Cpap and beards
Re: Cpap and beards
Yes. OP listed a full face mask in his profile---
_________________
Machine: DreamStation Auto CPAP Machine |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Humidifier: DreamStation Heated Humidifier |
Additional Comments: Backups- FX Nano masks. Backup machine- Airmini auto travel cpap |
Re: Cpap and beards
spoken like a true DME, just shove what you want onto the patient.ChicagoGranny wrote:Part of giving good answers is to understand that patients are often asking the wrong question.grayghost4 wrote:the OP did NOT ask for the best FF mask ....
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
- ChicagoGranny
- Posts: 14516
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: Cpap and beards
palerider wrote: palerider
You know that as well as I do. I have seen too many of your answers to think otherwise.wrote:Part of giving good answers is to understand that patients are often asking the wrong question.
Dreaming up stuff this morning? Check the thread - I have not recommended anything to the OP.palerider wrote: just shove what you want onto the patient.
Re: Cpap and beards
the difference is that I try to find out what they actually are trying to say, but don't have the words, instead of just assuming what they mean.ChicagoGranny wrote:Part of giving good answers is to understand that patients are often asking the wrong question. ...
You know that as well as I do. I have seen too many of your answers to think otherwise.
no, you've just derided other people, because they didn't make the same ASSumptions you did.ChicagoGranny wrote:Dreaming up stuff this morning? Check the thread - I have not recommended anything to the OP.palerider wrote: just shove what you want onto the patient.
Get OSCAR
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
Accounts to put on the foe list: dataq1, clownbell, gearchange, lynninnj, mper!?, DreamDiver, Geer1, almostadoctor, sleepgeek, ajack, stom, mogy, D.H., They often post misleading, timewasting stuff.
-
- Posts: 48
- Joined: Mon Jan 05, 2015 2:12 pm
- Location: Brooklyn, NY
Re: Cpap and beards
I haven't been on here in a long time but I'm a full bearded fellow too and use the Airfit P10 Mask and a chin strap to keep my mouth closed. Has worked perfectly for me for over a year with no leaks or other issues.
Looks ridiculous but I sleep soundly. I tried full face and nasal masks but the pillows is what worked out best ultimately.
Looks ridiculous but I sleep soundly. I tried full face and nasal masks but the pillows is what worked out best ultimately.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: SleepyHead Software, APAP 4-16, ClimateLineAir Hose, Medium Pillows |
- chunkyfrog
- Posts: 34432
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nebraska--I am sworn to keep the secret of this paradise.
Re: Cpap and beards
Due to horrible congestion, last night I started out with my F20.
After hubby brought me the "good" nasal spray and some green gel caps,
my nose cleared up enough to switch out to my P10.
AWESOME!
He's not my beard, but his is white, and he is so helpful.
I (((heart))) him.
After hubby brought me the "good" nasal spray and some green gel caps,
my nose cleared up enough to switch out to my P10.
AWESOME!
He's not my beard, but his is white, and he is so helpful.
I (((heart))) him.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
Re: Cpap and beards
Yes I diSheriff Buford wrote:Yay: do you mouth breath?
Sheriff
_________________
Machine: AirSense™ 10 CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ F10 Full Face Mask with Headgear |
Re: Cpap and beards
Yea I'm a mouth breather and use full face mask sorry should've been more specificChicagoGranny wrote:Your profile shows you use a full face mask (FFM). Is it the case that you sometimes mouth breathe and must continue to use a FFM?Yayoe10 wrote:is there a certain mask which is "best" for someone with a beard ? Or would they all
Be roughly about the same.
_________________
Machine: AirSense™ 10 CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ F10 Full Face Mask with Headgear |
Re: Cpap and beards
Forum member Bonjour has a big Santa Claus beard.
See his avatar
memberlist.php?mode=viewprofile&u=40953
He uses the Respironics Amara View full face mask.
See his avatar
memberlist.php?mode=viewprofile&u=40953
He uses the Respironics Amara View full face mask.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
Re: Cpap and beards
Hi y'all,
I am new to this forum and I came here because I am having one heck of a time with a leaky mask.
After 12 years i was finally able to replace my old cpap machine and I am guessing that the old one was not putting out the correct pressure because the new one is about to blow me out of the room. I have had it checked and the new one is putting out the correct pressure but I have to let it ramp up for 30 minutes so I can get to sleep.
The new machine is a resmed airsense 10 elite and its crabbing every night about mask leaks and my wife is also crabbing about all of the noise that the mask is making, she wakes me up to let me to adjust it, or the leaking sounds wake me up.
