Bipap Auto M Series Provider Manual (Respironics)

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Wulfman
Posts: 12321
Joined: Thu Jul 07, 2005 3:43 pm
Location: Nearest fishing spot

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by Wulfman » Mon Feb 22, 2010 11:46 am

Squirrels wrote:Is there any way I could get a copy of the professional manual? I have lost 50 lbs and need to adjust my pressure. I have remstar pro w c-flex.

Thanks,

Cheryl

tjmiller2@mchsi.com
WHICH "REMstar Pro w/C-Flex" do you have? Is it the older Legacy model (like is in my profile) or is it the "M Series Pro"?

If it's the one like is in my profile, the setup instructions will look something like this.

Den


REMstar Pro 2 Setup

When in the Setup Menu, the humidifier ^ and ramp v buttons operate as up and down keys to change the settings, the left/right user buttons < > allow you to go to the previous/next question or setting, and the pressure start/stop button is used to exit the Setup Menu. Holding the humidifier or ramp buttons down will cause the values to change more quickly.

To enter the Therapy Setup Menu, hold the two top user buttons < > down while plugging in the power cord.
Continue holding the buttons down until the REMstar Pro 2 with C-Flex beeps twice.

Note: The word "setup" will appear on all of the screens indicating that you are in the Therapy Setup Menu.
If you press the Pressure start/stop button, you will exit the Setup Menu.

a. Compliance hours/nights: (recommend leaving alone, but CAN be cleared at this point)
Select next setting with >

b. Therapy mode: (CPAP or CFLE) select with ^ or v
Select next setting with >

c. CPAP or CFLE pressure setting: Select with ^ or v
Select next setting with >

d. C-Flex mode (if you chose CFLE mode): Select setting 1, 2 or 3 with ^
Select next setting with >

e: Ramp time setting: Select with ^ or v
(ramp time will be turned off with a setting of 0:00)
Select next setting with >

f. Ramp pressure setting: Select with ^ or v
Select next setting with >

g. Patient disconnect setting: 1 = on 0 = off Select with ^ or v
Select next setting with >

h. Buttons lights setting: 1 = on 0 = off Select with ^ or v

(Last setting. Use On/Off button to exit Setup)


--------------------------------------------------------------------------------------------------

If it's the M Series Pro, the setup goes something like this.

Hold down the <- -> buttons while plugging in the little power cord in the back, wait for 2 beeps release buttons. Then press the + key to enter setup mode, use the <- -> buttons to move to the next field, use the -/+ keys to decrease/increase values, when set press the On/Off button to exit Setup.

Therapy Mode = CPAP
CPAP Pressure = NN (only appears in CPAP mode).
C-Flex Setting = Off, 1, 2 or 3
Ramp Time = (0:05 to 0:45)
Ramp Start Pressure = 4.0cm (can be from 4cm to AutoMin pressure).
Mask Alert = On/Off (beeps on large leak, mask removal).
Auto Off = Off (turns off machine on large leak/mask removal) Suggest leaving it "Off"
Show AHI/Leak = On (enables logging to display) Suggest leaving it "On"
Patient Reminder = Off (days to remind you that you get a new mask w/Insurance).
returns to Therapy Mode =




==========Resetting LCD Display Data====================

To reset LCD Therapy data (does NOT erase any data from SmartCard):

1. Hold down the (<-) (->) buttons while plugging in the power on the back,
wait for 2 beeps or 5 seconds, release buttons.
2. Press the (->) key and navigate to Therapy screen.
3. Press and HOLD down the (-) minus key for 5 seconds and/or until therapy data is reset to Zero.
4. Press the (->) key to scroll back to main menu, press (+) key to enter Setup or
On/Off button to exit.



.

Many of them can be downloaded from this site:

http://www.apneaboard.com/CPAP%20Adjustment.htm

.
(5) REMstar Autos w/C-Flex & (6) REMstar Pro 2 CPAPs w/C-Flex - Pressure Setting = 14 cm.
"Passover" Humidification - ResMed Ultra Mirage FF - Encore Pro w/Card Reader & MyEncore software - Chiroflow pillow
User since 05/14/05

cplad
Posts: 1
Joined: Mon Aug 23, 2010 7:25 pm

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by cplad » Mon Aug 23, 2010 7:27 pm

Jerry,

Would appreciate your sending one my way also.

cplad@airmail.net

Many thanks!

