Zeo has scrubbed most their resources from the web. Find alternative sources here: https://forum.quantifiedself.com/thread ... 73#pid3373 and updated installation instructions here: https://forum.quantifiedself.com/thread ... 57#pid3057
For a newer, windows based viewer see here: https://forum.quantifiedself.com/thread ... ep-monitor
With Zeo apparently out of business, owners of the Zeo Bedside Model may want to install this viewer which allows continued off-line access to sleep data. The viewer is rather rudimentary, but it does provide access to all the sleep data stored on the SD card. (Installing the viewer or decrypting the data card does not prevent normal use of the myZeo Sleep Coach website.) Uploading data to the myZeo Sleep Coach web-site, which then can be downloaded (export) in CSV format, will save any data collected prior to installation.
The viewer runs on JAVA. Before beginning, remove all previous versions of JAVA from your computer and download the most recent from JAVA.com. (Instructions are provided to disable JAVA in various browsers if security is a concern.)
Installing the viewer is a two part process: First, install a firmware update to decrypt the SD data card and second, install the Zeo Decoder Viewer.
Review the topics for an overview of the steps in the process, here: http://zeodecoderview.sourceforge.net/
Then register and download the firmware update 2.6.3O to decrypt the SD card, here: http://developers.myzeo.com/data-decoder-library/ (Data Decorder Firmware). See edits below if link is broken.
Follow these instructions to install the firmware and avoid mixing encrypted and decrypted data on the SD card:
- Upload to the website as usual to save the currently encrypted data.
- Download the firmware-v2.6.3O zip file and extract the zeo.img file.
- Put the Zeo SD card in the computer. Place the zeo.img file on the SD card in the Zeo folder with the ZeoSleep.dat file . Insert the Card into the Zeo.
- Update the firmware on the Zeo by following these steps:
a. Press the settings button.
b. Press the right button 7 times to show the software version.
c. Press the down button to load the new firmware. - Tell Zeo to erase the Zeo SD card (settings, then right 5 times, then down).
- Use the Zeo as usual
To install the viewer, go here: https://sourceforge.net/projects/zeodecoderview/files/ (SourceForge Downloads)
- Select (0.2a2), then select (ZeoDecoderViewer0.2a2Release.zip) and download it.
Do not use version 0.3a as it appears to be broken as of this writing.
You do not need (source_ZeoDecoderViewer0.2a2.zip), the other zip file. - Copy the downloaded zip file to a working location of choice and extract the files
With the Zeo SD card in your PC after capturing new data, open the viewer, select File, select Load DAT File, navigate to your SD card and open the ZeoSleep data file, as if you were uploading to the site. This should load all the data on the card for viewing. Select the year, month, day of the desired data to view.
by
quietmorning and
Jay Aitchsee
Edit:
The links above appeared to be operational again on 5/09.
Check post # 6 at https://forum.quantifiedself.com/showthread.php?tid=654 as another possible source should the above links become inoperable.
Or here, http://dl.dropboxusercontent.com/u/8519 ... 3R-zeo.img to use firmware 2.6.3R which will work in place of 2.6.3O