Page 1 of 1

Swift LT Fix

Posted: Thu Jul 23, 2009 7:56 pm
by jules
The headgear slips on my hair and comes loose so to keep it in place and also to help anchor the pillows I added an elastic band - I used a yard of 1/4 wide black elastic

The elastic is looped over the bottom piece of the headgear and tied to the right size (tie the first time you put this on)

Image

Put the mask on and then put the elastic band into the "slots" on both sides of the headgear - follow the pink arrow (tie it to size the first time) - each night I need to spend a minute or so adjusting it to feel best

Image

It will then look in front like

Image

and in back like

Image

Re: Swift LT Fix

Posted: Thu Jul 23, 2009 8:03 pm
by jdm2857
So the elastic is a loop tied around the back of the lower strap. and each side of the loop goes around the little tabs above the pillows on the headset.

Is this right?

Re: Swift LT Fix

Posted: Thu Jul 23, 2009 8:10 pm
by jules
jdm2857 wrote:So the elastic is a loop tied around the back of the lower strap. and each side of the loop goes around the little tabs above the pillows on the headset.

Is this right?
Yes -it is loose on the lower strap then you put it on the middle as you set everything in place for the night


==========================================

This is same fix for the Original Swift - would work for Swift II also - the elastic happened to be in 2 pieces that time - part white - part black but it was also a loop through the triangles this time

Image

Re: Swift LT Fix

Posted: Fri Jul 24, 2009 12:08 am
by Marietjie
Image

J U L E S ! ! ! for sharing your 'fix' plan with us.
I'm going to try it out.