Quantcast

Bookmark and Share
General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Uncle_Bob
 
Posts: 2341
Joined: Tue Feb 24, 2009 12:10 pm
Location: Arizona
Gender: Male

Re: ResScan 3.10 -> 3.14

Postby Uncle_Bob on Thu Apr 14, 2011 2:39 pm

BernieRay wrote:To be honest, though, what could we gain by displaying this higher capture rate pressure data?


Yep, I aint seeing it and I'm not bothered either :wink:

BernieRay
 
Posts: 396
Joined: Tue Nov 30, 2010 8:21 am
Gender: Male

Re: ResScan 3.10 -> 3.14

Postby BernieRay on Thu Apr 14, 2011 2:57 pm

Uncle_Bob wrote:
BernieRay wrote:To be honest, though, what could we gain by displaying this higher capture rate pressure data?


Yep, I aint seeing it and I'm not bothered either :wink:


You still get a star in my book for spotting this. Good eye, sir!
Ray
Diagnosed in 1997

User avatar
DreamDiver
 
Posts: 2510
Joined: Thu Oct 04, 2007 11:19 am
Gender: Male

Re: ResScan 3.10 -> 3.14

Postby DreamDiver on Thu Apr 21, 2011 6:39 am

3.14 hides somewhere off screen in XP Mode on my 64-bit machine. I cannot see the window at all. I cannot use standard practices to get the window back into the viewing space of my monitor. I can see the tab for it on the taskbar, but 'restore' does not work and 'move' is unavailable. When I try to go back to 3.13, I still see the same problem, so it's not version-specific. All I can do is right-click the tab and close. Reboot makes no difference. Has anyone else had this problem?

SOLVED: Never Mind - I figured it out.
Open another program (for instance notepad).
Alt-tab to select ResScan.
Alt-shift-m to move ResScan around.
Use the arrow keys starting most likely with left or down key to shift it around until you see a corner appear on screen.

Anyway, if someone else comes up against this, they'll have a head start.

_________________
Machine: S9 AutoSet™ CPAP Machine
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Pressure: APAP 10.4 | 12
Also using quattro full face alternately - standard/medium
Last edited by DreamDiver on Thu Apr 21, 2011 7:04 am, edited 2 times in total.

greg-g
 
Posts: 216
Joined: Sun Dec 20, 2009 1:07 am
Location: Tasmania Australia
Gender: Male

Re: ResScan 3.10 -> 3.14

Postby greg-g on Thu Apr 21, 2011 6:53 am

I'm running 3.14 on my Windows Ultimate 7 x64 with no problems at all. It like most other 32 bit applications is run from the Program Files (x86) directory and not in XP Mode.
XP mode is only available in the Windows 7 Professional, Ultimate, and Enterprise versions and I admit that while I have it I've never used it.
Sorry I can't be of any further help.

_________________
Machine: S9 AutoSet™ CPAP Machine
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: CMS-50F, Night Vision camera, Hose hanger, ResScan 3.16, Modified Swift FX with head band and air diffuser.

User avatar
DreamDiver
 
Posts: 2510
Joined: Thu Oct 04, 2007 11:19 am
Gender: Male

Re: ResScan 3.10 -> 3.14

Postby DreamDiver on Thu Apr 21, 2011 6:58 am

greg-g wrote:I'm running 3.14 on my Windows Ultimate 7 x64 with no problems at all. It like most other 32 bit applications is run from the Program Files (x86) directory and not in XP Mode.
XP mode is only available in the Windows 7 Professional, Ultimate, and Enterprise versions and I admit that while I have it I've never used it.
Sorry I can't be of any further help.
No worries, I figured it out and posted the fix in the original post. Thanks for your reply. I think it has something to do with the fact that XPMode uses a very resize-able desktop, especially when XP-Mode integration is enabled.

_________________
Machine: S9 AutoSet™ CPAP Machine
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Pressure: APAP 10.4 | 12
Also using quattro full face alternately - standard/medium

User avatar
BobF4
 
Posts: 59
Joined: Wed Mar 21, 2007 9:19 am
Location: Rochester, NY
Gender: Male

Re: ResScan 3.10 -> 3.14

Postby BobF4 on Thu Apr 21, 2011 8:27 pm

I don't have any issues using 3.14 straight from Windows 7 Ultimate x64. No need whatsoever to run it from XP Mode, although I DO have it, as well.

