Encore Pro 2 software

General Discussion on any topic relating to CPAP and/or Sleep Apnea.
bertdoozer

Encore Pro 2 software

Post by bertdoozer » Fri Feb 05, 2010 4:28 am

Does anyone know where i can get a copy of this from please.

Stu

User avatar
josef
Posts: 63
Joined: Sun Dec 13, 2009 1:03 pm
Location: South Texas

Re: Encore Pro 2 software

Post by josef » Fri Feb 05, 2010 6:18 am

I got 1.8 and 2.2 both from a site for free. I am now running 2.2 with Vista, no problem. I was asked to remove the link as the CPAP cops shut them down at ever opertunity. If anyone wants this link just pm me and I will see that you receive it. I will probably end up in CPAP prison for helping but so be it. My Father explained to me the difference between a Pimple and a Boil, seems that it depends on whose Bottom it's on, if someone elses, it's merely a Pimple, if it's mine, it's obviously major surgery. I am also Diabetic and find the difference in treatment between that and Sleep Aepena similar to the treatment differences between children and adults, simply ludicrous at best.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: I recently bought a CMS-50E OLED Fingertip Pulse Oximeter. It does miniture sleep studies.
Last edited by josef on Sat Feb 06, 2010 7:49 am, edited 1 time in total.
Josef

User avatar
bertdoozer
Posts: 15
Joined: Fri Feb 05, 2010 5:05 am
Location: Australia

Re: Encore Pro 2 software

Post by bertdoozer » Fri Feb 05, 2010 6:24 am

Thanks for that I will have a look.

Stu

_________________
Mask: Swift™ LT Nasal Pillow CPAP Mask with Headgear
Additional Comments: On Trial

User avatar
Paul254
Posts: 21
Joined: Mon Nov 30, 2009 11:27 am

Re: Encore Pro 2 software

Post by Paul254 » Fri Feb 05, 2010 7:20 am

Is this the user software for the PR System One?

_________________
Mask: Mirage™ SoftGel Nasal CPAP Mask with Headgear
Additional Comments: Respironics Chinstrap; Settings: Pressure=10 CM H2O, Humidifier=2, CFlex=2; Software: Encore Pro 2.2

User avatar
FinceMgr
Posts: 58
Joined: Thu Oct 15, 2009 2:18 pm
Location: The High Desert, CA

Re: Encore Pro 2 software

Post by FinceMgr » Fri Feb 05, 2010 8:55 am

Encore Pro is the Clinician or Dr. version of the software which offers full functionality vs Encore Viewer which just allows one to view the data. Frankly most clinicians are no better qualified to use Encore Pro then you. One needs version 2 or above to access PRS1 machines like yours.

Sleep long and prosper!
Paul254 wrote:Is this the user software for the PR System One?

packer
Posts: 222
Joined: Sun Jan 14, 2007 2:08 pm
Location: Wisconsiin

Re: Encore Pro 2 software

Post by packer » Fri Feb 05, 2010 12:03 pm

sounds like older computer- or really, older windows- works best

on older xp desktop- worked first time- just stick little sd card in right slot on computer-
downloaded - updated- results and waveforms- works easy

just from reading- sounds like windows 7 and new encore dont play well together

User avatar
mdboze
Posts: 58
Joined: Mon Jan 25, 2010 10:54 pm
Location: Round Rock, TX (basically Austin, TX)
Contact:

Re: Encore Pro 2 software

Post by mdboze » Fri Feb 05, 2010 10:24 pm

Encore Pro2 does not work with SmartCard Reader :
SCM Microsystems
model # SCR3310

at least it was only $17.00

_________________
Mask
Additional Comments: My Machine: Respironics autoSV Advanced with SmartCard & Humidifier. Model# 1042906
Resp Bipap AutoSV Adv & humidifier
BPM: Auto ---PRES Max:20cm
EPAP Max:6 -- EPAP Min:6
PS Max: 14 -----PS Min:5
Encore Pro 2.2, Smt Crd Reader DT3500
Mask: Respironics True Blue

User avatar
Gerryk
Posts: 1565
Joined: Thu Jan 01, 2009 11:18 am
Location: Chicago suburbs

Re: Encore Pro 2 software

Post by Gerryk » Fri Feb 05, 2010 10:29 pm

Thats funny, I have been using Encore Pro with my smart card reader now since mid December on this computer and even before that on the old system.

If your reader isn't working check your settings.

Gerry

User avatar
josef
Posts: 63
Joined: Sun Dec 13, 2009 1:03 pm
Location: South Texas

Re: Encore Pro 2 software

Post by josef » Sat Feb 06, 2010 7:59 am

I got 1.8 and 2.2 both from a site for free. I am now running 2.2 with Vista, no problem. I was asked to remove the link as the CPAP cops shut them down at ever opertunity. If anyone wants this link just pm me and I will see that you receive it. I will probably end up in CPAP prison for helping but so be it. My Father explained to me the difference between a Pimple and a Boil, seems that it depends on whose Bottom it's on, if someone elses, it's merely a Pimple, if it's mine, it's obviously major surgery. I am also Diabetic and find the difference in treatment between that and Sleep Aepena similar to the treatment differences between children and adults, simply ludicrous at best.

