ResScan -> 4.02
Re: ResScan 3.10 -> 3.14
Uncle_Bob
That link downloads an .exe which won't install on my Windows 7 machine. It says it does not support Win 7.
Would you please point me to a Win 7 download address, should there be one?
thank you
Uncle_Tom
That link downloads an .exe which won't install on my Windows 7 machine. It says it does not support Win 7.
Would you please point me to a Win 7 download address, should there be one?
thank you
Uncle_Tom
Re: ResScan 3.10 -> 3.14
I have an s9 elite, and am new to cpap. If I download the 3.14 do I type in all MY info into the required fields. I don't want to "get in trouble" . Also, once I download to my Windows 7, can I just take out the sd card from my machine, stick in my computer and I'm good to go? Is there some "manual" on how to use/interpret the software?
_________________
Mask: Swift™ FX For Her Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: |
- cpapernewbie
- Posts: 685
- Joined: Fri Oct 13, 2006 5:53 pm
Re: ResScan 3.10 -> 3.14
the manual is included with the software.... Just installed successfully 3.14
My version was 3.12 Previously I did not need to uninstall first before installing new version. This time I had to uninstall 3.12, then install 3.14, otherwise there are strange message requesting MSI file.
Use Windows 7 Professional, no problem
My version was 3.12 Previously I did not need to uninstall first before installing new version. This time I had to uninstall 3.12, then install 3.14, otherwise there are strange message requesting MSI file.
Use Windows 7 Professional, no problem
_________________
Machine: DreamStation Auto CPAP Machine |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: CPAP history: dumb tank, auto, PR M, PR System 1, PR BIPAP, PR System 1 model 60, Resmed S9, Resmed S10, Dreamstation |
Resmed airsense 10
Re: ResScan 3.10 -> 3.14
hi, I'm new here. can someone please help me with where I can get this software? I dont like knowing what this machine is doing for me and want some more control. thanx in advance!
Re: ResScan 3.10 -> 3.14
Look through this thread for a post by forum member Uncle_Bob. Check his signature for information on obtaining the software.sean71 wrote:hi, I'm new here. can someone please help me with where I can get this software? I dont like knowing what this machine is doing for me and want some more control. thanx in advance!
Also please register with the forum. Then someone could send you a private message about getting the software.
We can't send private messages unless you register. While you are at it please add your equipment. Think explains how.
wiki/index.php/Registering_Equipment_in_User_Profile
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
Re: ResScan 3.10 -> 3.14
Hello, I am new to CPAP, have a Resmed S9, and am trying to learn more about the settings and how well (?) it is working for me. I would appreciate a PM regarding the best way to obtain the ResScan software. Thank you.
_________________
Mask: Mirage™ FX Nasal CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
-
- Posts: 1
- Joined: Sun Aug 14, 2011 4:31 pm
Re: ResScan 3.10 -> 3.14
Hello,
I would liked to download the ResScan 3.14 software. Can someone please send me a link or the file itself?
I tried completing the form on ResMed's website and downloaded the file but when trying to run the application, I kept getting an error saying "file is corrupt". Tried to download it again, but got the same message.
Thank you!
Colleen
I would liked to download the ResScan 3.14 software. Can someone please send me a link or the file itself?
I tried completing the form on ResMed's website and downloaded the file but when trying to run the application, I kept getting an error saying "file is corrupt". Tried to download it again, but got the same message.
Thank you!
Colleen
Re: ResScan 3.10 -> 3.14
I think the link that Uncle_Bob offers is to the same ResMed website where we have to fill all that information out on that form. If you scroll up a bit to one of his posts you can try it. Just look in his signature line for the link. I used his link and I got to the information form myself. I think he does have a way to perhaps get the previous version. Someone else would have to tell you how as I don't remember.chowell114 wrote: I would liked to download the ResScan 3.14 software. Can someone please send me a link or the file itself?
I tried completing the form on ResMed's website and downloaded the file but when trying to run the application, I kept getting an error saying "file is corrupt". Tried to download it again, but got the same message.
SleepyHead will now work with ResMed machines if you can't get ResScan to download clean.
http://sourceforge.net/projects/sleepyhead/
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
-
- Posts: 1
- Joined: Wed Aug 31, 2011 2:49 am
Re: ResScan 3.10 -> 3.14
Please PM me the link to get ResScan 3.11. Thank you in advance.
Re: ResScan 3.10 -> 3.14
first post to forums. thank you all for the references and info. jus to make sure, dl'g the software is not infringing on copyright? jus as long as its for personal use right?
-
- Posts: 29
- Joined: Wed Sep 14, 2011 12:10 pm
Re: ResScan 3.10 -> 3.14
Is there an update on SleepyHead with ResMed yet? I got my resmed machine yesterday, and tried to download the numbers today, but got all kinds of crazy errors and program crashes.tschultz wrote:The ResMed data support for SleepyHead is getting very close and will be work on Mac, Linux and Windows with my major development being done on a Mac at this time.Breathe Jimbo wrote:Keep an eye out for SleepyHead, currently in rapid development. It will have a Mac version. Not working with ResMed data yet.
Alternatively, I may just download and install the other software, dunno, I'm still figuring this all out.
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: (New machine 9/15) |
Re: ResScan 3.10 -> 3.14
ResMed users are using SleepyHead.AlanMacNeill wrote:Is there an update on SleepyHead with ResMed yet? I got my resmed machine yesterday, and tried to download the numbers today, but got all kinds of crazy errors and program crashes
Your problem will get attention best in SH thread.. That is where the bugs are discussed.
viewtopic.php?f=1&t=65738&st=0&sk=t&sd=a&start=480
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
- Perrybucsdad
- Posts: 834
- Joined: Mon Sep 12, 2011 7:09 am
- Location: Northeast Ohio
Re: ResScan 3.10 -> 3.14
Does anyone know if ResMed provides a Change Log document when it upgrades? Just would be nice to see what bugs were fixed and what enhancements were made.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: ResScan v5.9; Sleepyhead v1.0.0-beta |
Re: ResScan 3.10 -> 3.14
I've only ever seen a description of what additional machines are supported.Perrybucsdad wrote:Does anyone know if ResMed provides a Change Log document when it upgrades? Just would be nice to see what bugs were fixed and what enhancements were made.
Bugs fixes have never been explained in detail as far as I'm aware.