ResScan -> 4.02
- torontoCPAPguy
- Posts: 1015
- Joined: Mon Dec 28, 2009 11:27 am
- Location: Toronto Ontario/Buffalo NY
Re: ResScan 3.10 -> 3.14
1. Thank you Uncle Bob!
2. I have been dealing with my OSA effectively for some time now and am using the latest S9 Auto which is great. HOWEVER, newbies should realize that the data from their S9's (etc) is not ALL the data they should be looking for. It is also critically important (at least IMHO and for me) to monitor SpO2 (blood oxygen saturation) through the sleep. It should not drop below 90% at any time or your autonomic nervous system is likely to arouse you (not that way) out of REM if you are lucky enough to make it that deep.... and that is where you need to get to.
Not dreaming? You are likely not making it into REM sleep where the old eyeballs twitch and scare the heck out of your bed mate. What happens when your SpO2 drops under 90% is that the oxygen in the blood is replaced by carbon dioxide, to which the body reacts and gives you a poke to tell you to wake up and breath deeper. At least it did for me. Even with APAP I was not getting a good night of sleep.
Do yourself a favour; get a pulse oximeter (one of the wee fingertip jobs is good) and spread the graph of your SpO2 to match the times on your graphic output from your S9. What you might note is that any events are associated with lowering of SpO2. Not a good thing. Your blood pressure is shooting up. You are not getting REM sleep. Your organs are not being oxygenated properly. You may wake up in a sweat or gasping for air.
In any event, my point is simply that the more data the merrier and we should ALL be making use of it and titrating our pressures to help. I have discovered that I require infused oxygen (only 4L/M) at night to keep me in 'the range'. Without all of this data we collect I would never know. And the difference it has made has not only helped me to a better night of sleep, but has more than likely saved my life as I have developed Atrial Fibrillation in the interim.
AFib + high BP = stroke. "He passed away peacefully in his sleep". There is no such thing as "I don't like wearing the nosebag and I am not going to do it". Your life depends on this data!
So. When I say thanks.... I really mean it.
2. I have been dealing with my OSA effectively for some time now and am using the latest S9 Auto which is great. HOWEVER, newbies should realize that the data from their S9's (etc) is not ALL the data they should be looking for. It is also critically important (at least IMHO and for me) to monitor SpO2 (blood oxygen saturation) through the sleep. It should not drop below 90% at any time or your autonomic nervous system is likely to arouse you (not that way) out of REM if you are lucky enough to make it that deep.... and that is where you need to get to.
Not dreaming? You are likely not making it into REM sleep where the old eyeballs twitch and scare the heck out of your bed mate. What happens when your SpO2 drops under 90% is that the oxygen in the blood is replaced by carbon dioxide, to which the body reacts and gives you a poke to tell you to wake up and breath deeper. At least it did for me. Even with APAP I was not getting a good night of sleep.
Do yourself a favour; get a pulse oximeter (one of the wee fingertip jobs is good) and spread the graph of your SpO2 to match the times on your graphic output from your S9. What you might note is that any events are associated with lowering of SpO2. Not a good thing. Your blood pressure is shooting up. You are not getting REM sleep. Your organs are not being oxygenated properly. You may wake up in a sweat or gasping for air.
In any event, my point is simply that the more data the merrier and we should ALL be making use of it and titrating our pressures to help. I have discovered that I require infused oxygen (only 4L/M) at night to keep me in 'the range'. Without all of this data we collect I would never know. And the difference it has made has not only helped me to a better night of sleep, but has more than likely saved my life as I have developed Atrial Fibrillation in the interim.
AFib + high BP = stroke. "He passed away peacefully in his sleep". There is no such thing as "I don't like wearing the nosebag and I am not going to do it". Your life depends on this data!
So. When I say thanks.... I really mean it.
_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Respironics Everflo Q infusing O2 into APAP line to maintain 95% SaO2; MaxTec Maxflo2 Oxygen Analyzer; Contec CMS50E Recording Pulse Oxymeter |
Fall colours. One of God's gifts. Life is fragile and short, savour every moment no matter what your problems may be. These stunning fall colours from my first outing after surviving a month on life support due to H1N1.
Re: ResScan 3.10 -> 3.14
Thanks Uncle_Bob! Just downloaded it.
DJ
DJ
_________________
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
"Embrace your dreams"- Angeal Hewley
-
- Posts: 2
- Joined: Thu Nov 03, 2011 6:39 pm
Re: ResScan 3.10 -> 3.14
Hello all...new to the forum.
I sure hope not to beat a dead horse but I still can't manage to find the link to the 3.14 ResScan version...As a real doctor I even legitimately registered with ResMed and that is the only thing they are hiding from me haha!
Many thanks to Uncle Bob for the 3.13 version (and everything else you do here)...changing the link to 3.14 (or any variation I can think of) doesn't seem to work.
Seems like this must some "private" matter or I assume Uncle Bob would have just changed his signature...looks like people have had success getting the link PM'd to them...if anyone has it and could PM it to me thanks a lot in advance...
Joe
I sure hope not to beat a dead horse but I still can't manage to find the link to the 3.14 ResScan version...As a real doctor I even legitimately registered with ResMed and that is the only thing they are hiding from me haha!
Many thanks to Uncle Bob for the 3.13 version (and everything else you do here)...changing the link to 3.14 (or any variation I can think of) doesn't seem to work.
Seems like this must some "private" matter or I assume Uncle Bob would have just changed his signature...looks like people have had success getting the link PM'd to them...if anyone has it and could PM it to me thanks a lot in advance...
Joe
_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: ResScan 3.10 -> 3.14
I sent you a Private Message. Check the upper left corner of the screen, under "Search" for User Control Panel (n new messages).DoctorJoe99 wrote:Hello all...new to the forum.