I can get the mask to quit leaking by tightening the straps down real tight but then the mask is digging into the bridge of my nose. The mask i am using is Phillips resperonic comfort gel, been using one of these since i started using my cpap in 1997.
Anyone have any suggestions?
Thanks,
JD
I am new to this forum and I came here because I am having one heck of a time with a leaky mask.
After 12 years i was finally able to replace my old cpap machine and I am guessing that the old one was not putting out the correct pressure because the new one is about to blow me out of the room. I have had it checked and the new one is putting out the correct pressure but I have to let it ramp up for 30 minutes so I can get to sleep.
The new machine is a resmed airsense 10 elite and its crabbing every night about mask leaks and my wife is also crabbing about all of the noise that the mask is making, she wakes me up to let me to adjust it, or the leaking sounds wake me up.
I can get the mask to quit leaking by tightening the straps down real tight but then the mask is digging into the bridge of my nose. The mask i am using is Phillips resperonic comfort gel, been using one of these since i started using my cpap in 1997.
Anyone have any suggestions?
Thanks,
JD
Re: Cpap and beards
One of the things that work for myself and some bearded friends is simply to shave the area under your lower lip. It seems to work for any full face mask.The area only has to be as wide as the shaver head. I think what happens is the mask simply slips down on the hair but shaving a small area gives the mask a place to dig in and hold.
- ChicagoGranny
- Posts: 14516
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: Cpap and beards
And you know that is not the way the masks are designed to be used. Here are some tips:jdftrwrth wrote:I can get the mask to quit leaking by tightening the straps down real tight
To reduce unintentional mask leak -
- Make sure the mask is fitted properly. (See mask manufacturer's video.)
- Make sure the headgear is adjusted properly (See mask manufacturer's video.)
- If you use a low ramp pressure or a low minimum pressure, you should fit and adjust your mask at the higher pressures it is operating at for most of the night. You would temporarily change the machine pressure settings while you do the fitting and adjusting. It's best to do this well before bedtime before you are tired and ready for sleep. Don't forget to change your settings back to the ones you prefer.
- Make sure to use good hose management - the hose should not pull on the mask. Notice how your hose is positioned between machine and mask. It should be positioned to minimize any pull on the mask. Hose management is an individual practice. How it is done depends on the mask, the position of the machine, your sleeping position and other factors specific to the individual.
- If you still have problems, learn from the forum what mask liners are available.
- If your mask still has excessive leak, try other masks. Many people report trying several masks before they find one that works well for them.
Note: Links to just some of the mask manufacturers' instructional videos can be found on the forum host's website - https://www.cpap.com/cpap-masks.php and https://www.youtube.com/
- CG
What is the pressure setting?jdftrwrth wrote: I have had it checked and the new one is putting out the correct pressure
Here are some videos that might help - https://www.youtube.com/results?search_ ... omfort+gel
- ChicagoGranny
- Posts: 14516
- Joined: Sun Jan 29, 2012 1:43 pm
- Location: USA
Re: Cpap and beards
That's not too high of a pressure. I always considered 14 to be starting into the "high" range.jdftrwrth wrote:12 psi
If I understand you correctly, that mask has been a success for you for 20 years. It's very puzzling why a change in machines coincides with a big mask-leak problem. Did you perhaps place the new machine in a different position? Does the hose run differently from the machine to the mask?jdftrwrth wrote:The mask i am using is Phillips resperonic comfort gel, been using one of these since i started using my cpap in 1997.
Have you selected Full Face Mask instead of Nasal in the new machine's menu?
I have an older machine, and it has a setting for Slimline hose and Normal hose. If the wrong hose is selected, the machine will perform differently. From looking at the AirSense user manual, I don't see this option. Maybe ResMed did away with it on this machine?
Re: Cpap and beards
No...those options are still there. Just not showing in the manual.ChicagoGranny wrote:I have an older machine, and it has a setting for Slimline hose and Normal hose. If the wrong hose is selected, the machine will perform differently. From looking at the AirSense user manual, I don't see this option. Maybe ResMed did away with it on this machine?
When/if the ClimateLine Air heated hose is used the machine will automatically make the correct hose selection for you...can't mess it up.
Now if a non heated hose is use the 2 choices are available...slimline and regular 22 mm hose.
I just got an AirCurve a couple of weeks ago and didn't have the heated hose for a few days and I saw both non heated hose settings available. Once I got the heated hose attached the machine recognized it and made the appropriate selection for me.
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.