_________________
Machine Mask Humidifier 
Additional Comments: 15,332 hours on old machine (RemStar Pro with C-flex; received 3/3/2003, retired 10/5/2010)
"No matter where you go......there you are."

-- Buckaroo Banzai

User avatar
DreamDiver
 
Posts: 2510
Joined: Thu Oct 04, 2007 11:19 am
Gender: Male

Re: ResScan 3.10 -> 3.14

Postby DreamDiver on Thu Apr 21, 2011 9:05 pm

BobF4 wrote:I don't have any issues using 3.14 straight from Windows 7 Ultimate x64. No need whatsoever to run it from XP Mode, although I DO have it, as well.

I'm beginning to think I have a crappy graphics card... :(

_________________
Machine: S9 AutoSet™ CPAP Machine
Mask: Quattro™ FX Full Face CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Pressure: APAP 10.4 | 12
Also using quattro full face alternately - standard/medium

User avatar
Slartybartfast
 
Posts: 1490
Joined: Wed Sep 01, 2010 12:34 pm
Location: Southern California and an island in Puget Sound.
Gender: None specified

Re: ResScan 3.10 -> 3.14

Postby Slartybartfast on Tue Apr 26, 2011 5:52 pm

Ok, so how come I can't get 3.14 to install on my new 32 bit Intel Atom 1.8 Gig/4 Gig RAM 'puter with Windows 7? Installer says "Unsupported Platform."

_________________
Machine: S9 AutoSet™ CPAP Machine
Mask: Opus 360 Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Climateline Heated Hose, an Intellipap, and too many masks to list!
B.C. (Before CPAP) AHI 73.4/hour; felt lousy, had recurring bronchitis and cough
A.C. (After CPAP) AHI 0.1 - 0.3/hour typical; feeling great. Cough and bronchitis immediately ceased!
I support and volunteer for http://www.rockofafrica.org/ Won't you?

User avatar
Bigd
 
Posts: 23
Joined: Fri Apr 08, 2011 10:59 am
Location: El Cajon, CA
Gender: None specified

Re: ResScan 3.10 -> 3.11

Postby Bigd on Tue Apr 26, 2011 6:01 pm

The release note for 3.11 says there are still some minor problems but gave no indication if what they are.

Hello
These are not problems but what is known in the trade as undocumented features.

User avatar
Slartybartfast
 
Posts: 1490
Joined: Wed Sep 01, 2010 12:34 pm
Location: Southern California and an island in Puget Sound.
Gender: None specified

Re: ResScan 3.10 -> 3.14

Postby Slartybartfast on Tue Apr 26, 2011 6:10 pm

I expect so. Funny, but after saying "Unsupported Platform" and saying, essentially, "G'day, Mate," and dumping me out of the installer, it left an ResScan icon on my desktop. So I double clicked it and it opened. Seems to be OK.

Most odd.

[Ok, now I see what it was. After uninstalling it and then re-installing it, it says ACR-38 Unsupported Platform. So it's apparently the driver for the USB card reader that's all tsemisht, you should pardon the expression.]

_________________
Machine: S9 AutoSet™ CPAP Machine
Mask: Opus 360 Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Climateline Heated Hose, an Intellipap, and too many masks to list!
B.C. (Before CPAP) AHI 73.4/hour; felt lousy, had recurring bronchitis and cough
A.C. (After CPAP) AHI 0.1 - 0.3/hour typical; feeling great. Cough and bronchitis immediately ceased!
I support and volunteer for http://www.rockofafrica.org/ Won't you?

Jenady
 
Posts: 10
Joined: Wed Dec 15, 2010 3:42 pm
Gender: None specified

Re: ResScan 3.10 -> 3.14

Postby Jenady on Thu Apr 28, 2011 1:14 pm

Slartybartfast wrote:I expect so. Funny, but after saying "Unsupported Platform" and saying, essentially, "G'day, Mate," and dumping me out of the installer, it left an ResScan icon on my desktop. So I double clicked it and it opened. Seems to be OK.

Most odd.

[Ok, now I see what it was. After uninstalling it and then re-installing it, it says ACR-38 Unsupported Platform. So it's apparently the driver for the USB card reader that's all tsemisht, you should pardon the expression.]


I just tried to install 3.14 and got the same message. I put my data card in the drive slot of my PC and ran ResScan any way. All appeared to be going great. It showed 16% on the data download and the entire application ended. Ii just went away. I have no idea what I am doing wrong or if it will even work on my PC.

I am running a 64 bit Toshiba with Windows 7.

