Page 5 of 5

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Mon Feb 22, 2010 11:46 am
by Wulfman
Squirrels wrote:Is there any way I could get a copy of the professional manual? I have lost 50 lbs and need to adjust my pressure. I have remstar pro w c-flex.

Thanks,

Cheryl

tjmiller2@mchsi.com
WHICH "REMstar Pro w/C-Flex" do you have? Is it the older Legacy model (like is in my profile) or is it the "M Series Pro"?

If it's the one like is in my profile, the setup instructions will look something like this.

Den


REMstar Pro 2 Setup

When in the Setup Menu, the humidifier ^ and ramp v buttons operate as up and down keys to change the settings, the left/right user buttons < > allow you to go to the previous/next question or setting, and the pressure start/stop button is used to exit the Setup Menu. Holding the humidifier or ramp buttons down will cause the values to change more quickly.

To enter the Therapy Setup Menu, hold the two top user buttons < > down while plugging in the power cord.
Continue holding the buttons down until the REMstar Pro 2 with C-Flex beeps twice.

Note: The word "setup" will appear on all of the screens indicating that you are in the Therapy Setup Menu.
If you press the Pressure start/stop button, you will exit the Setup Menu.

a. Compliance hours/nights: (recommend leaving alone, but CAN be cleared at this point)
Select next setting with >

b. Therapy mode: (CPAP or CFLE) select with ^ or v
Select next setting with >

c. CPAP or CFLE pressure setting: Select with ^ or v
Select next setting with >

d. C-Flex mode (if you chose CFLE mode): Select setting 1, 2 or 3 with ^
Select next setting with >

e: Ramp time setting: Select with ^ or v
(ramp time will be turned off with a setting of 0:00)
Select next setting with >

f. Ramp pressure setting: Select with ^ or v
Select next setting with >

g. Patient disconnect setting: 1 = on 0 = off Select with ^ or v
Select next setting with >

h. Buttons lights setting: 1 = on 0 = off Select with ^ or v

(Last setting. Use On/Off button to exit Setup)


--------------------------------------------------------------------------------------------------

If it's the M Series Pro, the setup goes something like this.

Hold down the <- -> buttons while plugging in the little power cord in the back, wait for 2 beeps release buttons. Then press the + key to enter setup mode, use the <- -> buttons to move to the next field, use the -/+ keys to decrease/increase values, when set press the On/Off button to exit Setup.

Therapy Mode = CPAP
CPAP Pressure = NN (only appears in CPAP mode).
C-Flex Setting = Off, 1, 2 or 3
Ramp Time = (0:05 to 0:45)
Ramp Start Pressure = 4.0cm (can be from 4cm to AutoMin pressure).
Mask Alert = On/Off (beeps on large leak, mask removal).
Auto Off = Off (turns off machine on large leak/mask removal) Suggest leaving it "Off"
Show AHI/Leak = On (enables logging to display) Suggest leaving it "On"
Patient Reminder = Off (days to remind you that you get a new mask w/Insurance).
returns to Therapy Mode =




==========Resetting LCD Display Data====================

To reset LCD Therapy data (does NOT erase any data from SmartCard):

1. Hold down the (<-) (->) buttons while plugging in the power on the back,
wait for 2 beeps or 5 seconds, release buttons.
2. Press the (->) key and navigate to Therapy screen.
3. Press and HOLD down the (-) minus key for 5 seconds and/or until therapy data is reset to Zero.
4. Press the (->) key to scroll back to main menu, press (+) key to enter Setup or
On/Off button to exit.



.

Many of them can be downloaded from this site:

http://www.apneaboard.com/CPAP%20Adjustment.htm

.

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Mon Aug 23, 2010 7:27 pm
by cplad
Jerry,

Would appreciate your sending one my way also.

cplad@airmail.net

Many thanks!

Cindy

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Mon Aug 23, 2010 7:36 pm
by 6PtStar
Sent!! Check your e-mail.

Jerry

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Tue Oct 19, 2010 1:11 am
by Raul c
Could you please send me the provider manual for the respironics bipap auto m series machine. Thanks so much.
Rhc (at) San (dot) rr (dot) com

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Mon Nov 01, 2010 4:58 pm
by Edwardian8
Hi Jerry, would you please email me a provider manual for the Respironics REMstar Auto A-Flex CPAP? Thanks!!!!

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Mon Nov 15, 2010 12:48 am
by sleepytete
would someone email me Respironics BiPAP Auto M Series Provider Manual to set up the max pressures , email address is: nadimdaou_at_yahoo_dot_com

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Mon Jan 31, 2011 2:06 pm
by lavonnag
Hey Jerry,
Do you have one more manual left in you? I have the BiPap Auto M Series as well. I really appreciate it and will sleep happily after!

thanks,
Lavonna

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Tue Feb 22, 2011 8:48 pm
by kymba
Hi Jerry

I have a "REMstar Plus M Series" model 201M. any chance you could email a copy of the manual to thekymba_AT_gmail_DOT_com

Thanks champ!

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Sun Jun 05, 2011 4:47 pm
by danfortune5000
Could you please send me the provider manual for the respironics bipap auto m series machine. Thanks so much.

dan@fortune.org

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Sun Nov 20, 2011 9:53 am
by charcot
Can any one please send me an RESPIRONIC BiPAP AUTO 701 PROGRAMING MANUAL if possible
I need to reset the personal settings.
Thanks Rick

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Sun Nov 20, 2011 9:58 am
by Pugsy
When people do not register to the forum we can't "send" anything to you.
Manuals for about all machines can be found here. Some by direct download and some by email request. Just make sure you specify exact name and model.
http://www.apneaboard.com/CPAP%20Adjustment.htm

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Thu Sep 05, 2013 3:21 pm
by riffdr
Hi, I am looking for the same manual for my father, I did not find a download link in the forums and searches under the word "espironics bipap auto m series with biflex" do not return any results... Can anybody please send the manual to my email address revistaciney @ gmail .com? Thank you so much

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Wed Oct 02, 2013 8:52 pm
by leroycraft
Hi,
Just found this site. I would like to request a Provider Manual for the Respironics Bipap Auto M Series machine.
email at lstillings@ymail.com
Thanks.

Re: Bipap Auto M Series Provider Manual (Respironics)

Posted: Wed Oct 02, 2013 10:07 pm
by Pugsy
Clinical manuals can be requested here
http://www.apneaboard.com/adjust-cpap-p ... tup-manual