I sure hope not to beat a dead horse but I still can't manage to find the link to the 3.14 ResScan version...As a real doctor I even legitimately registered with ResMed and that is the only thing they are hiding from me haha!
Many thanks to Uncle Bob for the 3.13 version (and everything else you do here)...changing the link to 3.14 (or any variation I can think of) doesn't seem to work.
Seems like this must some "private" matter or I assume Uncle Bob would have just changed his signature...looks like people have had success getting the link PM'd to them...if anyone has it and could PM it to me thanks a lot in advance...
Joe
-
- Posts: 2
- Joined: Thu Nov 03, 2011 6:39 pm
Re: ResScan 3.10 -> 3.14
Many thanks to Pugsy and JeffL...Got the link.
Looks like ResMed might be making it more difficult to get the 3.14 version for patients for liability reasons...as we have to "agree to use the software under the direction of a physician".
I guess life would be no fun without all these hoops haha!
Dr. Joe
Looks like ResMed might be making it more difficult to get the 3.14 version for patients for liability reasons...as we have to "agree to use the software under the direction of a physician".
I guess life would be no fun without all these hoops haha!
Dr. Joe
_________________
Mask: Swift™ FX Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: ResScan 3.10 -> 3.14
Can you please send me the link for ResScan 3.14? Thanks! Does it work with the S9 Escape Auto? My Datalog directory appears to be empty on the SD card but there are updated files in the root of the card.
_________________
Mask: Mirage™ FX For Her Nasal CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Re: ResScan 3.10 -> 3.14
It will work but unfortunately the only data that is on the SD card from the S9 Escape Auto is hours of use, AHI and pressure. No leak data, no flow data, no event breakdown in the AHI. Without leak data no way to know if the AHI is accurate.moralecl wrote:Does it work with the S9 Escape Auto?
_________________
Machine: AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier |
Additional Comments: Mask Bleep Eclipse https://bleepsleep.com/the-eclipse/ |
I may have to RISE but I refuse to SHINE.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
If you want to try the Eclipse mask and want a special promo code to get a little off the price...send me a private message.
- Perrybucsdad
- Posts: 834
- Joined: Mon Sep 12, 2011 7:09 am
- Location: Northeast Ohio
Re: ResScan 3.10 -> 3.14
If you look at the very first post of this topic, in the signature for Uncle_Bob, you will see the link.moralecl wrote:Can you please send me the link for ResScan 3.14? Thanks! Does it work with the S9 Escape Auto? My Datalog directory appears to be empty on the SD card but there are updated files in the root of the card.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: ResScan v5.9; Sleepyhead v1.0.0-beta |
Re: ResScan 3.10 -> 3.14
Someone please PM me the link for downloading ResScan 3.14? Thanks in advance!
I'm a new S9 Auto user. Just started last night.
I'm a new S9 Auto user. Just started last night.
_________________
Mask: Mirage™ FX Nasal CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Software: SleepyHead v0.9.2-2 (beta), Actigraphy: LARK Pro |
- Perrybucsdad
- Posts: 834
- Joined: Mon Sep 12, 2011 7:09 am
- Location: Northeast Ohio
Re: ResScan 3.10 -> 3.14
As stated immediately before this post, If you look at the very first post of this topic, in the signature for Uncle_Bob, you will see the link.
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: AirFit™ P10 Nasal Pillow CPAP Mask with Headgear |
Additional Comments: ResScan v5.9; Sleepyhead v1.0.0-beta |
- TheTwinsMom1
- Posts: 133
- Joined: Thu Apr 08, 2010 1:18 pm
Re: ResScan 3.10 -> 3.14
nm. I found it.
_________________
Mask: Swift™ FX For Her Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
APAP Pressure of 12-20, EPR of 3, CMS-50F Oximeter, PapCap, and Regenesis Pillow. 200mg Provigil in the AM. Also diagnosed with Idiopathic Hypersomnia.
Re: ResScan 3.10 -> 3.14
Good evening,
I live in France and I am a new user S9 Auto.
Outside of having problems during the night (I wake up and can no longer sleep), I am looking for the link to download ResScan 3.14?
Thank you in advance.
I live in France and I am a new user S9 Auto.
Outside of having problems during the night (I wake up and can no longer sleep), I am looking for the link to download ResScan 3.14?
Thank you in advance.
- Breathe Jimbo
- Posts: 954
- Joined: Sun Sep 12, 2010 3:02 pm
- Location: Pasadena, CA
Re: ResScan 3.10 -> 3.14
Look in the signature of any message of Uncle_Bob for the link.
_________________
Mask: Swift™ LT Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Since 9/9/10; 13 cm; ResScan 3.16; SleepyHead 0.9; PapCap |
Re: ResScan 3.10 -> 3.14
I want to install Resscan on my new Ultrabook.
Can I get a link?
Can I get a link?
- Lizistired
- Posts: 2835
- Joined: Tue Dec 14, 2010 10:47 pm
- Location: Indiana
Re: ResScan 3.10 -> 3.14
Read up.
_________________
Mask: Swift™ LT Nasal Pillow CPAP Mask with Headgear |
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control |
Additional Comments: Swift FX sometimes, CMS-50F, Cervical collar sometimes, White noise, Zeo... I'm not well, but I'm better. |
ResScan: http://www.resmed.com/int/assets/html/s ... c=patients
ResScan Tutorial- http://montfordhouse.com/cpap/resscan_tutorial/
Machines Video: http://www.cpaplibrary.com/machine-education
ResScan Tutorial- http://montfordhouse.com/cpap/resscan_tutorial/
Machines Video: http://www.cpaplibrary.com/machine-education