_________________
Machine Mask Humidifier 
Additional Comments: Trying to use ResScan 3.12

User avatar
Slartybartfast
 
Posts: 1490
Joined: Wed Sep 01, 2010 12:34 pm
Location: Southern California and an island in Puget Sound.
Gender: None specified

Re: ResScan 3.10 -> 3.14

Postby Slartybartfast on Thu Apr 28, 2011 2:30 pm

I'm running the 32 bit version of WIn 7 Home Premium in a new installation. Haven't yet had time to actually try to read my data card, but ResScan seems to be working Ok. At least it grabs and displays detailed data I stored on an external USB hard drive. And of course the .pdf reports I've archived are OK, too.

The ACR38 error at the end of installation bothers me 'cause I didn't have anything plugged into any of the USB ports except my external HD. ACR38 appears to be a standard for USB 2.0 card readers. From reading past posts it appears lots of folks with S8 units had ACR38 related problems.

I'm off to the Pacific Northwest for a few days where my Intellipap is waiting for me, so it's not an issue right away. Hoping someone might know what the problem is.

_________________
Machine: S9 AutoSet™ CPAP Machine
Mask: Opus 360 Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Climateline Heated Hose, an Intellipap, and too many masks to list!
B.C. (Before CPAP) AHI 73.4/hour; felt lousy, had recurring bronchitis and cough
A.C. (After CPAP) AHI 0.1 - 0.3/hour typical; feeling great. Cough and bronchitis immediately ceased!
I support and volunteer for http://www.rockofafrica.org/ Won't you?

User avatar
Breathe Jimbo
 
Posts: 962
Joined: Sun Sep 12, 2010 3:02 pm
Location: Pasadena, CA
Gender: Male

Re: ResScan 3.10 -> 3.14

Postby Breathe Jimbo on Thu Apr 28, 2011 3:19 pm

slart, did you install the drivers? If so, that may be the cause of the message.

_________________
Machine: S9 Elite™ CPAP Machine with EPR™
Mask: Swift™ LT Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Since 9/9/10; 13 cm; ResScan 3.16; SleepyHead 0.9; PapCap

User avatar
Slartybartfast
 
Posts: 1490
Joined: Wed Sep 01, 2010 12:34 pm
Location: Southern California and an island in Puget Sound.
Gender: None specified

Re: ResScan 3.10 -> 3.14

Postby Slartybartfast on Thu Apr 28, 2011 3:54 pm

Nope, didn't know that was required. I clicked on "USB data card reader" when asked where data was going to come from during installation and figured the reason ResScan was asking was so it could install the drivers. So do you have to install the drivers separately? This is my 3rd install/upgrade and I've never seen this error before, nor have I had to mess with data card drivers.

I'm thinking maybe I'll add a partition into my HD and install WIn XP in it and install ResScan there along with all my old software. I've not done a dual boot system before. Should be an adventure. :cry: Maybe WIn 7 is just too new to mess with with some applications.

_________________
Machine: S9 AutoSet™ CPAP Machine
Mask: Opus 360 Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Climateline Heated Hose, an Intellipap, and too many masks to list!
B.C. (Before CPAP) AHI 73.4/hour; felt lousy, had recurring bronchitis and cough
A.C. (After CPAP) AHI 0.1 - 0.3/hour typical; feeling great. Cough and bronchitis immediately ceased!
I support and volunteer for http://www.rockofafrica.org/ Won't you?

User avatar
Breathe Jimbo
 
Posts: 962
Joined: Sun Sep 12, 2010 3:02 pm
Location: Pasadena, CA
Gender: Male

Re: ResScan 3.10 -> 3.14

Postby Breathe Jimbo on Thu Apr 28, 2011 4:03 pm

I would recommend uninstalling and then reinstalling. When you reinstall, do not check any of the boxes. Leave them all unchecked. You do not want to install any of the drivers that ResScan offers for specific hardware. Your system already has the needed drivers. I think the problem is that you installed the drivers for a proprietary ResMed USB card reader when you do not have that proprietary card reader.

_________________
Machine: S9 Elite™ CPAP Machine with EPR™
Mask: Swift™ LT Nasal Pillow CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Since 9/9/10; 13 cm; ResScan 3.16; SleepyHead 0.9; PapCap

PreviousNext

Return to CPAP and Sleep Apnea (CLICK HERE TO READ POSTS)

Who is online

Users browsing this forum: BlackSpinner, Goofproof, howkim, palerider, Sir NoddinOff and 17 guests