_________________
Mask: Mirage Quattro™ Full Face CPAP Mask with Headgear
Additional Comments: I recently bought a CMS-50E OLED Fingertip Pulse Oximeter. It does miniture sleep studies.
Josef

User avatar
mdboze
Posts: 58
Joined: Mon Jan 25, 2010 10:54 pm
Location: Round Rock, TX (basically Austin, TX)
Contact:

Re: Encore Pro 2 software

Post by mdboze » Sat Feb 06, 2010 9:56 am

Gerryk wrote:Thats funny, I have been using Encore Pro with my smart card reader now since mid December on this computer and even before that on the old system.

If your reader isn't working check your settings.

Gerry
I meant that I can't get Encore Pro2 to work with my SmartCard Reader that is made by SCM Microsystems, model # SCR3310.

I don't think this card reader is compatible with the Respironics smart card.

Are you using a SCM Microsystems, model # SCR3310 smart card reader ?

_________________
Mask
Additional Comments: My Machine: Respironics autoSV Advanced with SmartCard & Humidifier. Model# 1042906
Resp Bipap AutoSV Adv & humidifier
BPM: Auto ---PRES Max:20cm
EPAP Max:6 -- EPAP Min:6
PS Max: 14 -----PS Min:5
Encore Pro 2.2, Smt Crd Reader DT3500
Mask: Respironics True Blue

ClayL
Posts: 369
Joined: Mon Feb 12, 2007 8:45 am
Location: Palisade, CO now, was Full time in a motor home for 12 years- Anywhere USA

Re: Encore Pro 2 software

Post by ClayL » Sat Feb 06, 2010 4:22 pm

mdboze wrote: SNIP
I meant that I can't get Encore Pro2 to work with my SmartCard Reader that is made by SCM Microsystems, model # SCR3310.

I don't think this card reader is compatible with the Respironics smart card.

Are you using a SCM Microsystems, model # SCR3310 smart card reader ?
I could not use the drivers that came with my INFINEER card reader. I had to get one from http://www.ais-magnetic.com/e/download_ ... p?id=23390
May not be your problem but thought I would mention it.
Respironics DreamStation
Pressure = 11.5 min 14.5 max
C-Flex = 1

Dreamwear FF

cflame1
Posts: 3312
Joined: Sat Mar 11, 2006 6:55 am
Location: expat Canadian in Kentucky

Re: Encore Pro 2 software

Post by cflame1 » Sat Feb 06, 2010 4:56 pm

mdboze wrote:
Gerryk wrote:Thats funny, I have been using Encore Pro with my smart card reader now since mid December on this computer and even before that on the old system.

If your reader isn't working check your settings.

Gerry
I meant that I can't get Encore Pro2 to work with my SmartCard Reader that is made by SCM Microsystems, model # SCR3310.

I don't think this card reader is compatible with the Respironics smart card.

Are you using a SCM Microsystems, model # SCR3310 smart card reader ?
You can only use a specific card reader... a DT3500 in particular with Respironics smart cards.

_________________
Mask: Hybrid Full Face CPAP Mask with Nasal Pillows and Headgear
Additional Comments: also have various other masks and a Legacy Remstar Auto Bipap with BiFlex

User avatar
bertdoozer
Posts: 15
Joined: Fri Feb 05, 2010 5:05 am
Location: Australia

Re: Encore Pro 2 software

Post by bertdoozer » Sat Feb 06, 2010 6:24 pm

Paul254 wrote:Is this the user software for the PR System One?
its one that works with it.

Stu

_________________
Mask: Swift™ LT Nasal Pillow CPAP Mask with Headgear
Additional Comments: On Trial

User avatar
barry15
Posts: 53
Joined: Sat Dec 26, 2009 12:28 pm
Location: Seattle Washington

Re: Encore Pro 2 software

Post by barry15 » Sat Feb 06, 2010 9:13 pm

cflame1 wrote: You can only use a specific card reader... a DT3500 in particular with Respironics smart cards.
Sorry, that may have been true at an earlier time, but I can read my Smart Card for my System One Respironics Auto with a cheap card read made by some company called SD/MS. I am sure that almost any card reader would work. I am talking about Encore Pro 2.2 software. If you are trying to read it with other software, then I have no experience with it.

Barry

tomjax2
Posts: 15
Joined: Sat Dec 05, 2009 5:58 am

Re: Encore Pro 2 software

Post by tomjax2 » Sat Feb 06, 2010 9:23 pm

I cannot send a PM after trying everything I know.

I have vista and my old s/w does not work- I think


I have not even tried to install it

wouold like site for the s/w.

any thoughts RG?
write me at tomjax@yahoo.com

Locked