Is there something wrong with my machine?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
PocketDragonFriend
Posts: 32
Joined: Sat Feb 02, 2008 11:02 pm
Location: Auburn, WA

Is there something wrong with my machine?

Post by PocketDragonFriend » Sun Mar 02, 2008 5:28 pm

I'm still new to this CPAP thing.

The last 2 nights I've noticed something during the night. Several times I've woken up and there was no air blowing into the mask. As I breathe, I hear the valve in the mask click and the machine kick on and air start blowing again.

Should my machine be doing this? It's a REMstarPlus M Series with C-flex and humidifier.

The Pocket Dragon motto:
Be Kinder than Necessary
----------------------------------------------------
DX: 1/2/08 RX: 18
Machine: REMstarPlus M Series w/ C-flex and humidifier
Mask: Hybrid
Mask: Ultra Mirage Full Face

User avatar
Wulfman
Posts: 12317
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Post by Wulfman » Sun Mar 02, 2008 5:33 pm

In the Setup/Configuration options, there's an option called "Auto Off". This will shut the machine off if you were to take your mask off.......BUT, a large leak will also shut it off. It's undoubtedly set to "On".

MY recommendation is to set that option to "OFF". That way, they air will keep blowing if you have a large leak.

Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

User avatar
PocketDragonFriend
Posts: 32
Joined: Sat Feb 02, 2008 11:02 pm
Location: Auburn, WA

Thanks.

Post by PocketDragonFriend » Sun Mar 02, 2008 5:36 pm

I'll check that setting.

It was set to On. I changed it to Off as you suggested.
The Pocket Dragon motto:
Be Kinder than Necessary
----------------------------------------------------
DX: 1/2/08 RX: 18
Machine: REMstarPlus M Series w/ C-flex and humidifier
Mask: Hybrid
Mask: Ultra Mirage Full Face

User avatar
rested gal
Posts: 12881
Joined: Thu Sep 09, 2004 10:14 pm
Location: Tennessee

Post by rested gal » Sun Mar 02, 2008 7:38 pm

Great advice from Den.

Pocket, I was going to suggest that you might want to invest in the Encore Viewer software to monitor your treatment for yourself...especially to be able to look at the leak graph in "Daily Details."

But, I noticed you have a Plus machine. Unfortunately the software wouldn't do you any good with that machine as the machine can't record full details. Only hour of use.

If there's any way you can go back to the DME who gave you that machine and get them to swap it for the M series Pro cpap, the M series Pro would give you information about how your treatment is going. If the DME stubs up and won't make the swap, I'd then go to the doctor and ask him to rewrite your prescription, specifying the Respironics REMstar Pro M series CPAP. Wave that under the DME's nose. If they still balk, look for a new DME as fast as you can...one who will give you the Pro machine. But the more time that passes (and the more insurance reimbursement payments made to your current DME for the Plus) the less likely a new DME would want to take you on.

Of course, check with your insurance before flouncing into the present DME's office with "Here's your machine, bye bye" on your mind, to be sure your insurance will work with another DME.

Leaks can wreck cpap treatment. You really need a machine that will give you info about that, imho.
ResMed S9 VPAP Auto (ASV)
Humidifier: Integrated + Climate Control hose
Mask: Aeiomed Headrest (deconstructed, with homemade straps
3M painters tape over mouth
ALL LINKS by rested gal:
viewtopic.php?t=17435

User avatar
PocketDragonFriend
Posts: 32
Joined: Sat Feb 02, 2008 11:02 pm
Location: Auburn, WA

Thanks for the tips.

Post by PocketDragonFriend » Mon Mar 03, 2008 12:26 pm

I changed that setting as suggested.

Last night I actually got 8 hours straight sleep with my mask on. It's the first time!

Can't help but wonder if the machine was shutting off without me realizing it so I wasn't getting the treatment I should.
The Pocket Dragon motto:
Be Kinder than Necessary
----------------------------------------------------
DX: 1/2/08 RX: 18
Machine: REMstarPlus M Series w/ C-flex and humidifier
Mask: Hybrid
Mask: Ultra Mirage Full Face

User avatar
Wulfman
Posts: 12317
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Re: Thanks for the tips.

Post by Wulfman » Mon Mar 03, 2008 1:37 pm

PocketDragonFriend wrote:I changed that setting as suggested.

Last night I actually got 8 hours straight sleep with my mask on. It's the first time!

Can't help but wonder if the machine was shutting off without me realizing it so I wasn't getting the treatment I should.

Congratulations, PDF!!!

Wishing you many more nights of the same.

Den
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05