Thanks Rick

User avatar
Pugsy
 
Posts: 27656
Joined: Thu May 14, 2009 9:31 am
Location: SW Missouri, USA
Gender: Female

Re: Bipap Auto M Series Provider Manual (Respironics)

Postby Pugsy on Sun Nov 20, 2011 9:58 am

When people do not register to the forum we can't "send" anything to you.
Manuals for about all machines can be found here. Some by direct download and some by email request. Just make sure you specify exact name and model.
http://www.apneaboard.com/CPAP%20Adjustment.htm

_________________
Machine: PR System One REMStar 60 Series BiPAP Auto with Bi-Flex
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Humidifier: PR System One 60 Series Heated Tube Humidifier with Heated Tube
Additional Comments: S9 Adapt SV being tried now...not available as menu choice

riffdr
 

Re: Bipap Auto M Series Provider Manual (Respironics)

Postby riffdr on Thu Sep 05, 2013 3:21 pm

Hi, I am looking for the same manual for my father, I did not find a download link in the forums and searches under the word "espironics bipap auto m series with biflex" do not return any results... Can anybody please send the manual to my email address revistaciney @ gmail .com? Thank you so much


User avatar
Pugsy
 
Posts: 27656
Joined: Thu May 14, 2009 9:31 am
Location: SW Missouri, USA
Gender: Female

Re: Bipap Auto M Series Provider Manual (Respironics)

Postby Pugsy on Wed Oct 02, 2013 10:07 pm

Clinical manuals can be requested here
http://www.apneaboard.com/adjust-cpap-p ... tup-manual

_________________
Machine: PR System One REMStar 60 Series BiPAP Auto with Bi-Flex
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear
Humidifier: PR System One 60 Series Heated Tube Humidifier with Heated Tube
Additional Comments: S9 Adapt SV being tried now...not available as menu choice

Previous

Return to CPAP and Sleep Apnea (CLICK HERE TO READ POSTS)

Who is online

Users browsing this forum: chunkyfrog, Paul B, tan and 45 guests