Resmed S9 Software - Where can I get it?

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
User avatar
Disco
Posts: 11
Joined: Fri Mar 12, 2010 1:43 am

Resmed S9 Software - Where can I get it?

Post by Disco » Fri Mar 12, 2010 2:07 am

Hi there,
I'm new at this, and only just been diagnosed. I need some help. Just picked up a new S9 Autoset machine (my first one), and it didn't come with any software to check my results. Which version of rescan software suits the S9? Are there any links which I can download the software (hopefully for free)? Also how do I cahnge the upper pressure limit on my machine? Your help is greatly appreciated.

_________________
MaskHumidifier

User avatar
dave21
Posts: 720
Joined: Tue Mar 09, 2010 1:05 am
Location: United Kingdom

Re: Resmed S9 Software - Where can I get it?

Post by dave21 » Fri Mar 12, 2010 2:20 am

I PM'd you. In terms of setting the pressure limit, the machine will be in AUTO mode, so it will increase the pressure as it sees fit. You can change the upper or lower pressure limits by going into the Clinicians menu by holding down the SETUP and dial buttons for 3 seconds, but I would strongly advise checking with your doctor before changing these options as you might do yourself more harm than good if you don't know what your titrated settings are.

If your doctor hasn't setup your machine correctly to your titrated levels in a sleep study then you should be able to change the minimum and maximum pressures. You can also set the RAMP time on the main front menu if you find the pressure too much for up to 30 minutes.

Good luck with the machine!

_________________
Machine
Additional Comments: Running AirSense 10 AutoSet CPAP, previously S9 AutoSet and S8 AutoSet Spirit
Image

User avatar
LSAT
Posts: 13229
Joined: Sun Nov 16, 2008 10:11 am
Location: SE Wisconsin

Re: Resmed S9 Software - Where can I get it?

Post by LSAT » Fri Mar 12, 2010 6:36 am

Disco....With your S9 machine you should be able to see your results daily on the screen without the software.

_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier
Mask: Fisher & Paykel Vitera Full Face Mask with Headgear (S, M, or L Cushion)
Additional Comments: Back up is S9 Autoset...... Buckwheat hull pillow

User avatar
jmelby
Posts: 463
Joined: Sat Nov 14, 2009 7:52 pm
Location: Minneapolis, MN

Re: Resmed S9 Software - Where can I get it?

Post by jmelby » Fri Mar 12, 2010 7:53 am

LSAT wrote:Disco....With your S9 machine you should be able to see your results daily on the screen without the software.
Yep--just hold down the Info and Setup buttons for 3 seconds and then you can get to the detailed results (shows AHI, OAI, CAI) right on the display. You can also set in the clinical menu to show the AHI number daily under the regular patient Info by setting "Sleep Quality" to "On".

_________________
Mask: Mirage Activa™ LT Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: ResScan 3.12, APAP 9 - 13, no EPR, ClimateControl 75F
(yet another Jeff)

pjk000
Posts: 3
Joined: Thu Mar 11, 2010 5:37 pm

Re: Resmed S9 Software - Where can I get it?

Post by pjk000 » Fri Mar 12, 2010 8:13 am

can someone pm me?

_________________
MaskHumidifier

User avatar
Disco
Posts: 11
Joined: Fri Mar 12, 2010 1:43 am

Re: Resmed S9 Software - Where can I get it?

Post by Disco » Sun Mar 14, 2010 3:28 am

THANKS FOR THE INFO & pm

_________________
MaskHumidifier

Veridor
Posts: 19
Joined: Sun Mar 21, 2010 8:23 am

Re: Resmed S9 Software - Where can I get it?

Post by Veridor » Tue Mar 23, 2010 6:32 am

I just got an S9 myself and am having trouble finding the software. Is there somewhere we can download it from?

_________________
Mask: Mirage™ SoftGel Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Currently in CPAP mode at 12 cm.

User avatar
Disco
Posts: 11
Joined: Fri Mar 12, 2010 1:43 am

Re: Resmed S9 Software - Where can I get it?

Post by Disco » Tue Mar 23, 2010 7:13 am

Veridor wrote:I just got an S9 myself and am having trouble finding the software. Is there somewhere we can download it from?
http://www.resmed.com/int/assets/html/s ... ister.html

_________________
MaskHumidifier

User avatar
Disco
Posts: 11
Joined: Fri Mar 12, 2010 1:43 am

Re: Resmed S9 Software - Where can I get it?

Post by Disco » Tue Mar 23, 2010 7:14 am


_________________
MaskHumidifier

Veridor
Posts: 19
Joined: Sun Mar 21, 2010 8:23 am

Re: Resmed S9 Software - Where can I get it?

Post by Veridor » Tue Mar 23, 2010 8:07 am

Thanks, Disco.

_________________
Mask: Mirage™ SoftGel Nasal CPAP Mask with Headgear
Humidifier: S9™ Series H5i™ Heated Humidifier with Climate Control
Additional Comments: Currently in CPAP mode at 12 cm.

KarmicLynx
Posts: 9
Joined: Wed Mar 24, 2010 2:24 pm
Location: Kansas

Re: Resmed S9 Software - Where can I get it?

Post by KarmicLynx » Wed Mar 24, 2010 2:30 pm

I was just diagnosed with 99 events per hour from a sleep study. I'll be going back in to determine what pressure I need for my cpap and then I plan on getting an S9. Where can I get the software?

KL

_________________
Mask

narnerd
Posts: 2
Joined: Thu Mar 25, 2010 12:25 pm

Re: Resmed S9 Software - Where can I get it?

Post by narnerd » Thu Mar 25, 2010 12:33 pm

I have been using Encorepro software to monitor my use of remstar auto for about 5 years. Next week I will be switching to Resmed S9 and would like to continue close monitoring of my apap use. Can someone direct me as to how to obtain appropriate software? Thanks so much.

_________________
MaskHumidifier
Additional Comments: Actually ResScan Version 3.10

nittalagh
Posts: 12
Joined: Thu Mar 25, 2010 12:54 pm

Re: Resmed S9 Software - Where can I get it?

Post by nittalagh » Thu Mar 25, 2010 1:02 pm

I too just got my S9. Can someone PM me with software inforamation?
THANKS

_________________
MaskHumidifier

ineedasnooze
Posts: 9
Joined: Thu Mar 25, 2010 1:48 am

Re: Resmed S9 Software - Where can I get it?

Post by ineedasnooze » Thu Mar 25, 2010 2:48 pm

when i hold downinfo/setup on mine, i can see all the info for settings, ie max and min pressure etc, but I can CHANGE anything......

to use rescan dont you need to buy the smart card usb dongle thingy?

User avatar
Uncle_Bob
Posts: 2777
Joined: Tue Feb 24, 2009 12:10 pm
Location: Arizona

Re: Resmed S9 Software - Where can I get it?

Post by Uncle_Bob » Thu Mar 25, 2010 2:51 pm

ineedasnooze wrote:when i hold downinfo/setup on mine, i can see all the info for settings, ie max and min pressure etc, but I can CHANGE anything......

to use rescan dont you need to buy the smart card usb dongle thingy?
No the S9 uses a standard SD card, there should be one in the back of your machine just above the filter. give it a little push in and it will spring out.
You will either need a PC with a built in card reader or you can buy a very inexpensive reader.