Cindy

User avatar
6PtStar
Posts: 2659
Joined: Mon Jun 18, 2007 1:58 pm
Location: Texas, Is there any other place?

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by 6PtStar » Mon Aug 23, 2010 7:36 pm

Sent!! Check your e-mail.

Jerry

_________________
Humidifier: HC150 Heated Humidifier With Hose, 2 Chambers and Stand
Additional Comments: 11cm/H2O, Encore Pro 1.8i, Pro Analyzer, Encore Viewer1.0 - 3 Remstar Pro2's, 1 Remstar Auto
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting: "Wow what a ride!"
I still play Cowboys and Bad Guys but now I use real bullets. CAS

Raul c

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by Raul c » Tue Oct 19, 2010 1:11 am

Could you please send me the provider manual for the respironics bipap auto m series machine. Thanks so much.
Rhc (at) San (dot) rr (dot) com

Edwardian8

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by Edwardian8 » Mon Nov 01, 2010 4:58 pm

Hi Jerry, would you please email me a provider manual for the Respironics REMstar Auto A-Flex CPAP? Thanks!!!!

sleepytete

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by sleepytete » Mon Nov 15, 2010 12:48 am

would someone email me Respironics BiPAP Auto M Series Provider Manual to set up the max pressures , email address is: nadimdaou_at_yahoo_dot_com

lavonnag
Posts: 1
Joined: Sun Jan 23, 2011 2:57 pm

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by lavonnag » Mon Jan 31, 2011 2:06 pm

Hey Jerry,
Do you have one more manual left in you? I have the BiPap Auto M Series as well. I really appreciate it and will sleep happily after!

thanks,
Lavonna

kymba

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by kymba » Tue Feb 22, 2011 8:48 pm

Hi Jerry

I have a "REMstar Plus M Series" model 201M. any chance you could email a copy of the manual to thekymba_AT_gmail_DOT_com

Thanks champ!

danfortune5000
Posts: 1
Joined: Sun Jun 05, 2011 4:41 pm

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by danfortune5000 » Sun Jun 05, 2011 4:47 pm

Could you please send me the provider manual for the respironics bipap auto m series machine. Thanks so much.

dan@fortune.org

charcot

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by charcot » Sun Nov 20, 2011 9:53 am

Can any one please send me an RESPIRONIC BiPAP AUTO 701 PROGRAMING MANUAL if possible
I need to reset the personal settings.
Thanks Rick

User avatar
Pugsy
Posts: 63941
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by Pugsy » Sun Nov 20, 2011 9:58 am

When people do not register to the forum we can't "send" anything to you.
Manuals for about all machines can be found here. Some by direct download and some by email request. Just make sure you specify exact name and model.
http://www.apneaboard.com/CPAP%20Adjustment.htm

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.

riffdr

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by riffdr » Thu Sep 05, 2013 3:21 pm

Hi, I am looking for the same manual for my father, I did not find a download link in the forums and searches under the word "espironics bipap auto m series with biflex" do not return any results... Can anybody please send the manual to my email address revistaciney @ gmail .com? Thank you so much

leroycraft
Posts: 1
Joined: Wed Oct 02, 2013 8:46 pm

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by leroycraft » Wed Oct 02, 2013 8:52 pm

Hi,
Just found this site. I would like to request a Provider Manual for the Respironics Bipap Auto M Series machine.
email at lstillings@ymail.com
Thanks.

User avatar
Pugsy
Posts: 63941
Joined: Thu May 14, 2009 9:31 am
Location: Missouri, USA

Re: Bipap Auto M Series Provider Manual (Respironics)

Post by Pugsy » Wed Oct 02, 2013 10:07 pm

Clinical manuals can be requested here
http://www.apneaboard.com/adjust-cpap-p ... tup-manual

_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/
I may have to RISE but I refuse to SHINE.

If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.