Your advices are very precious and you are generous and kind people.
Do not think that I am too mieloso!
I live my therapy in total solitude.
I started in September 2015 and still today, no doctor has seen my sleep data.
There are no free forum in my country and I can not talk about my CPAP with anyone.
I do not know you but, you are my best friends for therapy.
Thanks so much
Resmed Airfit F10 mask very "light"
- Oltremare
- Posts: 187
- Joined: Tue Dec 29, 2015 7:01 pm
- Location: On the other side of the sea - Italy
Re: Resmed Airfit F10 mask very "light"
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Additional Comments: Quattro FX FF mask > CMS50D+ pulse oximeter > Climate line > Settings: auto-CPAP pressure Min 11.00 Max 18.0 EPR 3 |
I hope you will forgive my language errors. To write in English I use a translator online. Thank you
- chunkyfrog
- Posts: 34390
- Joined: Mon Jul 12, 2010 5:10 pm
- Location: Nebraska--I am sworn to keep the secret of this paradise.
Re: Resmed Airfit F10 mask very "light"
I have heard a DME state that ALL cpap equipment sold online is counterfeit.
Sour grapes, I'm sure.
Sour grapes, I'm sure.
_________________
Mask: AirFit™ P10 For Her Nasal Pillow CPAP Mask with Headgear |
Additional Comments: Airsense 10 Autoset for Her |
- Oltremare
- Posts: 187
- Joined: Tue Dec 29, 2015 7:01 pm
- Location: On the other side of the sea - Italy
Re: Resmed Airfit F10 mask very "light"
Yesterday I took your advice and I printed your pattern. Then I made a mask liner cotton.Okie bipap wrote:If you want to make your own mask liner, here is a link to a pattern that is quite similar to a commercial brand. I have used it in the past to make my own mask liners out of an old tee shirt. The pattern is a small size. If you need a larger liner, you can enlarge it as necessary. http://montfordhouse.com/cpap/diy-cotton-mask-liner.pdf
It seems that it works well, but during sleep slipped away.
I have to invent some way to hold it in place.
Thank you
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Additional Comments: Quattro FX FF mask > CMS50D+ pulse oximeter > Climate line > Settings: auto-CPAP pressure Min 11.00 Max 18.0 EPR 3 |
I hope you will forgive my language errors. To write in English I use a translator online. Thank you
- Oltremare
- Posts: 187
- Joined: Tue Dec 29, 2015 7:01 pm
- Location: On the other side of the sea - Italy
Re: Resmed Airfit F10 mask very "light"
With Airfit F10 I have air leaks near the eyes, especially when I sleep on the side and the mask sinks into the pillow.
I have observed that, if the tube comes from below, leverages and losses increase.
If the hose goes down from the top, the situation improved a lot.
Theory of small steps, ok!
Tonight AHI = 0.1
I have observed that, if the tube comes from below, leverages and losses increase.
If the hose goes down from the top, the situation improved a lot.
Theory of small steps, ok!
Tonight AHI = 0.1
_________________
Machine: ResMed AirSense™ 10 AutoSet™ CPAP Machine with HumidAir™ Heated Humidifier |
Mask: ResMed AirFit™ F20 Full Face CPAP Mask with Headgear |
Additional Comments: Quattro FX FF mask > CMS50D+ pulse oximeter > Climate line > Settings: auto-CPAP pressure Min 11.00 Max 18.0 EPR 3 |
I hope you will forgive my language errors. To write in English I use a translator online. Thank you