paper tape leakage with Resmed Airsense 10, heated tube

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
Slats
Posts: 53
Joined: Wed Mar 04, 2015 12:55 am
Location: SF

paper tape leakage with Resmed Airsense 10, heated tube

Post by Slats » Sat Mar 18, 2017 4:09 pm

As a habitual mouth breather, i learnt to tape my mouth and graduated from a full face mask to Resmed p10 , nasal pillows , with great success, all thanks to folks on the message board. Now I have a new resmed air sense 10 for her , with heated tubing.Though my ahi is very low .8,I am leaking terribly each night, and have determined that the humidity is causing the tape to adhere less and that is what is causing the problem. Last night , i replaced the heated hose with a regular hose, but still leaked 50% over redline(according to Sleepyhead.

I need help.

_________________
Mask

User avatar
jtravel
Posts: 298
Joined: Sun May 22, 2016 11:45 am
Location: Tucson,AZ

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by jtravel » Sat Mar 18, 2017 4:22 pm

The Heated Hose will prevent condensation build-up in the Hose so using the standard was likely counter Productive unless you also lowered the Humidity setting.
you could try turning the Humidity off and seeing if the tape adheres and holds thru-out the night.
If your still leaking thru your mouth and the tape can't keep your mouth closed you need to use a full face Mask.
If turning Humidity off works then you can slowly add humidity until you have a problem and then back it down to where it worked.

_________________
MachineMask
Additional Comments: Apap 10-15 EPR setting of 3

User avatar
LoBattery
Posts: 158
Joined: Fri Nov 25, 2016 9:20 am

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by LoBattery » Sat Mar 18, 2017 4:50 pm

I would think that is more of an issue with facial oils on the skin. Try rubbing the area with rubbing alcohol and let dry before applying tape. I've done that before using nasal strips.
Seeing and believing are often both wrong. FOW

User avatar
Pugsy
Posts: 63941
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by Pugsy » Sat Mar 18, 2017 5:38 pm

Are you using a Respironics machine or a ResMed machine?
You mention ResMed but your profile shows Respironics.
If you are using a Respironics machine and only looking at the time over red line % it may look worse than it really is because SleepyHead's default red line is for the ResMed 24 L/min red line and Respironics doesn't use the same red line.
Respironics never tells us an exact "red line" for large leak territory to begin.

Are you seeing many prolonged large leak flags over on the Events graph?

To get a more accurate red line statistic you need to use a number that is more in line with where Respironics red line might be if they gave us one. Maybe around 60 L/min depending on mask and pressure.
You can change the red line number from 24 to 60 or whatever...Preferences/CPAP tab
Or just turn it off by removing the check mark from show the red line statistic and simply follow the Events graph for leak status.

You may not have as big of a problem as you originally thought in terms of leak.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
Last edited by Pugsy on Sun Mar 19, 2017 8:17 am, edited 1 time in total.
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

Slats
Posts: 53
Joined: Wed Mar 04, 2015 12:55 am
Location: SF

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by Slats » Sat Mar 18, 2017 7:25 pm

Hi Pugsy,

i used to sleep with a Respirontics machine and did not experience ANY leaks. Then I was given a new Resmed air sense 10 for her. I also used a resmed heated tube and that is when the leaking began.

I took a nap using a respironics machine, regular tube and ZERO leaking and no condensation on my paper tap . with the resmed machine, my tape is very damp.

I really like the Resmed air sense machine, because it is smaller (and easier to transport) and seems more advanced technologically.

Last night I tried to use the Resmed machine with a non heated tube and leaked terribly. I tried to adjust the Resmed settings ( I have the clinician's manual, thanks to Pugsy), but probably did not get the correct settings

_________________
Mask

User avatar
Pugsy
Posts: 63941
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by Pugsy » Sat Mar 18, 2017 7:36 pm

When you have time please update your profile to reflect the ResMed machine to avoid potential confusion.
Right now it is showing the PR S1 humidifier which only works with the PR S1 blower.

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

Slats
Posts: 53
Joined: Wed Mar 04, 2015 12:55 am
Location: SF

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by Slats » Sat Mar 18, 2017 7:42 pm

cannot figure out how to change machine on website,

_________________
Mask

User avatar
Pugsy
Posts: 63941
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by Pugsy » Sat Mar 18, 2017 8:03 pm

Go to the User Control link at the top left of main forum page.
Click on "Profile" Tab....then "Edit equipment"

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

tedtomato
Posts: 195
Joined: Sun Nov 13, 2016 3:30 am
Location: London, UK

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by tedtomato » Sat Mar 18, 2017 11:54 pm

Pugsy wrote:Are you using a Respironics machine or a ResMed machine?
I believe the first post was quite clear about this...

Slats
Posts: 53
Joined: Wed Mar 04, 2015 12:55 am
Location: SF

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by Slats » Sun Mar 19, 2017 3:21 pm

i used the respironics machine last night and had ZERO leaks. so now, how do i get my Resmed Airsense 10 , to stop using humidity that is causing the paper tape to loosen?

_________________
Mask

User avatar
palerider
Posts: 32300
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by palerider » Sun Mar 19, 2017 3:57 pm

Slats wrote:i used the respironics machine last night and had ZERO leaks. so now, how do i get my Resmed Airsense 10 , to stop using humidity that is causing the paper tape to loosen?
first, what makes you think you had zero leaks?

as to getting the air 10 to stop making humidity... don't put any water in it.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

Slats
Posts: 53
Joined: Wed Mar 04, 2015 12:55 am
Location: SF

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by Slats » Sun Mar 19, 2017 5:24 pm

sleepy head .

_________________
Mask

User avatar
palerider
Posts: 32300
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by palerider » Sun Mar 19, 2017 5:32 pm

Slats wrote:sleepy head .
you might want to re-evaluate your interpretation if you think a philips machine is showing zero leaks.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.

Slats
Posts: 53
Joined: Wed Mar 04, 2015 12:55 am
Location: SF

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by Slats » Sun Mar 19, 2017 5:34 pm

i am not sure why you want to be so sarcastic.....Not a good way to encourage participation

_________________
Mask

User avatar
palerider
Posts: 32300
Joined: Wed Dec 16, 2009 5:43 pm
Location: Dallas(ish).

Re: paper tape leakage with Resmed Airsense 10, heated tube

Post by palerider » Sun Mar 19, 2017 7:02 pm

Slats wrote:i am not sure why you want to be so sarcastic.....Not a good way to encourage participation
that's not sarcasm, and philips machines never show a zero leak.

_________________
Mask: Bleep DreamPort CPAP Mask Solution
Additional Comments: S9 VPAP Auto
Get OSCAR

Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.